Technical Data - IC SYSTEMS automatika

116 Circuit-breakers, switch-disconnectors
Accessories
Circuit-breakers, switch-disconnectors
up to 1600 A
Description
Diagnostic and configurator software for NZM and DMI (at the machine)
PC software for direct connection to all new NZM circuitbreakers
with electronic releases (IEC and UL/CSA
devices) or for direct connection to the DMI module,
including the connection cable.
Protection parameters: Online display and characteristic
representation, export option to “Moeller CurveSelect”
characteristics program.
Warning and trip messages: Read of the diagnostics
memory even in a no-voltage state.
Load currents: Display and trend representation.
Recording and export feature to MS-Excel for load
currents and diagnostic messages.
Configuration of the DMI: motor starter, remote
operator, assignment of the DMI inputs and outputs and
displays.
Part no.
Article no.
NZM-XPC-KIT
265631
Price
see price
list
Std. pack
Notes
Moeller SK1230-1157GB-INT
1 off Only suitable for use in conjunction
with circuit-breakers having
electronic releases.
Free-of-charge download of the
manual AWB1230-1459 and a
demo software at
www.moeller.net.
Data Management Interface (DMI Module)
Query of diagnostics and operational data, display of
currents, motor starter function, parameterization and
control of the circuit-breaker with electronic release.
Comprehensive remote diagnostic options and remote
operation via fieldbus in combination with fieldbus
connection.
Inclusive NZM-XDMI-CAB connection cable between
NZM and DMI (length: 2 m).
DEL ALT
ESC OK
NZM-XDMI612
260217
1 off Only suitable for use in conjunction
with circuit-breakers having
electronic releases.
Free download of manual
AWB1230-1441 at
www.moeller.net.
Expansion unit, networking
Connection to the DMI module for transfer of the phase currents, parameter-,
status- and diagnostics data as well as the position of the circuit-breaker (wiring
of the auxiliary contact to the DMI inputs).
DMI configuration via field bus.
Actuation of the DMI motor starter function and the NZM remote operator (via
DMI output wiring).
Detection of digital inputs and actuation of the outputs via the fieldbus.
Fieldbus interface: to PROFIBUS-DPV1 slave.
Can be operated with class 1 and class 2 masters.
Addresses available: 1 to 126
Fieldbus connection to CANopen
Addresses available: 1 to 127
Fieldbus connection to DeviceNet
Addresses available: 0 to 63
NZM-XDMI-DPV1
270333
EASY221-CO
233539
EASY222-DN
233540
1 off Connected to the DMI module and
has the same contour appearance.
Replaces the DPV0 interface
1 off EASY204-DP.
1 off
Switched-mode power supply unit
for DMI module
• Rated input voltage: 50/60 HZ: 115/230 V AC
• Rated output voltage (residual ripple): 24 V DC (g 3 %)
• Rated output current: 1.25 A
EASY400-POW
212319
1 off –
Telescopic adapter
for DMI module
For equalization of the mounting depth when rear mounted in CI-K.. enclosures
and cabinets.
With 35 mm top-hat rail IEC/EN 60715, adjustable from
75 – 115 mm. Screw-on and snap fitting.
M22-TA
226161
1 off –