RF Connectors Complete Catalog Download

More documents

Recommendations

Info

TNC The TNC, Threaded Neill Concelman, was designed as a 7/16- 28 threaded version of the 50 ohm BNC connector in the late 1950’s to ensure that the connectors not de-couple during intense vibration. TNC’s are weatherproofed with an internal gasket and operate from DC to 11 GHz. Internally they are identical to BNC connectors and meet MIL-39012 and MIL- STD-348. The standard TNC male has a rotating shell with gasket, slotted ground ring with dielectric material extending to its edge and a large air gap between this dielectric ring and the center pin. The TNC female has external threads and a slotted socket contact surrounded by a cylinder of dielectric material. When mated, the central dielectric of the female connector fits into the cavity of the dielectric ring in the TNC male and the tapered inner wall of the TNC female make contact with the spring fingers of the slotted ground ring of the TNC male. Reverse TNC The reverse polarity version of the TNC connector swaps the dielectric and contact configuration of the male with the female. The ground ring and body of the male is not affected. All other performance characteristics remain the same. Reverse Thread WIFI INTERFACE IDENTIFIER — Continued TNC Threads are reversed, or left-handed, in this version of TNC connector. There is no other variation from the standard connector. DMX This standard polarity connector is similar in size to an SMA with modified M8XP .75 metric threads. Built for WaveRider ® and 802.11a/b bandwidth applications. REFERENCE MC CARD MC CARD CONNECTORS are designed for wireless and telecom devices operating at frequencies up to 8 GHz where board and chassis space is limited. 7610 Miramar Road, San Diego, CA 92126 • (858) 549-6340 • (800) 233-1728 fax: (858) 549-6345 • email: rfi@rfindustries.com • web: www.rfindustries.com Revised 7-27-2013 186
Useful Information For more information visit RF Connectors website - Technical Information SEMI-RIGID CABLE SOLDERING TIPS • Always avoid excessive heat when soldering. • Use an active flux such as Kester #2331 when soldering semi-rigid cable to nickel-plated connector bodies. • Fixture cable and solder ferrule or cable and connector body firmly when soldering to the jacket of semi-rigid cable. • Work rapidly during soldering operations and cool the new joints by brushing with alcohol. • Carefully follow the semi-rigid cable manufacturer’s instructions for cable thermal cycling procedures. CONNECTOR MATING TIPS • Before joining connectors, inspect mating surfaces for dirt, dust, debris and bent or broken contacts. • When mating connectors, always turn the coupling nut rather than the body. • In general, the tighter you make the coupling mechanism, the better the performance. However, many connectors are destroyed by over-torquing the coupling nut. Paired connectors tend to be inductive due to gaps of various types. • Use a torque wrench for mating threaded adapters or cable assembly terminations when the reciprocal connector is mounted to equipment. Over torquing of plugs can damage the instrument mounted jack and the adapter or cable connector. This will also void most equipment warranties. STANDARD/METRIC CONVERSIONS LENGTH Inch x 25.40 = Millimeters Millimeters x 0.03937 = Inches Feet x 0.3048 = Meters Miles x 1.609 = Kilometers MASS Ounce x 28.35 = Gram Gram x 0.03527 = Ounce Pound x 0.4536 = Kilogram Kilogram x 2.205 = Pound Kilogram/lm x 0.6214 = Pounds/kft Pounds/kft x 1.4881 = Kilogram/km AREA Sq. Inch x 6.452 = Sq. Centimeter Sq. Centimeter x 0.1550 = Sq. Inch Sq. Foot x 0.0929 = Sq. Meter Sq. Meter x 10.76 = Sq. Foot Sq. Miles x 2.590 = Sq. Kilometer Sq. Kilometer x 0.3861 = Sq. Miles Circular Mil x 0.7854 = Sq. Mil VOLUME Cu. Inch x 16.39 = Cu. Centimeter Cu. Cm. x 0.06102 = Cu. Inch Cu. Foot x 0.02832 = Cu. Meter Cu. Meter x 35.31 = Cu. Foot REFERENCE 7610 Miramar Road, San Diego, CA 92126 • (858) 549-6340 • (800) 233-1728 fax: (858) 549-6345 • email: rfi@rfindustries.com • web: www.rfindustries.com Revised 7-27-2013 187
Page 1 and 2:
Division of RF Industries Coax Conn
Page 3 and 4:
Custom Coaxial Products From Concep
Page 5 and 6:
* * * CONNECTORS & IN-SERIES ADAPTE
Page 7 and 8:
Connectors and In-Series Adapters C
Page 9 and 10:
2.9 mm PLUG JACK 2.9mm SPECIFICATIO
Page 11 and 12:
