Mi Distribution boards - IC SYSTEMS automatika
Mi Distribution boards - IC SYSTEMS automatika
Mi Distribution boards - IC SYSTEMS automatika
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Mi</strong> <strong>Distribution</strong> <strong>boards</strong> <br />
Assembly<br />
Assembly of<br />
<strong>Mi</strong>-<strong>Distribution</strong><br />
<strong>boards</strong><br />
LES<br />
Service<br />
<strong>Mi</strong><br />
KV<br />
DK<br />
Subsequent installation of upper<br />
box fin.<br />
Installation devices can be<br />
fastened on mounting plates<br />
with self-threading screws.<br />
DIN rail fastening on spacers<br />
<strong>Mi</strong> DS 50.<br />
• Step 4:<br />
Installation of equipment<br />
in protection plate.<br />
MC<br />
Notes to<br />
<strong>Mi</strong> Circuit breaker<br />
boxes<br />
Spare equipment openings in<br />
protection covers are to be covered<br />
with the blanking strips<br />
to prevent accidental contact<br />
(blanking strips are<br />
enclosed for 50 % of<br />
equipment openings).<br />
Circuit breaker boxes can be<br />
fitted with any DIN rail equipment,<br />
if per row (12 modules<br />
12 x 18 mm) the assigned<br />
back-up fuse won‘t exceed<br />
80 A .<br />
Pre-drill the sections at the corners.<br />
Then saw away the sections<br />
from the protection plate<br />
by using a piercing saw with<br />
coarse toothed saw blades for<br />
plastics (e.g. Bosch T 101 B).<br />
Blanking strips (attached) for<br />
unused equipment openings in<br />
protection covers.<br />
Screw the support for the<br />
protection plate <strong>Mi</strong> EP 02 at the<br />
base of the box.<br />
PE and N terminals for copper<br />
conductors (installed).<br />
Put on the protection plate.<br />
<br />
<br />
Dimension of 1 module<br />
1 module = 18 mm<br />
<br />
<br />
183<br />
HENPAS<br />
Technics<br />
References/Types