LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 5<br />
Autotest<br />
Illustration 2 5.7. Enter NVP<br />
4. Use Alphanumeric keys to enter one or several NVP.<br />
5. For automatic calculation of a new NVP, press .<br />
Illustration 3 5.7. Calculation of NVP<br />
6. Connect a cable of known length.<br />
7. Use Arrow Keys and Number Keys to enter known cable length.<br />
8. For automatic calculation of a new NVP, press . After calculation of new<br />
NVP, the display returns to the NVP main screen.<br />
NOTE:<br />
This concerns a channel measurement. When entering the cable length, the length of both<br />
patch cords must be considered.<br />
5.8. Coaxial Cable Standards<br />
The LanTEK ® <strong>II</strong> Cable Tester supports the following coaxial cable standards:<br />
CATV standards Ethernet standards Other cable types<br />
RG59 31 or 92 m<br />
(3-fold or 4-fold shield)<br />
RG6 31 or 92 m<br />
(3-fold or 4-fold shield)<br />
10Base 2<br />
10Base 5<br />
IBM Coax<br />
TWINAXIAL<br />
ARCNET<br />
1. Open "Cable Type" on start screen.<br />
48