LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc. LanTEK® II Series Manual - Ideal Industries Inc.
Chapter 5 Autotest 10. Press Enter to save the information entered. Escape allows you to exit the menu without making changes. 11. Use Arrow keys in Select Menu to navigate to option Link Models and confirm with Enter. 12. Use soft key to select the link model Perm, Basic, Channel, EIA, Flat Rate, Ignore or Skip. Illustration 5 5.5.2. Link Models 13. Use Arrow Keys to navigate to the individual boxes and use Alphanumeric Keys to assign the values for NEXT, Insertion Loss, Return Loss and ACR-F (ELFEXT). 14. Press Enter to save the information entered. Escape allows you to exit the menu without making changes. 15. Use Arrow keys in Select Menu to navigate to option Select Autotest and confirm with Enter. 16. Prepare the desired measuring modes for the Autotest by using Arrow Keys to navigate to the desired measuring modes. Enable or disable your selection with soft key . An enabled measuring mode is indicated by the green box. Illustration 6 5.5.2. Select Autotests 17. Press Enter to save the information entered. Escape allows you to exit the menu without making changes. 18. Use Arrow keys in Select Menu to navigate to option Custom Name/NVP and confirm with Enter. 19. Use Alphanumeric Keys to assign a name for the created cable type. 43
Chapter 5 Autotest 20. Make corrections to entries by using the soft keys (delete at cursor position), (delete characters to the left of cursor), / (insert alphanumeric characters at cursor position / overwrite highlighted entry). Illustration 7 5.5.2. Custom Name/NVP 21. Use Arrow keys to navigate to the individual boxes and assign desired NVP with the Alphanumeric Keys. 22. Press Enter to save the information entered. Escape allows you to exit the menu without making changes. 5.5.3. Edit and Calculate NVP 1. Use soft key to open Select Menu for editing and calculating NVP. 2. Use Arrow keys to navigate to the individual boxes and assign desired NVP with the Alphanumeric Keys. Illustration 1 5.5.3. NVP 3. Use soft key to open menu for entering cable length. 4. Use Arrow Keys to navigate to box and use Alphanumeric Keys to assign Cable Length (m). 5. Connect cable to be tested. 44
- Page 1 and 2: LanTEK ® II Series Manual 0
- Page 3 and 4: Standard Warranty Policy of IDEAL I
- Page 5 and 6: Table of contents CHAPTER 1 Your La
- Page 7 and 8: Table of contents 6.11.1. Insertion
- Page 9 and 10: Table of contents 13.1. Technical S
- Page 11 and 12: Chapter 1 Your LanTEK ® II Cable C
- Page 13 and 14: CHAPTER 2 Product Description 2.1.
- Page 15 and 16: Chapter 2 Product Description 2.1.2
- Page 17 and 18: Chapter 2 Product Description 2.2.
- Page 19 and 20: 2.3. Power Management Chapter 2 Pro
- Page 21 and 22: CHAPTER 3 Basics of the Cable Test
- Page 23 and 24: Chapter 4 Preferences 1. Use Arrow
- Page 25 and 26: Chapter 4 Preferences 1. Use Arrow
- Page 27 and 28: Chapter 4 Preferences 6. Use soft k
- Page 29 and 30: CHAPTER 5 Autotest Using Autotest,
- Page 31 and 32: Chapter 5 Autotest Autotest Pref Th
- Page 33 and 34: Chapter 5 Autotest 2. Use Arrow Key
- Page 35 and 36: Chapter 5 Autotest 5.3.1. Simple Ca
- Page 37 and 38: Chapter 5 Autotest 3. Use Alphanume
- Page 39 and 40: Chapter 5 Autotest 5.4.1. Cable Nam
- Page 41 and 42: Chapter 5 Autotest AAA A / AAA A -
- Page 43: Chapter 5 Autotest Illustration 2 5
- Page 47 and 48: Chapter 5 Autotest 5.6. DualMODE Fu
- Page 49 and 50: Chapter 5 Autotest Illustration 2 5
- Page 51 and 52: Chapter 5 Autotest 5.9. Calibration
- Page 53 and 54: Chapter 5 Autotest 5.9.2. Coaxial C
- Page 55 and 56: Chapter 5 Autotest 3. Use soft key
- Page 57 and 58: Chapter 5 Autotest Illustration 4 5
- Page 59 and 60: CHAPTER 6 Structured Cabling Testin
- Page 61 and 62: Chapter 6 Structured cabling testin
- Page 63 and 64: Chapter 6 Structured cabling testin
- Page 65 and 66: 6.11. Insertion Loss Test (Attenuat
- Page 67 and 68: Chapter 6 Structured cabling testin
- Page 69 and 70: Chapter 6 Structured cabling testin
- Page 71 and 72: Chapter 6 Structured cabling testin
- Page 73 and 74: CHAPTER 8 Fiber Testing with FiberT
- Page 75 and 76: Chapter 8 Fiber testing (LWL) Fiber
- Page 77 and 78: Chapter 8 Fiber testing (LWL) Fiber
- Page 79 and 80: Chapter 8 Fiber testing (LWL) Fiber
- Page 81 and 82: Chapter 8 Fiber testing (LWL) Fiber
- Page 83 and 84: Chapter 8 Fiber testing (LWL) Fiber
- Page 85 and 86: Chapter 8 Fiber testing (LWL) Fiber
- Page 87 and 88: CHAPTER 9 Tone Generator 9.1. Tone
- Page 89 and 90: CHAPTER 10 IDEAL DataCENTER Softwar
- Page 91 and 92: Chapter 10 IDEAL DataCENTER Softwar
- Page 93 and 94: Chapter 10 IDEAL DataCENTER Softwar
Chapter 5<br />
Autotest<br />
20. Make corrections to entries by using the soft keys (delete at cursor<br />
position), (delete characters to the left of cursor), /<br />
(insert alphanumeric characters at cursor position / overwrite highlighted entry).<br />
Illustration 7 5.5.2. Custom Name/NVP<br />
21. Use Arrow keys to navigate to the individual boxes and assign desired NVP with<br />
the Alphanumeric Keys.<br />
22. Press Enter to save the information entered. Escape allows you to exit the menu<br />
without making changes.<br />
5.5.3. Edit and Calculate NVP<br />
1. Use soft key to open Select Menu for editing and calculating NVP.<br />
2. Use Arrow keys to navigate to the individual boxes and assign desired NVP with<br />
the Alphanumeric Keys.<br />
Illustration 1 5.5.3. NVP<br />
3. Use soft key to open menu for entering cable length.<br />
4. Use Arrow Keys to navigate to box and use Alphanumeric Keys to assign Cable<br />
Length (m).<br />
5. Connect cable to be tested.<br />
44