Process Control System

B7 – 4
Commissioning
B.7.3 – Controller settings
(Detailed information regarding the operation of the controller can be found in the
operating instructions of the controller, chapter 6. Please observe the notes on safety in
the operating instructions of the controller.)
The industrial controller can be configured via a number of different
menus. The configuration level of the controller can be accessed by
simultaneously pressing the SELECT and ENTER keys (for 5 seconds).
Temperature
control
Flow
control
Filling level
control
Structure standard standard standard
Input1 Pt100 3-wire Frequency 0-20mA
- Fre: 1000 Rad: off
Scaling - X1o 100.0 X1o 100.0
- X1u 0.00 X1u 0.00
Setpoint limits W1o 60.00 W1o 100.0 W1o 100.0
W1u 0.00 W1u 0.00 W1u 0.00
Alarm mode Al abs Al abs Al abs
Alarm limits X1+ 60.00 X1+ 100.0 X1+ 100.0
X1- 0.00 X1- 0.00 X1- 0.00
Hy 1.00 Hy 1.00 Hy 1.00
Filter Fg1 20.00 Fg1 20.00 Fg1 20.00
Controller Kp 4.00 Kp 3.50 Kp 28
Tn 2500 Tn 0.40 Tn 5.00
Tv 0.00 Tv 0.00 Tv 0.00
Y0 0.00 Y0 0.00 Y0 0.00
Output 2Pkt-PWM steady-state steady-state
Signal type 0-10V 0-10V
Periodic time T+ 10.00
Correcting variables- Yo 100.0 Yo 100.0 Yo 100.0
limit Yu 0.00 Yu 0.00 Yu 0.00
Direction of control action Inv no Inv no Inv no
Pulse output Imp no
Safety
Ys 0.00 Ys 0.00 Ys 0.00
Adap.contr.
Tune off Tune off Tune off
Additions
with visualisation
software
Adapt off Adapt off Adapt off
Language English Language English Language English
Serial remote Serial remote Serial remote
Profibus Addr 002 Addr 003 Addr 005
RS232 Addr 1 Addr 1 Addr 1
BinIn not BinIn not BinIn not
BinOut not BinOut not BinOut not
Ramp out Ramp out Ramp out
SPT out SPT out SPT out
Line2 Act. vaI. Line2 Act. val. Line2 Act. val.
Code - Code - Code -
Process Control System• Festo Didactic