LanTEK® II Series Manual - Ideal Industries Inc.

Chapter 5
Autotest
3. Use Alphanumeric Keys to enter an arbitrary value for Start and End. Meter is
reset after reaching final value.
4. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
5. Use symbol to lock a position into entered value. Use symbol to enable
Auto Increment of a character.
Illustration 2 5.3.2. Double Cable ID
6. Use soft keys and to switch between the views Cable From and
Cable To.
7. Use Alphanumeric Keys to enter a Cable Name for the Cable From/Cable To of
test portion.
8. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
9. Use Alphanumeric Keys to enter an arbitrary value for Start and End. Meter is
reset after reaching final value.
10. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
11. Use symbol to lock a position into entered value. Use symbol to enable
Auto Increment of a character.
12. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
36