CASMED 740 Vital Signs Monitor - Implox
CASMED 740 Vital Signs Monitor - Implox
CASMED 740 Vital Signs Monitor - Implox
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong>s<br />
NOTE:<br />
Both Event and Trend History data are only available for twenty-four (24) hours. Data older than<br />
twenty-four (24) hours is automatically removed from the History lists.<br />
Once the HISTORY pushbutton has been pressed, use the HISTORY pushbutton to toggle<br />
between the two History menus.<br />
When completed, press the CANCEL pushbutton to return to "Ready" or after thirty (30) seconds<br />
of button inactivity the monitor will automatically return to "Ready".<br />
NOTE:<br />
History data values for NIBP and Predictive Temperature are saved as they occur. History data<br />
values for %SpO 2 (one (1) minute averages) and <strong>Monitor</strong> Temperature are saved once a minute.<br />
NOTE:<br />
Turning the power “OFF” does not clear the History memory. Measurements will remain in<br />
memory for up to twenty-four (24) hours. Any measurement older than twenty-four hours is<br />
deleted. It is suggested to manually clear History between patients (See CLEARING HISTORY<br />
on Page 91).<br />
EVENT HISTORY (EVENT-Ev)<br />
To review History based on Event readings, press the HISTORY pushbutton. The most current<br />
measurement (NIBP or Predictive Temperature) and the time of measurement (HH:MM-Ev) are<br />
displayed on the front panel along with their corresponding %SpO2 values. If there are no<br />
readings in the History, the message "No Evnts" is displayed in the Message Window.<br />
Press the ARROW DOWN pushbutton to review preceding measurements. The word "Oldest"<br />
will be displayed briefly on the Message Window when there are no more readings left in the<br />
memory. The oldest measurement will then be redisplayed.<br />
Press the ARROW UP pushbutton to advance the measurements towards the most current<br />
measurement taken. The word "Newest" will be displayed briefly on the Message Window when<br />
there are no more current readings. The most recent measurement will then be redisplayed.<br />
To exit the History Mode and return to "Ready" press the CANCEL pushbutton. If a<br />
measurement is desired immediately while in the History Mode, simply press START. This will<br />
exit the History Mode and begin a measurement.<br />
21-02-0298 REV. 00 12/06<br />
89