Pneumatics training system - Bosch Rexroth

20 Pneumatics training system | Workplaces
Extensions for the workplace
Extensions for the workplace
Mains connection cable for USA
Material no. 1827003742
Connection cable for power supply unit or multiple socket.
Mains plug in design according to US/ISO plug, three-wire, suitable
for power supply unit with mat. no.: 1827003740
Length m 2
Weight g 175
Protection class IEC 60529 IP 20
Operating voltage V AC 115
Line cross-section mm² 3 x 1.5
Information board
Material no. 1827003721
For displaying information at the workplace in an ergonomic way as
it is necessary for completing the training exercise, e.g. circuit diagrams,
unit descriptions, work instructions. Thus, direct access at
the workplace is guaranteed.
2-times jointed support profile, with mounting kit for attachment at
the side frame of the device carrier via nuts in the aluminum groove
profile or grooved plate, height-adjustable, cover with a moveable
acrylic protective shield, for sheet size DIN A4.
Dimensions mm (L x W x H) 370 x 280 x 80
Weight kg 3.5
Color RAL 7016 Anthracite gray
Size
DIN A4
Screen support arm
Material no. 1827003725
The support arm with 2 joints and rotatable retaining surface
(415 mm x 415 mm) promotes an ergonomic furnishing of the workplace
with monitor and keyboard.
The support arm is suitable for attachment at the device carrier's
side frame. The assemblies:
Support arm of anodized aluminum profiles with 2 joints,
pivoting radiuses 250 mm each,
retaining surface made of sheet steel, pivot-mounted,
retaining bracket for keyboard, chrome-plated round steel,
with mounting kit.
Dimensions mm (L x W x H) 730 x 420 x 180
Weight kg 8.3
Load-bearing capacity N 250
Bosch Rexroth AG, 06.2012, RE 00847