Clinch Fastening Systems

Rivtex® Fastening Systems
Clinch Bolts: Type TCB
D t
Rivtex Studs Dimensional & Performance Data – Metric Sizes (all dimensions shown in millimeters)
Thread
Size
D
(-0.27)
Dt
(± 0.15)
Dr
(-0.2)
R
(+0.2, -0.1)
C
(±0.13)
M5 x 0.8 9 8.3 5.35 0.9 1.8
M6 x 1.0 12 11.0 6.35 1.0 2.1
M8 x 1.25 16 14.5 8.50 1.2 2.8
M10 x 1.5 20 18.0 10.50 1.3 3.5
Material
Thickness
0.75
Recommended
Hole Size
Staking
Force
kN
45
Approx.
Pushout
kN
Approx. Unsupported
Torsional Resistance
Nm
1.5 5.35 (+0.1) 55 *Application testing is required.
2.0 65
0.75
45 1.1 10.0
1.5 6.35 (+0.1) 55 1.7 15.0
2.0 65 2.1 15.0
0.8
65 1.3 13.0
1.5 8.50 (+0.15) 85 2.1 30.0
2.0 100 2.6 35.0
1.0
95
1.5 10.5 (+0.15) 95 *Application testing is required.
2.5 120
Sizes M5 and M10 require application testing to determine specific performance data.
Underhead shape and dimensions controlled by manufacturer to meet performance requirements.
Performance data shown above are typical results obtained under laboratory conditions. It is recommended that each application be tested
individually for precise values. For performance in materials other than steel, individual testing is a requirement. This data is not to be
considered a specification.
Contact an Acument Global Technologies applications engineer for assistance.
9