CASMED 740 Vital Signs Monitor - Implox
CASMED 740 Vital Signs Monitor - Implox
CASMED 740 Vital Signs Monitor - Implox
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong>s<br />
DAYLIGHT SAVING TIME OPTION<br />
The <strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong> can be configured to automatically respond to time changes<br />
associated with Daylight Saving Time. The monitor can be configured to one of five Daylight<br />
Saving Time Option settings. They are:<br />
• DST OFF Daylight Saving Time is “OFF”. The user is responsible for changing<br />
the time if needed. This is the default setting for the <strong>CASMED</strong> <strong>740</strong><br />
<strong>Monitor</strong>.<br />
• DST N AM Daylight Saving Time “North America”. Use this setting and the<br />
monitor will automatically add one (1) hour the first Sunday in April at 2<br />
a.m. and subtract (1) hour the last Sunday in October at 2 a.m.<br />
• DST EU 1, 2, 3 Daylight Saving Time “European Union”.<br />
In the European Union, Daylight Saving Time begins and ends at 1 a.m. Universal Time<br />
(Greenwich Mean Time). It starts the last Sunday in March, and ends the last Sunday in<br />
October. In the EU, all time zones change at the same moment.<br />
Select EU 1 if the monitor will be located in Ireland, Portugal or the United Kingdom. Select EU<br />
3 for Finland. EU 2 can be used for all remaining countries within the European Union.<br />
NOTE:<br />
Enabling Daylight Saving Time will affect the History readings, but not erase them.<br />
Should it need to be changed, first enter the Configuration menu. Refer to Page 98, ENTERING<br />
THE CONFIGURATION MENU.<br />
Once in the menu, use one of the NEXT programmed pushbutton keys until the Message<br />
Window displays the monitor’s current setting for Daylight Savings Time.<br />
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the<br />
CANCEL pushbutton to exit to the “Ready” mode.<br />
BATTERY POWER<br />
The <strong>CASMED</strong> <strong>740</strong> <strong>Monitor</strong> is equipped with an internal rechargeable battery. The battery is<br />
charging whenever the monitor is plugged into a power source (AC Line Power or +12 VDC). A<br />
Battery Power Visual Indicator, located on the front panel, indicates the status condition of the<br />
monitor’s battery.<br />
Batteries will self-discharge when they are not used. It is recommended that the battery be<br />
maintained at full charge by leaving the monitor connected to a power source whenever<br />
possible.<br />
The standard 7.2 Volt 3700 mAhr battery pack, when fully charged, is capable of taking 100<br />
NIBP readings when the monitor is set in the 5-minute Automatic Mode.<br />
21-02-0298 REV. 00 12/06<br />
105
Change language