Built-in Appliances Experience the Miele difference - Euro Appliances

Building-in diagrams
Gas hob
KM 391 G
Cooker hood
DA 396-5
Cooker hood
DA 399-5
1
) Front
2
) Mains connection box
3
) Gas connection
Space behind hob 50 mm
Space to wall or tall unit at side of hob 150 mm
Note: This hob can be fitted above a Miele oven, in which
case the worktop must be at least 40 mm thick.
1 ) Extraction
2 ) Recirculation
3 ) Venting grille position at the top for recirculation
4+5 ) Vent cut-out positions (Area 5 not required for
recirculation mode)
1 ) Extraction
2 ) Recirculation
3 ) Venting grille position at the top for recirculation
4+5 ) Vent cut-out positions (Area 5 not required for
recirculation mode)
Cooker hood
DA 5495 W
Cooker hood
DA 249-4/DA 249-4 EXT
Cooker hood
DA 6290 W (Lumen)
1 ) Extraction
2 ) Recirculation
3 ) Venting grille position at the top for recirculation
4+5 ) Vent cut-out positions (Area 5 not required for
recirculation mode)
1 ) Extraction
2 ) Recirculation
3 ) Ventilation grilles at the top for recirculation
4+5 ) Vent cut-out positions (Area 5 not required for
recirculation)
S: Safety distance between cooker hood and hob
1 ) Extraction
2 ) Recirculation
3 ) Ventilation grilles at the top for recirculation
4+5 ) Vent cut-out positions (Area 5 not required for
recirculation)
Cooker hood
DA 289-4/DA 289-4 EXT
Cooker hood
DA 5330 W
Cooker hood
DA 5320 W
1 ) Installation area
2 ) Area for vent cut-out if ducting to be laid through the
ceiling
* Safety distance between cooker hood and hob:
min. 365 mm
1 ) Extraction
2 ) Recirculation
3 ) Ventilation grilles at the top for recirculation
4+5 ) Vent cut-out positions (Area 5 not required for
recirculation)
* Safety distance between cooker hood and hob:
min. 350 mm
Shaded area for vent cut-out
106