LanTEKÂ® II Series Manual - Ideal Industries Inc.

More documents

Recommendations

Info

Chapter 8 Fiber testing (LWL) FiberTEK FDX Illustration 5 8.11.2. Details concerning the fiber line 10. Use soft key to start the calculation. The result appears in Loss Budget box. 11. To confirm, press Enter in this box and the next two boxes. NOTE: The type of soft keys indicated depends on the corresponding standard. Concerning fiber standards, refer to Fiber Cabling Standards & Application Requirements . 85
CHAPTER 9 Tone Generator 9.1. Tone Generator The Display handset (DH) as well as the Remote handset (RH) can generate a low tone, a high tone and an alternating tone, with a rate of 2 Hz between low and high alternating tone ("Warble"), which is recognized by most standard cable locators. Illustration 9.1. Typical Application of Tone Generator NOTE: The keys WIREMAP, SHIFT and TONE are hard keys. The keys Pair A, Pair B, Pair C, Pair D, Low, High and Warble are soft keys that are displayed on the Display handset (DH). 9.1.1. Enable Tone Generator with Display handset (DH) 1. Connect Display handset (DH) to cable to be tested. 2. Use Arrow Keys to navigate on ready screen to "Toner" display and confirm with Enter. 86
Page 1 and 2:
LanTEK ® II Series Manual 0
Page 3 and 4:
Standard Warranty Policy of IDEAL I
Page 5 and 6:
Table of contents CHAPTER 1 Your La
Page 7 and 8:
Table of contents 6.11.1. Insertion
Page 9 and 10:
Table of contents 13.1. Technical S
Page 11 and 12:
Chapter 1 Your LanTEK ® II Cable C
Page 13 and 14:
CHAPTER 2 Product Description 2.1.
Page 15 and 16:
Chapter 2 Product Description 2.1.2
Page 17 and 18:
Chapter 2 Product Description 2.2.
Page 19 and 20:
2.3. Power Management Chapter 2 Pro
Page 21 and 22:
CHAPTER 3 Basics of the Cable Test
Page 23 and 24:
Chapter 4 Preferences 1. Use Arrow
Page 25 and 26:
Chapter 4 Preferences 1. Use Arrow
Page 27 and 28:
Chapter 4 Preferences 6. Use soft k
Page 29 and 30:
CHAPTER 5 Autotest Using Autotest,
Page 31 and 32:
Chapter 5 Autotest Autotest Pref Th
Page 33 and 34:
Chapter 5 Autotest 2. Use Arrow Key
Page 35 and 36: Chapter 5 Autotest 5.3.1. Simple Ca
Page 37 and 38: Chapter 5 Autotest 3. Use Alphanume
Page 39 and 40: Chapter 5 Autotest 5.4.1. Cable Nam
Page 41 and 42: Chapter 5 Autotest AAA A / AAA A -
Page 43 and 44: Chapter 5 Autotest Illustration 2 5
Page 45 and 46: Chapter 5 Autotest 20. Make correct
Page 47 and 48: Chapter 5 Autotest 5.6. DualMODE Fu
Page 51 and 52: Chapter 5 Autotest 5.9. Calibration
Page 53 and 54: Chapter 5 Autotest 5.9.2. Coaxial C
Page 55 and 56: Chapter 5 Autotest 3. Use soft key
Page 59 and 60: CHAPTER 6 Structured Cabling Testin
Page 61 and 62: Chapter 6 Structured cabling testin
Page 65 and 66: 6.11. Insertion Loss Test (Attenuat
Page 73 and 74: CHAPTER 8 Fiber Testing with FiberT
Page 75 and 76: Chapter 8 Fiber testing (LWL) Fiber
Page 85: Chapter 8 Fiber testing (LWL) Fiber
Page 89 and 90: CHAPTER 10 IDEAL DataCENTER Softwar
Page 91 and 92: Chapter 10 IDEAL DataCENTER Softwar
Page 105 and 106: Chapter 11 LanTEK Firmware Upgrade
Page 107 and 108: Standards Organization Classificati
Page 109 and 110: Chapter 13 Customer Service North/S
show all

LanTEKÂ® II Series Manual - Ideal Industries Inc.

Create successful ePaper yourself

Delete template?

Save as template?