Vaderstad Rapid A Drill Brochure - LiveUpdater
Vaderstad Rapid A Drill Brochure - LiveUpdater
Vaderstad Rapid A Drill Brochure - LiveUpdater
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Rapid</strong> A 400S/450S<br />
The <strong>Rapid</strong> A 400S ist the most<br />
popular A model machine.<br />
The <strong>Rapid</strong> A 400S and 450S<br />
consist of three sections. The<br />
front tools on the wing sections<br />
are operated by the middle<br />
section´s hydraulic ram<br />
whilst the depth setting on the<br />
wings are set with levers. The<br />
<strong>Rapid</strong> A 400S and 450S drills<br />
are hydraulically foldable for 3<br />
metre transport width.<br />
<strong>Rapid</strong> A 600S<br />
This is the versatile workhorse<br />
amongst the <strong>Rapid</strong> A drills.<br />
The <strong>Rapid</strong> A 600S is a three<br />
sectioned machine with the<br />
tools and the depth setting on<br />
the wings fully hydraulically<br />
governed by Väderstad’s<br />
Master and Slave System. The<br />
depth setting is achieved centrally<br />
in one place by adjusting<br />
the depth control setting on<br />
the master ram, which only<br />
takes seconds.<br />
The power requirement for<br />
<strong>Rapid</strong> drills is about 30 - 40 Hp<br />
per metre working width depending<br />
on front tools on the drill,<br />
working speed, soil type, degree<br />
of hills and tillage system.