Arc & Gas Welding & Cutting Equipment - Murex
Arc & Gas Welding & Cutting Equipment - Murex Arc & Gas Welding & Cutting Equipment - Murex
R Saffire MK4 Gas Economiser This device provides economy in the use of gas in welding operations up to nozzle size 25. During non-welding periods the blowpipe can be hung safely on the hooked lever which operates the gas shut-off valves in the economiser. Saffire CO 2 Heater Specifically designed for use with Carbon Dioxide this unit allows flows of up to 40cfh without the risk of freezing or noticeable changes in the flow or pressure. They are available in 230V, 150 Watt versions. Flowmeter The vantage flowmeters are damage resistant tough poly carbonate with solid brass body and fittings. Two models are available, which are designed for use with the MIG or TIG process. • Calibrated flow at 0 – 15 or 40 litres/minute Model Description Part No. Saffire Economiser MK4 Gas economy device 0701282575 Flowmeter Argon/CO 2 14 L/m Dry bobbin type, 0-14 L/m 0701300021 Flowmeter Argon/CO 2 30 L/m Dry bobbin type, 0-30 L/m 0701300022 CO2 Heater 230V 200W Cylinder mounted vaporiser for CO 2 0701020010 Shielding Gas Regulators Rated Flow Model Gas Lit/Min ft3/h Applications Part No. Arc-40L Argon and Argon Mixtures 40 80 MIG Welding with argon rich mixture 0701281229 Arc-35L Argon and Argon Mixtures 35 70 MIG Welding 0701282684 CO2-35L CO 2 35 70 MAG Welding 0701282688 Ar-2 TIG Argon Preset at 2 bar pressure TIG Welding with flowmeter 0701282689 39
R Saffire Heavy Duty & Pipeline Regulators For extra high performance, this range of regulators is process designed and engineered to a high standard of excellence. Incorporating 230 bar safety with sophistication, the instrument can meet better service demands. M600 GP Regulator This unique regulator is in widespread use throughout the industry. It has a proven performance in applications where stable high pressures and flows are required. Many of these are of a critical nature such as diving, cable pressurisation, power generation and a wide variety of laboratory applications in universities, nuclear and the chemical industry. Full 230 bar capability. OUTLET PRESSURE lb/in 2 600 400 200 bar 41.5 27.5 14.0 INLET PRESSURE 69 to 172 bar 1000 to2500 lb/in 2 MAX INLET PRESSURE 230 bar/3335 lb/in 2 FLOW CHARACTERISTICS - M600 OG • Working pressure of 0.40 bar/600psi • Flow rate of 3200l/m (6800ft 3 /h) • Inlet pressure 69 to 172 bar • Maz inlet pressure 230 bar/3335 lb/in 2 590 1180 1770 2360 2950 L/MIN 1250 2500 3750 5000 6250 ft 3 /hr FLOW (AIR) High Flow OR 14 High flow-oxygen single stage with two gauges. For cylinder or pipeline. Working pressure 0 to 14 bar (0 to 200lbf/in 2 ). lb/in 2 200 bar 14.0 A-INLET 124 bar/1800 lb/in 2 B-INLET 14 bar/200 lb/in 2 MAX INLET PRESSURE 230 bar/3335 lbf/in 2 FLOW CHARACTERISTICS - OR 14 • Heavy duty cutting • Thermic lancing • Steel scarfing • Maximum flow – cylinder 4000l/m (8500 ft 3 /h) • Maximum flow – pipeline 2595l/m (5500 ft 3 /h) • Supplied with adaptor OUTLET PRESSURE 150 100 75 50 30 10.5 7.0 5.0 3.5 2.0 B A B B B B B A A A A A 0 427 944 1416 1888 2360 2832 3303 3775 4248 L/MIN 1000 2000 3000 4000 5000 6000 7000 8000 