CASMED 740 Vital Signs Monitor - Implox

CASMED 740 Monitors
OPERATING MODES
Characteristic
Specification
Patient:
NIBP:
History:
%SpO 2:
Temperature:
NIBP function in Neonatal or Adult
Manual, STAT or Automatic (at preset intervals)
Review of previous measurements
Continuous Monitoring
Predictive or Continuous Monitoring
POWER
Characteristic
Specification
Source:
AC Power:
DC Power (EMS Option):
Battery:
Leakage Current:
External line or internal battery
100 - 240 VAC, 50/60 Hz, 0.5A; Fuse Rating – T500mAL250V or T1.25AL250V
(two provided). Refer to rear panel monitor labeling for actual fuse rating.
+12 VDC; 7W; Fuse Rating – Wickman Type TE5, Time Lag, 3.15A, 125VAC or
approved equivalent (one provided)
Nickel Metal Hydride (NiMH) battery pack (user removable)
Charge Time: 4 hours
Operation on battery: 100 NIBP readings when set in the 5-minute Automatic
Mode
100 microamp (maximum)
FEATURES
Characteristic
Self Test:
Auto Zero:
Inflation:
Deflation:
Max Measurement Time:
Specification
System self test is performed each time power is turned on.
Zero pressure reference is automatically established after every reading.
Initial inflation to 150 mmHg (Adult) or 85 mmHg (Neonatal) or user selectable.
(80, 100, 120, 140, 150, 160, 180, 200) - Adult ; (60, 80, 85, 100, 120) - Neonatal.
Subsequent inflation to approximately 30 mmHg greater than previous Systolic
pressure.
Automatic
Limited to 120 seconds (Adult), 90 seconds (Neonate)
21-02-0298 REV. 00 12/06
165