EAST CENTRAL RAILWAY - Indian Railways
EAST CENTRAL RAILWAY - Indian Railways EAST CENTRAL RAILWAY - Indian Railways
Page -12 of 40 Sl. No. Description of work Aprox . Qty. Unit Rate in figure Rate in words (a) ISMC 150x75x2505mm long 34Nos Each (b) ISMC 175x75x2505 mm long 34 Nos. (c ) ISMC 200x75 x2495mm long 20 Nos. (d) ISMC 200x75 x2475mm long 20 Nos. 2. 1.00 Manufacturing, transportation, supply & MT fixing of galvanized MS Grooved /pad/ packing plates including welding the same with sleepers if required, as per approved drawings, minimum thickness of which shall vary to keep the rail level same throughout the bridge or otherwise as per approved drawing. It should be fixed and/or welded with channel sleepers and pasted with elastomeric rubber pad, wherever instructed with approved and specified epoxy after proper cleaning as per approved drawing. 3. Supplying, fitting and fixing of 6mm thick 620mm wide Chequred MS Plate on gang way of girder bridges with covered manholes on both ends of each girder with all necessary fittings including cutting to size bending, fabrication, welding/ to be riveted with new channel sleepers, complete all with contractor`s materials, labours, lead, lift, transportation, freight, taxes etc complete. 60 Mtr. Each Each Each Per M.T Per Mtr. Sr.DEN(2)/DHN SIGNATURE OF TENDERER(S)/CONTRACTOR(S)
Page -13 of 40 Sl. Description of work No. 4 Fabrication, Supplying , fitting and fixing small fittings for insulation of channel sleepers use in track circuited area as per approved drawing and as per direction of Engineer Iin-charge with all contractor’s labour, tools , materials with all lead ,lift, sales tax etc. all complete (Bridge No. 34A) Aprox. Qty. 68 Nos. Sleepers Unit Rate in figure Per Sleeper Rate in words Sr.DEN(2)/DHN SIGNATURE OF TENDERER(S)/CONTRACTOR(S)
- Page 1 and 2: Page -01 of 40 EAST CENTRAL RAILWAY
- Page 3 and 4: Page -03 of 40 The tender must be s
- Page 5 and 6: ANNEXURE - I TENDER FORM (SECOND SH
- Page 7 and 8: Page -07 of 40 13. Execution of Con
- Page 9 and 10: Page -09 of 40 ELIGIBILITY CRITERIA
- Page 11: Name of the Work : Page -11 of 40 E
- Page 15 and 16: Page -15 of 40 Annexure - A Part-I
- Page 17 and 18: Page -17 of 40 NOTE : THESE ITEMS S
- Page 19 and 20: Page -19of 40 SPECIAL CONDITION OF
- Page 21 and 22: Page -21 of 40 9) The Contract of t
- Page 23 and 24: Page -23 of 40 SPECIAL CONDITIONS O
- Page 25 and 26: Page -25of 40 19) APPOINTING TECHNI
- Page 27 and 28: iii) iv) Page -27 of 40 The adjustm
- Page 29 and 30: Page -29 of 40 iv) The calculations
- Page 31 and 32: Page -31 of 40 t) IS:2623-1986 : Me
- Page 33 and 34: Page -33 of 40 JIGS & MANIPULATORS
- Page 35 and 36: Page -35 of 40 10) Fixing of Steel
- Page 37 and 38: Page -37 of 40 ANNEXURE - II DETAIL
- Page 39 and 40: Page -39 of 40 ANNEXURE - IV TENDER
Page -12 of 40<br />
Sl.<br />
No.<br />
Description of work<br />
Aprox<br />
. Qty.<br />
Unit Rate in<br />
figure<br />
Rate in<br />
words<br />
(a) ISMC 150x75x2505mm long 34Nos Each<br />
(b) ISMC 175x75x2505 mm long 34<br />
Nos.<br />
(c ) ISMC 200x75 x2495mm long 20<br />
Nos.<br />
(d) ISMC 200x75 x2475mm long 20<br />
Nos.<br />
2.<br />
1.00<br />
Manufacturing, transportation, supply & MT<br />
fixing of galvanized MS Grooved /pad/<br />
packing plates including welding the same<br />
with sleepers if required, as per approved<br />
drawings, minimum thickness of which shall<br />
vary to keep the rail level same throughout<br />
the bridge or otherwise as per approved<br />
drawing. It should be fixed and/or welded<br />
with channel sleepers and pasted with<br />
elastomeric rubber pad, wherever instructed<br />
with approved and specified epoxy after<br />
proper cleaning as per approved drawing.<br />
3. Supplying, fitting and fixing of 6mm thick<br />
620mm wide Chequred MS Plate on gang<br />
way of girder bridges with covered manholes<br />
on both ends of each girder with all<br />
necessary fittings including cutting to size<br />
bending, fabrication, welding/ to be riveted<br />
with new channel sleepers, complete all with<br />
contractor`s materials, labours, lead, lift,<br />
transportation, freight, taxes etc complete.<br />
60<br />
Mtr.<br />
Each<br />
Each<br />
Each<br />
Per<br />
M.T<br />
Per<br />
Mtr.<br />
Sr.DEN(2)/DHN<br />
SIGNATURE OF<br />
TENDERER(S)/CONTRACTOR(S)
Change language