LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5<br />
Autotest<br />
5.3.1. Simple Cable ID<br />
2. Use Arrow keys to navigate in "Cable ID" view to option Set… and press Enter.<br />
Single Cable ID (1 cable name)<br />
3. Use Alphanumeric Keys to enter a Cable Name for the test portion.<br />
4. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an<br />
arbitrary value.<br />
5. Make corrections to entries by using the soft keys (delete at cursor<br />
position), (delete characters to the left of cursor), /<br />
(insert alphanumeric characters at cursor position / overwrite highlighted entry).<br />
Illustration 1 5.3.1. Single Cable ID<br />
6. Press Enter to save the information entered. Escape allows you to exit the menu<br />
without making changes.<br />
Double Cable ID (2 cable names, start/end)<br />
7. Use Alphanumeric Keys to enter a Cable Name for the Cable From/Cable To of<br />
test portion.<br />
8. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an<br />
arbitrary value.<br />
9. Make corrections to entries by using the soft keys (delete at cursor<br />
position), (delete characters to the left of cursor), /<br />
(insert alphanumeric characters at cursor position / overwrite highlighted entry).<br />
Illustration 2 5.3.1. Double Cable ID<br />
10. Use soft keys and to switch between the views Cable From and<br />
Cable To.<br />
34
Change language