CASMED 740 Vital Signs Monitor - Implox

CASMED 740 Monitors
SELECTING THE POWER-OFF DELAY TIME
The CASMED 740 Monitor incorporates a user selectable Power-Off Delay time feature.
The amount of time the ON/STANDBY pushbutton is pressed to turn the display “OFF” can be
configured to be either “Off 0S” (no delay) or “Off 2S” (press and hold for 2 seconds). The
default setting used by the monitor is “Off 0S”.
To configure the Power-Off Delay Time, first enter the Configuration menu. Refer to Page 98,
ENTERING THE CONFIGURATION MENU.
Once in the menu, use one of the NEXT programmed pushbutton keys until the Message
Window displays the monitor’s current setting for the Power-Off Delay Time.
Use the ARROW UP or ARROW DOWN pushbuttons to make your selection.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
SELECTING THE TEMPERATURE SCALE
(available if Temperature is installed)
The CASMED 740 Monitor can display Temperature readings in either the Celsius or Fahrenheit
scales.
To select the operating Temperature scale, first enter the Configuration menu. Refer to Page
98, ENTERING THE CONFIGURATION MENU.
Once in the menu, use one of the NEXT programmed pushbutton keys until the Message
Window displays the Temperature setup menu “°F” or “°C”.
Use the ARROW UP or ARROW DOWN pushbuttons to make your selection.
Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use the
CANCEL pushbutton to exit to the “Ready” mode.
AUDIO ALARM SILENCE (SILENCE/RESET Pushbutton)
The CASMED 740 Monitor’s SILENCE/RESET pushbutton can be configured to have the audio
associated with patient alarms set to one of three selections. The selections are:
• 2-Minute Audio Alarm Silence (Default)
• Permanent Audio Alarm Silence
• Alarm Limits Off
To configure the alarms, first enter the Configuration menu. Refer to Page 98, ENTERING THE
CONFIGURATION MENU.
21-02-0298 REV. 00 12/06
101