LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 6<br />
Structured cabling testing<br />
Illustration 6.3. Single Tests<br />
5. Confirm selection of test with Enter. After completion of test, a result table opens.<br />
6.4. Evaluation of Analysis Test Results<br />
The overall result of the analysis test is displayed in the upper right on the screen below the<br />
title bar. The results for the individual wire pairs are displayed on the right side of the<br />
respective test.<br />
Overall Result<br />
Individual Results<br />
Illustration 6.4. Evaluation of Analysis Test Results<br />
The above example shows the screen for DC resistance.<br />
‣ The overall result of the test appears in the upper right, beside the date.<br />
‣ The results of the individual wire pairs appear in the last column on the right (result<br />
column).<br />
The results for the overall test and the single tests are indicated similar to Autotest.<br />
6.4.1. Graphs for Analysis Tests<br />
After completion of test series, certain analysis results can be displayed in table or graph<br />
format. The graph display in analysis mode is comparable to the one of Autotest.<br />
6.5. Overview of Single Test Analysis<br />
Analysis mode allows fault repair by performing single tests, making changes and displaying<br />
changed test results. With the analysis test it is possible to check the cable continuously for<br />
damage or overstretching.<br />
59
Change language