LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5<br />
Autotest<br />
5.3. Set Cable Name (cable ID)<br />
The cable name of the cable lines in an Autotest consists of a fixed Cable Name and a<br />
variable Current Value (4-digit test meter) that automatically increments. Depending on<br />
selected Autotest Pref it is also possible to specify structure and way of counting.<br />
1. Use Arrow keys to navigate to "Cable ID" and press Enter.<br />
The name used last will appear:<br />
Illustration 5.3. Cable ID<br />
‣ Single Cable ID (1 name is assigned to each cable).<br />
or<br />
‣ Double Cable ID (2 names are assigned to each cable, one for the start and one for the<br />
end of the cable).<br />
Illustration 5.3. Cable ID<br />
‣ <strong>Inc</strong>rement… when pressing Enter, the current value of the test meter, shown in view<br />
below, is incremented by one position.<br />
‣ Set… opens menu for cable name.<br />
‣ Select… switches between Single Cable ID and Double Cable ID.<br />
33