EAST CENTRAL RAILWAY - Indian Railways

Page -20 of 40
8) ELIGIBILITY : The Tenderer(s) should furnish detailed information as indicated in the five nos. of
declaration forms/certificates placed at Annexure (I to V) of Chapter ___ of the Tender Document and furnish
relevant supportive documents wherever required. Only the tenderers having the following minimum
facilities/capabilities (both financial and technical)/ equipment, personnel and credentials for past performance
in the execution of similar nature of work will be considered for award of this work.
a)
1. Revenue/ Banker’s solvency 40% of Advertised Tender Value of work.
certificate.
2. Should have completed in the
last three financial years (i.e.
current year and three previous
financial years).
3. Total contract amount received
during the last three(03) financial
years and in the current financial
year.
At least one similar work, for a minimum value of 35% of
Advertised Tender value of work.
Should be minimum of 150% of Advertised Tender value.
Tender committee would satisfy themselves about the
authenticity of the certificates produced by the tenderer(s) to
this effect which may be an attested certificate from the
employer/client, audited balance sheet duly certified by the
Chartered Accountant etc. The details about the certificate be
accepted in regard to the turnover.
(A) List of work completed in the last three financial years giving description of work, organisation for whom
executed, approximate value of contract, at the time of award and date of scheduled completion of work.
Date of actual start, actual completion and final value of contract should also be given.
(B) List of work on band indicating description of work, contract value, approximate value of balance work
yet to be done, date of award of work and payment received till date from the same contract.
NOTE : (1) For (A) and (B) above related documents/certificates from the organizations with whom they
worked /are working should be enclosed.
(2) Certificate from Private individuals for whom such work are executed/being executed shall not be accepted.
b) Availability of covered workshop of adequate area with machinery listed below, and facilities for
fabrication and testing facilities to execute this nature of work. The testing shall be as prescribed
in the respective IRS specifications.
(i) Profile Gas cutting machine.
(ii) Drilling machine.
(iii) Punching machine.
(iv) Shaping machine.
(v) Welding generator & equipment for Arc welding of adequate capacity.
(vi) Planing machine.
(vii) Air compressor and riveting equipment.
(viii) Jigs and fixtures for fabrication of channel sleepers.
(ix) Facility of testing of welding work by dye penetration test /
ultrasonic testing.
(x) Master tape of approve quality duly certified for accuracy by National Lab
c) Availability of qualified technical supervisors for fabrication, welding etc. and certified welders
.N.B.:- Tenderers may note that their offer demanding assistance for the procurement of raw materials
and other fittings will not be entertained and such offer will not be considered.
SIGNATURE OF TENDERER(S)/CONTRACTOR(S)