Pneumatics training system - Bosch Rexroth

18 Pneumatics training system | Workplaces
Extensions for the workplace
Extensions for the workplace
Electrical attachment control carriage
Material no.
R961000279
Bracket for electronic assemblies, for setting up electrical circuits,
connected to measuring cable, usable on both sides, suitable for
the "Snap-In" rapid mounting system.
For attachment to the control carriage. Profile frame made of aluminum
groove profiles, with 8 mm groove, within the profile frame,
there is a view plate made of sheet steel coated in blue.
Grid dimension 100 mm.
Dimensions mm (L x W x H) 850 X 165 X 30
Weight kg 2.74
Color RAL 5010 Blue
Working surface mm (L x W) 850 x 130
Power supply unit for DS3 and DS4 230 V~/4.5 A
Material no.
R961000170
Power supply unit for supplying the control and measuring electronics,
for operating the electrical components.
Can be installed into each side frame of the device carrier in
a space-saving way, also subsequently.
Operating surface and housing of coated metal, with mains switch and
indicator lamp, short-circuit-proof, 4 connection sockets for DC output,
power supply unit according to EN60320-1 / DIN VDE 0625-1, connector
to the power supply unit according to DIN49441-R2 / CEE7,
creates safety extra low voltage.
Connection cable not included in the scope of delivery (see accessories).
Dimensions mm (L x W x H) 360 x 162 x 47
Weight kg 1.9
Color RAL 5010 Blue
Protection class IEC 60529 IP 20
Supply voltage V AC 230
Mains frequency Hz 47..63
Output voltage V DC 24
Current consumption A 4.5
Short-circuit-proof
Yes
Accessories
Mat. no. Quantity Recommended accessories
1827003724 1 Mains connection cable for Germany
Bosch Rexroth AG, 06.2012, RE 00847