LanTEK® II Series Manual - Ideal Industries Inc.

Chapter 5
Autotest
3. Use soft key to open Test Options.
Test Options
Select all
Select All Passed
Select All Failed
Deselect All
Permanently Delete Selected
Tests
Permanently Delete All
Description
Selects all stored test results.
Selects only passed tests for editing.
Selects only failed tests for editing.
Deselects all stored test results.
Deletes highlighted test results.
Deletes all stored test results.
Test Options
Results Info
Selected Results Info
Rename Test
Description
Displays information on test results, such as number of tests,
number of passed/failed tests. Tested lengths and memory used.
Displays results of selected tests.
Renames selected test results.
5.11.3. Copy Job Folder to USB Removable Storage
1. Insert the USB removable storage into the USB port of Display handset (DH).
2. Navigate in job list with Arrow Keys to job folder to be copied, and highlight it
with soft key
3. Use soft key to open job options.
(it is possible to highlight several job folders).
4. Navigate with Arrow Keys to Copy Selected Jobs to USB Flash Drive and press
Enter.
5.11.4. Alien Crosstalk Measurements (AXT)
Use soft key
in display of job list to open the saved Alien Crosstalk Measurements
and to copy them to a USB removable storage.
5.12. Autotest Results and Graphs
The Autotest results can be displayed as table or graph.
1. Open "File" on start screen.
2. Use Arrow Keys to navigate to the desired job folder. The display is highlighted
yellow.
3. Use Arrow Keys to navigate to desired single test. The display is highlighted
yellow.
4. Press Enter to display overview of single tests.
54