CASMED 740 Vital Signs Monitor - Implox

CASMED 740 Monitors
CUFF HOSE CONNECTION
The inflation hose is connected to the monitor where the MAXNIBP logo is located as shown in
Figure 17. The hose must be connected to the cuff prior to use.
NOTE:
An optional six (6) foot inflation hose is available when monitoring in the NEO mode. Refer to
Section 13, ACCESSORIES for part number information.
SpO 2 SENSOR CONNECTION
(if equipped)
Connect the sensor cable in this receptacle for SpO 2 monitoring.
21-02-0298 REV. 00 12/06
81