LanTEKÂ® II Series Manual - Ideal Industries Inc.

More documents

Recommendations

Info

Chapter 5 Autotest Illustration 2 5.5.3. Cable Length 6. Use soft key to start calculation of NVP. 7. Press Enter to save NVP. Use Escape to exit menu without making changes. 5.5.4. Enter Reference Temperature 1. Use soft key to open Select Menu for changing ambient temperature. 2. Use Alphanumeric Keys to assign reference temperature. Illustration 5.5.4. Reference Temperature 3. Press Enter to save the reference temperature. Use Escape to exit menu without making changes. 45
Chapter 5 Autotest 5.6. DualMODE Function for Twisted Pair Cabling The DualMODE function of LanTEK ® <strong>II</strong> Cable tester allows measurement in compliance with 2 limits in one single Autotest. Thus, for instance, simultaneous Channel Link and Permanent Link measurements can be performed. With DualMODE it is possible to perform other important tests. Let us assume you are installing a Cat-6 system in a country whose government agency uses a national standard based on ISO. But you are working with cables and connection components manufactured by a company in the US. The government agency can request a certification according to ISO Class E from the installer. However, for warranty reasons the US company might insist on TIA 568 Category 6. Therefore, in the past both certifications were required - in compliance with ISO and TIA - and the increased costs had to be passed on to the customer. In contrast, DualMODE makes it possible to perform both certifications at the same time, in compliance with ISO Class E Permanent Link and TIA 568B Category 6. The costs are the same as for one test. Another example for the use of DualMODE is the calculation of margins in relation to higher bandwidth for future applications. Up to now you had to check the certification documents for Category 6 Permanent Link and assess whether adequate margins for transmission of applications at higher bandwidth are available. However, assessment of the complete final data would also require a certification according to Category 6 A. Due to higher test costs, these measures would usually not be performed. With DualMODE you can certify the system in compliance with Category 6, and perform tests with the limits of Category 6 A. Due to unmistakable data, your customer would know exactly what cable lines support higher bandwidths in future applications. This information would be of great importance when making a decision on whether to assemble cables with connectors of a higher category, or to pull in cables of a higher category. 5.6.1. Implement DualMODE 1. Open "Cable Type" on start screen. 2. Use Arrow Keys to navigate to function Twisted Pair DualMODE and confirm with Enter. Illustration 1 5.6.1. Twisted Pair DualMODE 3. Use Arrow Keys to navigate to desired cable types. Use soft key to enable, and soft key Deselect All to disable your selection. An enabled pairing is indicated by the green box. 4. If you would like another link model, or edit and calculate NVP for the DualMODE pairing, press Shift. 46
Page 1 and 2: LanTEK ® II Series Manual 0
Page 3 and 4: Standard Warranty Policy of IDEAL I
Page 5 and 6: Table of contents CHAPTER 1 Your La
Page 7 and 8: Table of contents 6.11.1. Insertion
Page 9 and 10: Table of contents 13.1. Technical S
Page 11 and 12: Chapter 1 Your LanTEK ® II Cable C
Page 13 and 14: CHAPTER 2 Product Description 2.1.
Page 15 and 16: Chapter 2 Product Description 2.1.2
Page 17 and 18: Chapter 2 Product Description 2.2.
Page 19 and 20: 2.3. Power Management Chapter 2 Pro
Page 21 and 22: CHAPTER 3 Basics of the Cable Test
Page 23 and 24: Chapter 4 Preferences 1. Use Arrow
Page 25 and 26: Chapter 4 Preferences 1. Use Arrow
Page 27 and 28: Chapter 4 Preferences 6. Use soft k
Page 29 and 30: CHAPTER 5 Autotest Using Autotest,
Page 31 and 32: Chapter 5 Autotest Autotest Pref Th
Page 33 and 34: Chapter 5 Autotest 2. Use Arrow Key
Page 35 and 36: Chapter 5 Autotest 5.3.1. Simple Ca
Page 37 and 38: Chapter 5 Autotest 3. Use Alphanume
Page 39 and 40: Chapter 5 Autotest 5.4.1. Cable Nam
Page 41 and 42: Chapter 5 Autotest AAA A / AAA A -
Page 43 and 44: Chapter 5 Autotest Illustration 2 5
Page 45: Chapter 5 Autotest 20. Make correct
Page 51 and 52: Chapter 5 Autotest 5.9. Calibration
Page 53 and 54: Chapter 5 Autotest 5.9.2. Coaxial C
Page 55 and 56: Chapter 5 Autotest 3. Use soft key
Page 59 and 60: CHAPTER 6 Structured Cabling Testin
Page 61 and 62: Chapter 6 Structured cabling testin
Page 65 and 66: 6.11. Insertion Loss Test (Attenuat
Page 73 and 74: CHAPTER 8 Fiber Testing with FiberT
Page 75 and 76: Chapter 8 Fiber testing (LWL) Fiber
Page 87 and 88: CHAPTER 9 Tone Generator 9.1. Tone
Page 89 and 90: CHAPTER 10 IDEAL DataCENTER Softwar
Page 91 and 92: Chapter 10 IDEAL DataCENTER Softwar
Page 97 and 98:
Chapter 10 IDEAL DataCENTER Softwar
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Chapter 11 LanTEK Firmware Upgrade
Page 107 and 108:
Standards Organization Classificati
Page 109 and 110:
Chapter 13 Customer Service North/S
show all

LanTEKÂ® II Series Manual - Ideal Industries Inc.

Create successful ePaper yourself

Delete template?

Save as template?