Technical Data - IC SYSTEMS automatika

114
Circuit-breakers, switch-disconnectors
NZM4 terminals
Circuit-breakers, switch-disconnectors
NZM4 terminals
115
Circuit-breakers, switch-disconnectors
up to 1600 A
Moeller SK1230-1157GB-INT
Moeller SK1230-1157GB-INT
Max. cable For use with Terminal capacities Terminal capacities Part no.
Type of conductor Terminal AWG/kcmil
Copper busbar
capacities
width x thickness
Control circuit terminal
– NZM3(-4),
PN3, N(S)3(-4)
NZM4(-4),
N(S)4(-4)
Three- and
four-pole
Screw connection 1 x 0.75 – 2.5
2 x 0.75 – 1.5
Cu strip
(number of segments x
width x segment thickness)
mm 2 mm mm
1 x 18 – 14
2 x 18 – 16
Article no.
when ordered
separately
NZM3/4-XSTS
266797
Price
see price
list
Std. pack
Notes
1 off Type contains parts for two terminal locations located at
top or bottom for 3 or 4-pole circuit-breakers.
Included as standard with tunnel terminal
Degree of protection IP1X
NZM-XSTK cannot be combined with NZM3(-4)-XIPK or
NZM4(-4)-XIPK IP2X protection against contact with a
finger.
Height or thickness of the control circuit terminals:
NZM-XSTK = 2 mm
NZM-XSTS = 2 mm
Circuit-breakers, switch-disconnectors
up to 1600 A
Cover
– NZM4,
N(S)4
– NZM4-4,
N4-4
3 pole NZM4-XKSA
266846
4 pole NZM4-4-XKSA
266847
1 off Type contains parts for a terminal located at top or bottom
for 3 or 4-pole circuit-breakers.
1 off Protection against direct contact where cable lugs, busbars,
flat conductor terminals or tunnel terminals are used.
Contained in kit with module plates, flat conductor
terminals and tunnel terminals.
Degree of protection IP4X at front, side and rear, on the
connection side when using insulated conductor material to
IP1X.
Terminal cover
– NZM4,
N4
– NZM4-4,
N4-4
3 pole NZM4-XKSFA
292193
4 pole NZM4-4-XKSFA
292194
1 off Type contains parts for a terminal located at top or bottom
for 3 or 4-pole circuit-breakers.
1 off Enhancement of the protection against direct contact to
(simplified protection against contact with a finger).
Phase isolators
– NZM4
N(S)4
– NZM4-4
N4-4
3 pole NZM4-XKP
281595
4 pole NZM4-4-XKP
281596
1 off Type contains parts for a terminal located at top or bottom
for 3 or 4-pole circuit-breakers.
Included with the connection width extension.
Cannot be combined with the tunnel terminal
NZM4(-4)-XKA, connection NZM4-XKR on rear.
1 off
Insulation protection where cable lugs, busbars, module
plates or flat cable terminals are used.
Cable lug
not UL/CSA approved
185 mm 2 NZM3(-4),
PN3, N3(-4)
3 and 4 pole NZM3-XKS185
260040
240 mm 2 NZM4(-4),
NZM3-XKS240
N4(-4)
260041
3 off Type contains a cable lug for 3-pole or 4-pole switches.
Special cable lug, narrow style
3 off