7-16 DIN MALE FEMALE 7-16 DIN SPECI
Page 13 and 14:
Find Reverse Polarity BNC — 50 OH
Page 15 and 16:
BNC — 50 OHM FIG. 13 RFB-1110-1,
Page 17 and 18:
BNC — 50 OHM FIG. 40 RFB-1115-21
Page 19 and 20:
BNC — 50 OHM FIG. 60 RFB-1131 FIG
Page 21 and 22:
BNC - 75 Ohm BNC — 75 OHM BNC -75
Page 23 and 24:
BNC — 75 OHM FIG. 22 RFB-1730-3,
Page 25 and 26:
FME FME MALE FEMALE SPECIFICATIONS
Page 27 and 28:
Find Reverse Polarity MMCX MMCX PLU
Page 29 and 30:
N N Find Reverse Polarity N MALE FE
Page 31 and 32:
N N N FIG. 13 RFN-1006-8X FIG. 14 R
Page 33 and 34:
N N FIG. 38 RFN-1021-14, 14-WB FIG.
Page 35 and 36:
N N FIG. 59 RFN-1028-I2, -PL, -SI,
Page 37 and 38:
RCA SPECIFICATIONS CABLE GROUPS RCA
Page 39 and 40:
SMA SMA FIG. 5 RSA-3000-7, -X FIG.
Page 41 and 42:
SMA SMA FIG. 25 RSA-3261 FIG. 26 RS
Page 43 and 44:
Find Reverse Polarity SMB 50 OHM SM
Page 45 and 46:
SMZ 75 Ohm (TYPE 43) SMZ -75 Ohm PL
Page 47 and 48:
SSMB SSMB PLUG JACK SSMB SPECIFICAT
Page 49 and 50:
TNC — 50 OHM TNC - 50 Ohm FIG. 5
Page 51 and 52:
TNC — 50 OHM TNC - 50 Ohm FIG. 21
Page 53 and 54:
UHF UHF UHF MALE FEMALE SPECIFICATI
Page 55 and 56:
UHF UHF FIG. 11 RFU-527, -T, TC1 FI
Page 57 and 58:
MINI-UHF MINI-UHF FIG. 8 RFU-600-6,
Page 59 and 60:
WIFI AND BROADBAND (FCC Part 15 Uni
Page 61 and 62:
WIFI WIFI WIFI AND BROADBAND (FCC P
Page 63 and 64:
WIFI AND BROADBAND (FCC Part 15 Uni
Page 65 and 66:
Adapters Adapters with Part-Number
Page 67 and 68:
Note: Chart does not run straight a
Page 69 and 70:
3.5mm ADAPTERS PLATING SPECIFICATIO
Page 71 and 72:
Find Reverse Polarity and Reverse T
Page 73 and 74:
BNC ADAPTERS FIG. 29 RFN-1023-5 FIG
Page 75 and 76:
F ADAPTERS PLATING SPECIFICATIONS B
Page 77 and 78:
Find Reverse Polarity N ADAPTERS PL
Page 79 and 80:
N N N ADAPTERS FIG. 25 RFT-1239 FIG
Page 81 and 82:
SMA SMA Find Reverse Polarity and R
Page 83 and 84:
SMA ADAPTERS FIG.29 RSA-3457 FIG. 3
Page 85 and 86:
TNC ADAPTERS FIG. 17 RFT-1236 FIG.
Page 87 and 88:
UHF ADAPTERS UHF FIG. 13 RFU-536 FI
Page 89 and 90:
MINI-UHF ADAPTERS FIG. 13 RFU-627 F
Page 91 and 92:
WIFI AND BROADBAND ADAPTERS (FCC PA
Page 93 and 94:
UNIDAPT ADAPTERS FIG. 11 PT-4000-01
Page 95 and 96:
ATTENUATORS Dummy Load / Attenuator
Page 97 and 98:
TOOLS & Acc. Preparation and Instal
Page 99 and 100:
N Connector Installation Kits KIT O
Page 101 and 102:
Commercial Grade Coax Crimper & Kit
Page 103 and 104:
Commercial Grade Coax Crimp Die Set
Page 105 and 106:
Strippers — continued We've got t
Page 107 and 108:
Strippers — continued "Porta-Stri
Page 109 and 110:
Pliers Kit Stainless Steel Pliers K
Page 111 and 112:
Solderless Terminal Dies Boxed Sets
Page 113 and 114:
Modular Handtools For Modular Insta
Page 115 and 116:
Test and Measurement Kits Unidapt
Page 117 and 118:
Classic Unidapt TM Kit — 30 piece
Page 119 and 120:
Expanded Classic Unidapt TM Kit —
Page 121 and 122:
Unidapt TM Expansion Kits KITS: Uni
Page 123 and 124:
Unidapt TM Mega Kits KITS: Unidapt
Page 125 and 126:
Unidapt TM Cable Testing Kits KITS:
Page 127 and 128:
Unicables TM KITS: Unidapt TM Unive
Page 129 and 130:
Comprehensive List of Unidapt TM Ad
Page 131 and 132:
7-16 DIN Adapter Kit & 3.5mm Adapte
Page 133 and 134:
Cable Testing Kit Bookshelf Adapter
Page 135 and 136: Ala Carte Cable Assembly Kits and A
Page 137 and 138: Contents of Cellular Radio Adapter
Page 139 and 140: Mobile Radio Coaxial Adapter Kit Bo
Page 141 and 142: RFA-4009 Bookshelf Adapter Kits ONE
Page 143 and 144: Classic Unidapt TM Kits Why Unidapt
Page 145 and 146: REFERENCE Reference Cable Groups Mo
Page 147 and 148: CABLE GROUPS — Continued Please n
Page 159 and 160: Mounting Configurations MOUNTING CO
Page 161 and 162: ASSEMBLY & MOUNTING GUIDE See mount
Page 163 and 164: ASSEMBLY & MOUNTING GUIDE — conti
Page 177 and 178: Crimp vs Solder CRIMP vs SOLDER: PR
Page 179 and 180: Crimp-on This fabrication method ha
Page 181 and 182: REFERENCE • Jacket, braid and die
Page 183 and 184: WIFI INTERFACE IDENTIFIER — Conti
Page 185: REFERENCE SMA WIFI INTERFACE IDENTI
Page 189 and 190: 7610 Miramar Road, San Diego, CA 92
Page 191 and 192: INDEX — continuedi RFB-1142-4 RFB
Page 193 and 194: INDEX — continuedi RFT-1239 RFU-5
Page 195 and 196: INDEX — continuedi RSA-3250 RSA-3
Page 197 and 198: CONNECTING THE WORLD RF Industries
show all

RF Connectors Complete Catalog Download

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?