Bluetooth Commands - wless.ru

More documents

Recommendations

Info

Chapter 2 – AT Commands Audio (SCO) PCM Interface Commands On Voice Version Only DSCO Dial SCO This command tells the device to dial and connect the audio channel. Format: ATDSCO EXAMPLE: TYPE: ATDSCO REPLY: OK SCO CONNECT OR OK SCO FAILED OR NO CARRIER DHSCO Dial Hang Up SCO This command tells the device to disconnect the audio channel. Format: ATDHSCO EXAMPLE: TYPE: ATDHSCO REPLY: OK SCO DISCONNECT OR NO CARRIER Max Power Command SPF Set Max TX Power Level Format: ATSPF,, Parameters: • Power Level: Integer from 0 to 10 • Sign: + or – Combined value of level and sign must be in the range of -5 to +10. Typical Bluetooth Industry Values Depending On Device Class Type: Class 1 = 0dBm to +10dBm Class 1 Power Table Values: -5 dBm 0 dBm 5 dBm 0 dBm Factory Default: 10dBm for Class 1. EXAMPLE: TYPE: ATSPF,5,+ // +5dBm REPLY: OK OR ERROR Read Using: ATSI,14 Note: The default value does not include gains associated with the external antenna (2 dBm). The firmware uses the highest value in the power table that is less than or equal to the requested max transmit power number above. Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360G) 46
Chapter 2 – AT Commands Link Supervisory Timeout Command LSTO Link Supervisory Timeout The command tells the device to drop the connection if the units cannot handshake for x amount of time in seconds. Format: ATLSTO, Parameters: Time: Integer value from 2 to 41 Factory Default: 4 seconds Example: Type: ATLSTO,20 // Sets timeout to approx. 20 seconds Reply: OK or ERROR Read Using; ATSI,18 Note: If timeout is set to a duration that is too short, you may inadvertently drop the connection prematurely if the RF link margin is poor. Variable Storage Commands STORE Store Variable This command allows user to permanently store data – ID’s, addresses, etc. Format: ATSTORE,, Parameters: Index: 0 = Location 0 1 = Location 1 String: 16 alphanumeric characters MAX EXAMPLE: TYPE: ATSTORE,0,1234567890123456 REPLY: OK OR ERROR READ Read Variable This command allows user to read a stored variable. Format: ATREAD, Parameters: Index: 0 = Location 0 1 = Location 1 Return Parameters: EXAMPLE: TYPE: ATREAD,0 REPLY: OK 1234567890123456 Note: Nothing stored will return blank Multi-Tech Systems, Inc. SocketWireless Bluetooth AT Commands (S000360G) 47
Page 1 and 2: Bluetooth ® Commands AT Commands a
Page 3 and 4: Table of Contents Table of Contents
Page 5 and 6: Table of Contents RSSI and Link Qua
Page 7 and 8: Chapter 1 - Introduction Overview C
Page 9 and 10: Chapter 1 - Introduction Important
Page 11 and 12: Chapter 1 - Introduction Multipoint
Page 13 and 14: Chapter 1 - Introduction Test Scena
Page 15 and 16: Chapter 2 - AT Commands Chapter 2 -
Page 17 and 18: Chapter 2 - AT Commands Set/Get Dev
Page 19 and 20: Chapter 2 - AT Commands 11 GET PIO(
Page 21 and 22: Chapter 2 - AT Commands Security Co
Page 23 and 24: Chapter 2 - AT Commands SSNC Set Se
Page 25 and 26: Chapter 2 - AT Commands OP Overwrit
Page 27 and 28: Chapter 2 - AT Commands SW21 Write
Page 29 and 30: Chapter 2 - AT Commands SW23 Write
Page 31 and 32: Chapter 2 - AT Commands SW26 Lock U
Page 33 and 34: Chapter 2 - AT Commands Read Memory
Page 35 and 36: Chapter 2 - AT Commands Notes: •
Page 37 and 38: Chapter 2 - AT Commands Set Master
Page 39 and 40: Chapter 2 - AT Commands About Comma
Page 41 and 42: Chapter 2 - AT Commands Pairing Com
Page 43 and 44: Chapter 2 - AT Commands SSNIFF Enab
Page 45: Chapter 2 - AT Commands Notes: •
Page 49 and 50: Chapter 2 - AT Commands Making the
Page 51 and 52: Chapter 2 - AT Commands • If the
Page 53 and 54: Chapter 2 - AT Commands FTP Push/Pu
Page 55 and 56: Chapter 2 - AT Commands OPP Client
Page 57 and 58: Chapter 2 - AT Commands OPPPUSH Obj
Page 59 and 60: Chapter 2 - AT Commands OPP Server
Page 61 and 62: Chapter 4 - Examples Chapter 4 - Ex
Page 63 and 64: Chapter 4 - Examples DUN Point-to-P
Page 65 and 66: Chapter 4 - Examples - Perform a Ma
Page 67 and 68: Chapter 4 - Examples - At second ma
Page 69 and 70: Chapter 4 - Examples Issue these AT
Page 71 and 72: Appendix A - AT Command Summary Tab
Page 73 and 74: Appendix A - AT Command Summary Tab
Page 75 and 76: Appendix B - Responses AT Example L
Page 77 and 78: AT Example Long Response Example Sh
Page 79 and 80: Appendix B - Responses AT Example L
Page 81 and 82: Appendix C - UUID Table Appendix C
Page 83 and 84: Appendix E - Two Versions of Blueto
Page 85 and 86: Appendix E - Two Versions of Blueto
Page 87 and 88: Appendix F - Glossary, Acronyms, an
Page 89 and 90: IL - Last Inquiry..................

Bluetooth Commands - wless.ru

Create successful ePaper yourself

Delete template?

Save as template?