Directions for Use - Implox
Directions for Use - Implox
Directions for Use - Implox
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
F<br />
Configuration<br />
Overview<br />
The HeartStart Defibrillator comes with a factory default configuration designed<br />
to meet the needs of most users. This configuration can only be<br />
changed by an authorized person using HeartStart Configure PDA software or<br />
Event Review software. This software is <strong>for</strong> use by trained personnel.<br />
In<strong>for</strong>mation about HeartStart data management products is available online at<br />
http://www.medical.philips.com/goto/eventreview.<br />
Device options<br />
Laerdal Medical<br />
The following table includes the features of HeartStart Defibrillator operation that<br />
are not related to patient treatment.<br />
parameter settings default default description<br />
speaker volume 1, 2, 3, 4,<br />
5, 6, 7, 8<br />
8 The volume of the HeartStart’s speaker is set<br />
to 8, highest.<br />
auto send periodic<br />
self-test (PST) data<br />
On, Off On Enables the periodic self-test data to be<br />
broadcast through the device's infrared data<br />
port.<br />
ECG out data On, Off On Enables the ECG data to be broadcast<br />
through the device's infrared data port.<br />
F<br />
F-1
Change language