LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc. LanTEK® II Series Manual - Ideal Industries Inc.
Chapter 8 Fiber testing (LWL) FiberTEK FDX ‣ Only Autotests with the overall evaluation Passed can be automatically saved. Tests with failure rating must be manually saved. ‣ The test results are automatically saved if Autosave Pref is enabled. ‣ A name is automatically assigned to finished tests if Auto Increment function has been enabled. If another name is preferred, use option name. 8.9.3. Manual Saving of Autotest Results (Autosave off) to manually assign another 1. To manually save an Autotest, at the bottom edge of the screen press the soft key . 2. Now a brief acknowledgement appears, indicating the name under which the test will be saved. 3. If the current name already exists a warning message appears, asking whether you want to overwrite the existing file or enter another name. 4. Press Escape to cancel and return to previous display without saving or to overwrite existing file. 8.9.4. Working with Jobs The Autotest is saved under an unique name. The test results can be viewed, printed or deleted on the File screen. 1. On the ready screen, select File option and open job list. 2. Mark the desired job. Use to open the folder containing the option list. 3. Mark the desired function and confirm with Enter. 8.9.5. Display of Result Details The Autotest is saved under an unmistakable name. The test results can be viewed, printed or deleted on the File screen. 1. On the ready screen, select File option and open Job List. 2. Mark the desired job. Press Enter to open the job. 3. Use Arrow Keys to mark the desired test record. 4. Press Enter to open the record. 5. Press Escape to return to previous screen at any time. 8.10. FiberTEK FDX Measuring Mode The LanTEK ® II Cable Tester selects the reference level and test limits based on the test selected. When testing fibers (LWL), the remote handset (RH) must be manually powered on. 1. Use Arrow Keys to navigate on ready screen to "Fiber" display and confirm with Enter. 2. Highlight the wavelength, according to fiber to be measured and confirm with Enter. 79
Chapter 8 Fiber testing (LWL) FiberTEK FDX Illustration 1 8.10. Select Wavelength 3. Use Arrow Keys to navigate on ready screen to "Analyze" display and confirm with Enter. 8.10.1. Continuous Run Illustration 8.10. Analyze This mode is used for troubleshooting. During continuous run, the measurement is repeated until it is manually cancelled. There is no save function. 1. Use Arrow keys to navigate to menu Continuous Run and press Enter. Illustration 8.10.1. Continuous Run The measurement is performed and the result displayed. 2. Use soft key Run to start continuous run of measurement until it is finished by pressing soft key Stop. 80
- Page 29 and 30: CHAPTER 5 Autotest Using Autotest,
- Page 31 and 32: Chapter 5 Autotest Autotest Pref Th
- Page 33 and 34: Chapter 5 Autotest 2. Use Arrow Key
- Page 35 and 36: Chapter 5 Autotest 5.3.1. Simple Ca
- Page 37 and 38: Chapter 5 Autotest 3. Use Alphanume
- Page 39 and 40: Chapter 5 Autotest 5.4.1. Cable Nam
- Page 41 and 42: Chapter 5 Autotest AAA A / AAA A -
- Page 43 and 44: Chapter 5 Autotest Illustration 2 5
- Page 45 and 46: Chapter 5 Autotest 20. Make correct
- Page 47 and 48: Chapter 5 Autotest 5.6. DualMODE Fu
- Page 49 and 50: Chapter 5 Autotest Illustration 2 5
- Page 51 and 52: Chapter 5 Autotest 5.9. Calibration
- Page 53 and 54: Chapter 5 Autotest 5.9.2. Coaxial C
- Page 55 and 56: Chapter 5 Autotest 3. Use soft key
- Page 57 and 58: Chapter 5 Autotest Illustration 4 5
- Page 59 and 60: CHAPTER 6 Structured Cabling Testin
- Page 61 and 62: Chapter 6 Structured cabling testin
- Page 63 and 64: Chapter 6 Structured cabling testin
- Page 65 and 66: 6.11. Insertion Loss Test (Attenuat
- Page 67 and 68: Chapter 6 Structured cabling testin
- Page 69 and 70: Chapter 6 Structured cabling testin
- Page 71 and 72: Chapter 6 Structured cabling testin
- Page 73 and 74: CHAPTER 8 Fiber Testing with FiberT
- Page 75 and 76: Chapter 8 Fiber testing (LWL) Fiber
- Page 77 and 78: Chapter 8 Fiber testing (LWL) Fiber
- Page 79: Chapter 8 Fiber testing (LWL) Fiber
- Page 83 and 84: Chapter 8 Fiber testing (LWL) Fiber
- Page 85 and 86: Chapter 8 Fiber testing (LWL) Fiber
- Page 87 and 88: CHAPTER 9 Tone Generator 9.1. Tone
- Page 89 and 90: CHAPTER 10 IDEAL DataCENTER Softwar
- Page 91 and 92: Chapter 10 IDEAL DataCENTER Softwar
- Page 93 and 94: Chapter 10 IDEAL DataCENTER Softwar
- Page 95 and 96: Chapter 10 IDEAL DataCENTER Softwar
- Page 97 and 98: Chapter 10 IDEAL DataCENTER Softwar
- Page 99 and 100: Chapter 10 IDEAL DataCENTER Softwar
- Page 101 and 102: Chapter 10 IDEAL DataCENTER Softwar
- Page 103 and 104: Chapter 10 IDEAL DataCENTER Softwar
- Page 105 and 106: Chapter 11 LanTEK Firmware Upgrade
- Page 107 and 108: Standards Organization Classificati
- Page 109 and 110: Chapter 13 Customer Service North/S
Chapter 8<br />
Fiber testing (LWL) FiberTEK FDX<br />
Illustration 1 8.10. Select Wavelength<br />
3. Use Arrow Keys to navigate on ready screen to "Analyze" display and confirm<br />
with Enter.<br />
8.10.1. Continuous Run<br />
Illustration 8.10. Analyze<br />
This mode is used for troubleshooting. During continuous run, the measurement is repeated<br />
until it is manually cancelled. There is no save function.<br />
1. Use Arrow keys to navigate to menu Continuous Run and press Enter.<br />
Illustration 8.10.1. Continuous Run<br />
The measurement is performed and the result displayed.<br />
2. Use soft key Run to start continuous run of measurement until it is finished by<br />
pressing soft key Stop.<br />
80