LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 5<br />
Autotest<br />
Autotest Pref<br />
This will permanently<br />
delete the Tests / Jobs<br />
from the tester<br />
Description<br />
Enables confirmation prompt prior to deleting data.<br />
Disable Fiber Autotest<br />
Length<br />
Enable 606A<br />
Enable Tera to Tera<br />
Mode<br />
Enable Wiremap On<br />
Failed Autotest.<br />
Enable / disable length measurement of fiber (LWL) with FiberTEK FDX<br />
during Autotest.<br />
Enable labelling standard TIA/EIA 606-A for telecommunication<br />
infrastructure as cable ID.<br />
NOTE:<br />
If labelling standard TIA/EIA 606-A is enabled; the selected cable<br />
name (simple cable ID/default cable ID) is not applied.<br />
Enables Tera to Tera Mode instead of Tera to RJ45 Mode.<br />
In case of failed Autotest, it determines whether another fault analysis<br />
will automatically be performed.<br />
5.2. Select Job Folder<br />
The name of the current job folder is shown in the TFT display on the ready screen. To save<br />
the Autotest it is possible to keep this job folder, enable another existing job folder, or create<br />
a new job folder.<br />
5.2.1. Enable Existing Job Folder<br />
1. Use Arrow keys to navigate to "File" and press Enter to open the job list.<br />
Illustration 1 5.2.1. File<br />
30