CASMED 740 Vital Signs Monitor - Implox
CASMED 740 Vital Signs Monitor - Implox
CASMED 740 Vital Signs Monitor - Implox
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong>s<br />
Figure 16: <strong>740</strong>M Rear Panel View<br />
AC / DC CONNECTION<br />
Receptacle for the AC power cord when the <strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong> is purchased with an AC Line<br />
Power option and built–in battery.<br />
When the <strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong> is purchased as an EMS monitor equipped with a Swivel<br />
Mount, the ambulance DC power cord is attached here.<br />
FUSE COMPARTMENT<br />
When the <strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong> is purchased for AC Line power, the power input receptacle<br />
incorporates dual fuses located in the hot and neutral lines.<br />
BATTERY COMPARTMENT<br />
The <strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong> is equipped with a 7.2 Volt, 3700 mAhr battery pack that, when fully<br />
charged, is capable of taking 100 NIBP readings when the monitor is set in the 5-minute<br />
Automatic Mode.<br />
NOTE:<br />
The serial number label is located on the bottom of the monitor.<br />
TEMPERATURE PROBE ELECTRICAL CONNECTION<br />
(if equipped)<br />
Connect the Temperature cable in this receptacle for Temperature monitoring. Leave the probe<br />
connection in place. The Temperature function is OFF until the probe is removed from the<br />
holder. Refer to Section 7, TEMPERATURE MONITORING for more information.<br />
21-02-0298 REV. 00 12/06<br />
79
Change language