Technical Data - IC SYSTEMS automatika

106
Circuit-breakers, switch-disconnectors
NZM3 terminals
Circuit-breakers, switch-disconnectors
NZM3 terminals
107
Circuit-breakers, switch-disconnectors
up to 1600 A
Cover
Max. cable
connection
area
– NZM3(-4),
PN3(-4),
N(S)3(-4)
Moeller SK1230-1157GB-INT
For use with Terminal capacities Terminal capacities Part no.
Type of Terminal AWG/kcmil
conductor capacities
Cu strip (number of
segments x width x
segment thickness)
mm 2 mm mm
Copper busbar
width x
thickness
Moeller SK1230-1157GB-INT
Article no.
when ordered with
basic unit
Price
see price
list
Part no.
Article no.
when ordered
separately
3 pole NZM3-XKSA
260045
– 4 pole NZM3-4-XKSA
266801
Price
see price
list
Std. pack
Notes
1 off Type contains parts for a terminal located at top or bottom for
3 or 4-pole circuit-breakers.
1 off Insulation/protection against direct contact where cable lugs, busbars or
tunnel terminals are used.
Included in set with tunnel terminals
Degree of protection IP1X on the connection side when using insulated
conductor material.
Circuit-breakers, switch-disconnectors
up to 1600 A
Phase isolator
– NZM3(-4),
PN3(-4),
N(S)3(-4)
3 pole NZM3-XKP
100512
– 4 pole NZM3-4-XKP
100513
1 off Type contains parts for a terminal located at top or bottom for
3 or 4-pole circuit-breakers.
1 off Included with the connection width extension.
Cannot be combined with the NZM3(-4)-XKA tunnel terminal,
NZM3-XKR connection on rear.
Insulation protection where cable lugs, busbars or flat conductor.
Connection cover, knockout
– NZM3(-4),
PN3(-4),
N(S)3(-4)
3 pole NZM3-XKSFA
104642
– 4 pole NZM3-4-XKSFA
104643
1 off Type contains parts for a terminal located at top or bottom for
3 or 4-pole circuit-breakers.
1 off Enhancement of the protection against direct contact to (simplified
protection against contact with a finger).
IP2X protection against contact with a finger
For box terminals
NZM3(-4),
PN3(-4),
N3(-4)
3 pole NZM3-XIPK
266804
4 pole NZM3-4-XIPK
266805
1 off Type contains parts for a terminal located at top or bottom for
3 or 4-pole circuit-breakers.
1 off Enhancement of the protection against direct contact to IP2X.
Protection when reaching into the cable connection area with the
connection of cables in the box terminal.
With 2 conductors minimum cross-section 70 mm 2 00 or AW00.
Cannot be combined with NZM-XSTK control circuit terminal.
For cover NZM3(-4)-XKSA or NZM3...(C)NA and N(S)3...NA
NZM3(-4),
PN3(-4),
N(S)3(-4)
3 pole NZM3-XIPA
266808
4 pole NZM3-4-XIPA
266809
1 off Type contains parts for a terminal located at top or bottom for
3 or 4-pole circuit-breakers.
1 off Enhancement of the protection against direct contact to IP2X.
When mounting NZM3-..-(C)NA or N3...-NA the following applies:
With 2 conductors minimum cross-section 70 mm 2 00 or AW00.
Copper cable lug
not UL/CSA approved
When using cable lugs without NZM3(-4)-XKSA cover, they must be insulated.
240 mm 2 NZM3(-4),
PN3, N3(-4)
NZM4(-4),
N4(-4)
Threeand
fourpole
NZM3-XKS240
260041
185 mm 2 NZM3-XKS185
260040
3 off Type contains a cable lug for 3-pole or 4-pole switches.
Special cable lug, narrow style
3 off