Technical Data - IC SYSTEMS automatika

Circuit-breakers, switch-disconnectors
Multi-function device adapter
123
Moeller SK1230-1157GB-INT
Rated
current
Supply cable/terminal
Adapter
width
For surface
mounting of
(example)
Terminal
compartment
W x H
Tightening torque
Fixing screw Terminal
screw
I e
A mm mm Nm Nm
Multi-function device adapter for busbar system 60 mm
Component adapter for NZM1, (P)N1 circuit-breakers and switch-disconnectors
For mounting on flat copper busbars 20/30 x 5 mm or 20/30 x 10 mm and 800 or 1600 A rigid copper busbars.
Mounted by latching onto de-energized busbar
Rated operational voltage U e : 690 V AC
Not UL/CSA approved
125 Connection cable
35 mm 2 included
90 NZM1
PN1, N1
Part no.
Article no.
– 4 – 6 – AD100/5
272059
Price
see price
list
Std. pack
1 off
Circuit-breakers, switch-disconnectors
up to 1600 A
125 90 NZM1
PN1, N1
– 4 – 6 – AD100/10
272150
1 off
Component adapter for NZM2, (P)N2 circuit-breakers and switch-disconnectors
For mounting on 30 x 10, 20 x 10, 20 x 5 mm flat copper busbars and 800/1600 A rigid copper busbars.
Mounting using clamp and screw fixing.
Rated operational voltage U e : 690 V AC
Connection cable not included as standard.
not UL/CSA approved
200 Round conductor:
6 – 70 mm 2 ;
Cu-band (n x B x H):
9 x 9 x 0.8
110 NZM2
PN2, N2
13 x 10 4 – 6 2 – 3 SV34381
272058
1 off
250 Round conductor:
50 – 120 mm 2 ;
Cu-band (n x B x H):
6 x 16 x 0.8
110 NZM2
PN2, N2
16 x 12 4 – 6 8 – 10 SV34372
272335
1 off
Notes
When using adapter SV... to assemble an NZM with rotary handle a minimum distance of 18 mm must be maintained.
The busbars in the area between the adapters can be covered by the SV30921/SV35061