CASMED 740 Vital Signs Monitor - Implox

CASMED 740 Monitors
SETTING THE DATE
The CASMED 740 Monitor’s Date value is set at the factory. Should it need to be changed, first
enter the Configuration menu. Refer to Page 98, ENTERING THE CONFIGURATION MENU.
Once in the menu, use one of the NEXT programmed pushbutton keys until the Message
Window displays the monitor’s date using the following format: “DDMMMYY”. Where DD = Day
of the Month, MMM = Month of the Year (JAN, FEB, etc.) and YY = Last 2 digits of the year
(2002 is displayed as 02). The flashing parameter indicates the parameter that can be changed.
Use the ARROW UP or ARROW DOWN pushbuttons to make your selection. Press one of the
NEXT programmed pushbutton keys to advance to the next parameter to set within the Date
menu.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
SETTING THE TIME
The CASMED 740 Monitor’s Time value is set for Eastern Time and is set at the factory. Should
it need to be changed, first enter the Configuration menu. Refer to Page 98, ENTERING THE
CONFIGURATION MENU.
Once in the menu, use one of the NEXT programmed pushbutton keys until the Message
Window displays the monitor’s time using the following format: “TM HH:MM”. Where HH = Hour
of the Day (0 – 23) and MM = Minute of the Hour (0 – 59). The flashing parameter indicated the
parameter that can be changed.
Use the ARROW UP or ARROW DOWN pushbuttons to make your selection. Press one of the
NEXT programmed pushbutton keys to advance to the next parameter to set within the Time
menu.
NOTE:
Altering the Date and Time will affect the History readings, but not erase them.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
104
21-02-0298 REV. 00 12/06