9000 ft 3 /hr FLOW (AIR) High Flow S150-OL2 A high flow-oxygen regulator designed for heavy duty machine cutting, lancing and scarfing. The two gauge regulator has a working pressure of up to 10 bar. • Super high flow • Maximum flow 8495l/m (18,000 ft 3 /h) • Pipeline applications • Inlet pressure 17bar/250 16/in 2 • Max inlet pressure 24 bar/350 16/in 2 OUTLET PRESSURE lb/in 2 150 100 50 25 INLET PRESSURE 17 bar/250 lb/in 2 MAX INLET PRESSURE 24 bar/350 lb/in 2 FLOW CHARACTERISTICS - S 150 OL2 bar 10.5 7.0 3.5 1.7 0 944 2000 1888 4000 2832 6000 3775 4719 5663 6607 7551 8495 9438 L/MIN 8000 10,000 12,000 14,000 16,000 18,000 20,000 ft 3 /hr FLOW (AIR) High Pressure Single S-Type For very high pressure service these regulators permit active gas control of up to 2500 psi (170 bar). Safe and utterly reliable, the high pressure S Series have been uprated to allow full 230 bar capability. 40
- Page 1: Arc & Gas Welding & Cutting Equipme
- Page 5 and 6: R Saffire 300 Series 2+ Multi-Stage
- Page 7 and 8: R Saffire 300 Series 1ec Single-Sta
- Page 9: R Shielding Gases The range provide
- Page 13 and 14: ® ® ® R Saffire Welding and Cutt
- Page 15 and 16: ® ® R Saffire Welding and Cutting
- Page 17 and 18: R Saffire Welding, Cutting and Proc
- Page 19 and 20: R Safety Devices Saffire 36ec Flash
- Page 21 and 22: R Saffire Hose and Fittings Saffire
- Page 23 and 24: R Saffire Welding, Cutting and Heat
- Page 25 and 26: R Certificate of Conformity and Ori
- Page 27: 56 NOTES
R<br />
Saffire MK4 <strong>Gas</strong> Economiser<br />
This device provides economy in the use of gas in welding operations up to<br />
nozzle size 25. During non-welding periods the blowpipe can be hung safely<br />
on the hooked lever which operates the gas shut-off valves in the economiser.<br />
Saffire CO 2 Heater<br />
Specifically designed for use with Carbon Dioxide this unit allows flows of<br />
up to 40cfh without the risk of freezing or noticeable changes in the flow or<br />
pressure. They are available in 230V, 150 Watt versions.<br />
Flowmeter<br />
The vantage flowmeters are damage resistant tough poly carbonate with solid<br />
brass body and fittings. Two models are available, which are designed for use<br />
with the MIG or TIG process.<br />
• Calibrated flow at 0 – 15 or 40 litres/minute<br />
Model Description Part No.<br />
Saffire Economiser MK4 <strong>Gas</strong> economy device 0701282575<br />
Flowmeter Argon/CO 2 14 L/m Dry bobbin type, 0-14 L/m 0701300021<br />
Flowmeter Argon/CO 2 30 L/m Dry bobbin type, 0-30 L/m 0701300022<br />
CO2 Heater 230V 200W Cylinder mounted vaporiser for CO 2 0701020010<br />
Shielding <strong>Gas</strong> Regulators<br />
Rated Flow<br />
Model <strong>Gas</strong> Lit/Min ft3/h Applications Part No.<br />
<strong>Arc</strong>-40L Argon and Argon Mixtures 40 80 MIG <strong>Welding</strong> with argon rich mixture 0701281229<br />
<strong>Arc</strong>-35L Argon and Argon Mixtures 35 70 MIG <strong>Welding</strong> 0701282684<br />
CO2-35L CO 2 35 70 MAG <strong>Welding</strong> 0701282688<br />
Ar-2 TIG Argon Preset at 2 bar pressure TIG <strong>Welding</strong> with flowmeter 0701282689<br />
39
Change language