Mi Distribution boards - IC SYSTEMS automatika
Mi Distribution boards - IC SYSTEMS automatika
Mi Distribution boards - IC SYSTEMS automatika
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KV<br />
<strong>Mi</strong><br />
MC<br />
LES<br />
Technics<br />
<strong>Mi</strong> <strong>Distribution</strong> <strong>boards</strong> <br />
Assembly<br />
Service<br />
• Step 3:<br />
Assembly of the boxes<br />
DK<br />
A self-adhesive wall gasket is<br />
stuck to the box wall to seal<br />
the boxes in position (applies to<br />
closed box walls, too.)<br />
The boxes are assembled by<br />
means of wedge connections.<br />
Screws M 6x15 may be used<br />
instead of wedges.<br />
The wall clamp is pressed onto<br />
the box fins to increase the<br />
rigidity.<br />
Wall separator for subdivision of<br />
300 mm box walls into 2 x 150<br />
mm for flange or box mounting<br />
Cable entry via flanges.<br />
Assembly of flanges by means<br />
of four fastening wedges on the<br />
box wall.<br />
HENPAS<br />
Knock out for cable entries by means of a screwdriver.<br />
References/Types<br />
182<br />
The respective box wall is<br />
knocked out and the upper box<br />
fin next to the wedge fastening<br />
is sawed out.<br />
Then the cable insertion is<br />
screwed on and the rubber<br />
entries are fitted.<br />
The cable is inserted into the<br />
box from the front.
Change language