Bluetooth Commands - wless.ru

More documents

Recommendations

Info

Chapter 2 – AT Commands PIO Logic Commands SSW,4 Set PIO Logic This command sets the PIO logic register state. When set to 0, the PIOs (2,5,6 & 7) will be active high. When set to 1, the PIOs will normally be high and then go low when a connection occurs. Format: ATSSW,4, Parameters: PIO Logic: 0 = (0 = No Connection, +3.3v = Connection) 1 = (+3.3v = No Connection, 0 = Connection) Factory Default: 0 EXAMPLE: TYPE: ATSSW,4,1 REPLY: OK OR ERROR Read Using: ATRSW,4 Note: Requires a reset for change to take affect. RSW,4 Read PIO Logic This command sets the PIO logic register state. Format: ATRSW,4 Return Parameters: EXAMPLE: TYPE: ATRSW,4 REPLY: OK 00 Set Using: ATSSW,4 Transmitting on Specific Channel Only Command SWC Select Transmission Channel This command allows the user to select a single channel to transmit on in multi-point mode. The device can still receive data from any of the other three channels. Format: ATSWC,, Parameters: Select: 0 = Deselect the channel as the current transmission channel 1 = Select the channel as the current transmission channel Channel: 0-3 EXAMPLE: TYPE: ATSWC,1,0 REPLY: OK OR ERROR Read Using: ATSI,21 Note: If the selected channel is disconnected the radio will default to transmitting on all channels. Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360G) 48
Chapter 2 – AT Commands Making the Device Discoverable & Undiscoverable Commands SDIS Set Discoverable This command makes the device discoverable and connectable. Format: ATSDIS EXAMPLE: TYPE: ATSDIS REPLY: OK UDIS Set Undiscoverable This command makes the radio undiscoverable and unconnectable. Format: ATUDIS EXAMPLE: TYPE: ATSDIS REPLY: OK Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360G) 49
Page 1 and 2: Bluetooth ® Commands AT Commands a
Page 3 and 4: Table of Contents Table of Contents
Page 5 and 6: Table of Contents RSSI and Link Qua
Page 7 and 8: Chapter 1 - Introduction Overview C
Page 9 and 10: Chapter 1 - Introduction Important
Page 11 and 12: Chapter 1 - Introduction Multipoint
Page 13 and 14: Chapter 1 - Introduction Test Scena
Page 15 and 16: Chapter 2 - AT Commands Chapter 2 -
Page 17 and 18: Chapter 2 - AT Commands Set/Get Dev
Page 19 and 20: Chapter 2 - AT Commands 11 GET PIO(
Page 21 and 22: Chapter 2 - AT Commands Security Co
Page 23 and 24: Chapter 2 - AT Commands SSNC Set Se
Page 25 and 26: Chapter 2 - AT Commands OP Overwrit
Page 27 and 28: Chapter 2 - AT Commands SW21 Write
Page 29 and 30: Chapter 2 - AT Commands SW23 Write
Page 31 and 32: Chapter 2 - AT Commands SW26 Lock U
Page 33 and 34: Chapter 2 - AT Commands Read Memory
Page 35 and 36: Chapter 2 - AT Commands Notes: •
Page 37 and 38: Chapter 2 - AT Commands Set Master
Page 39 and 40: Chapter 2 - AT Commands About Comma
Page 41 and 42: Chapter 2 - AT Commands Pairing Com
Page 43 and 44: Chapter 2 - AT Commands SSNIFF Enab
Page 45 and 46: Chapter 2 - AT Commands Notes: •
Page 47: Chapter 2 - AT Commands Link Superv
Page 51 and 52: Chapter 2 - AT Commands • If the
Page 53 and 54: Chapter 2 - AT Commands FTP Push/Pu
Page 55 and 56: Chapter 2 - AT Commands OPP Client
Page 57 and 58: Chapter 2 - AT Commands OPPPUSH Obj
Page 59 and 60: Chapter 2 - AT Commands OPP Server
Page 61 and 62: Chapter 4 - Examples Chapter 4 - Ex
Page 63 and 64: Chapter 4 - Examples DUN Point-to-P
Page 65 and 66: Chapter 4 - Examples - Perform a Ma
Page 67 and 68: Chapter 4 - Examples - At second ma
Page 69 and 70: Chapter 4 - Examples Issue these AT
Page 71 and 72: Appendix A - AT Command Summary Tab
Page 73 and 74: Appendix A - AT Command Summary Tab
Page 75 and 76: Appendix B - Responses AT Example L
Page 77 and 78: AT Example Long Response Example Sh
Page 79 and 80: Appendix B - Responses AT Example L
Page 81 and 82: Appendix C - UUID Table Appendix C
Page 83 and 84: Appendix E - Two Versions of Blueto
Page 85 and 86: Appendix E - Two Versions of Blueto
Page 87 and 88: Appendix F - Glossary, Acronyms, an
Page 89 and 90: IL - Last Inquiry..................

Bluetooth Commands - wless.ru

Create successful ePaper yourself

Delete template?

Save as template?