LanTEK® II Series Manual - Ideal Industries Inc.

Chapter 5
Autotest
3 The actual measurement curve of the wire pair. In this case, the loss is displayed.
4 The actual measurement curve of the wire pair.
5 Vertical axis with measuring values in dB.
Use arrow keys to move cursor horizontally. When cursor position is changed, the measuring
values displayed on screen are changed as well.
6
7
Use soft keys and to move cursor in larger steps.
Use Arrow Keys to move cursor in smaller steps.
While SHIFT key is pressed, cursor can be moved in large steps with Arrow Keys.
Enlargement or reduction of view of horizontal axis. At maximum size, these keys have no
function.
8 Horizontal axis with frequency values.
9 Specified limit curve for worst case NEXT value.
10
During initial display of wire pair graph, the cursor is automatically at worst case limit and
frequency location.
57