CASMED 740 Vital Signs Monitor - Implox

INITIAL SETUP
Before using the monitor for the first time, the following items should be
performed:
• Select the operating Language
• Select the Temperature scale (if installed)
• Set the monitor’s Date and Time
These items are found in the monitor’s Configuration Menu.
To enter the Configuration Menu, press and hold the ALARM LIMITS
and VOLUME push button keys while turning “ON” the unit.
NOTE:
Unit will beep once and software version will be displayed.
Steps must be completed within 60 seconds or process must be restarted.
Language
Press until the menu for language is displayed. Press either or to make your selection.
Temperature Scale (if installed)
Press until the menu for temperature scale is displayed. Press either or to make your
selection.
Date
Press until the date is displayed. The day parameter is flashing. Press either or to change
the Day.
Press one time. Press either or to change the Month.
Press one time. Press either or to change the Year.
Time
Press one time. Press either or to change the Hour.
Press one time. Press either or to change the Minute.
Press
one time to exit and save your changes.
21-02-0298 REV. 00 12/06
5