LanTEK® II Series Manual - Ideal Industries Inc.

Chapter 5
Autotest
11. Use Alphanumeric Keys to enter a Cable Name for the Cable From/Cable To of
test portion.
12. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
13. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
14. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
5.3.2. Default Cable ID
Simple cable ID was not selected in Autotest Pref.
1. Use Arrow keys to navigate in "Cable ID" view to option Set… and press Enter.
Simple Cable ID (1 cable name)
2. Use Alphanumeric Keys to enter a Cable Name for the test portion.
3. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
4. Use Alphanumeric Keys to enter an arbitrary value for Start and End. Meter is
reset after reaching final value.
5. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
6. Use symbol to lock a position into entered value. Use symbol to enable
Auto Increment of a character.
Illustration 1 5.3.2. Single Cable ID
7. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
Double Cable ID (2 cable names, start/end)
1. Use Alphanumeric Keys to enter a Cable Name for the Cable From/Cable To of
test portion.
2. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
35