Struktury automatizace průmyslového podniku
Struktury automatizace průmyslového podniku Struktury automatizace průmyslového podniku
30.9.2013 Identifying a Module Type Several characteristics: RSLogix 5000 Software I/O Configuration Module Slot Number I or O for Input or Output A for AC, B for DC, F for Fast Response Analog 1756 - O B 16 D Number of Points or Channels Suffix – (Diagnostic, Electronic Fusing, Individually Isolated, Voltage Only, Current Only, etc.) 32 Identifying an I/O Module Tag I/O format: Location:Slot:Type.Member.Bit “Local” or Module Name for Remote I/O Point (Optional) “Data” (I/O values), “Fault,” etc. “I” for Input, “O” for Output, “C” for Configuration Module Slot Number 33 16
30.9.2013 Example: Digital I/O Tags Digital output module in slot 0 of local chassis: 1756-OB16D Module – Slot 0 Diagnostic Data Data Per Point 34 Types of Scans • Continues task (spojitá úloha) PLC scans the program code from top to bottom. When it completes, it goes back to the top and restarts the process. I/O scans program scans 1. A continuous task is how PLC traditionally operates. 2. Continues tasks are performed at irregular intervals. 3. A watchdog monitors the scan time. If it exceeds predefined value, an execution fault is displayed because PLC could accidentally lose an input signal. 4. First scan (or first pass) – when the PLC is first powered ON or whenever the PLC program is started – used for initializations 35 17
- Page 1 and 2: 30.9.2013 Průmyslová informatika
- Page 3 and 4: 30.9.2013 Klasické PLC Vzorkován
- Page 5 and 6: 30.9.2013 Lokální / Distribuovan
- Page 7 and 8: 30.9.2013 ControlNet: Key Terms Loc
- Page 9 and 10: 30.9.2013 Logické I/O adresy Allen
- Page 11 and 12: 30.9.2013 Two-slot Addressing Logic
- Page 13 and 14: 30.9.2013 Tabulka vytvářena modul
- Page 15: 30.9.2013 Klasické PLC / ControlLo
- Page 19 and 20: 30.9.2013 Continues, Periodic, and
- Page 21 and 22: 30.9.2013 Therac 25 - těžká chyb
- Page 23 and 24: 30.9.2013 1 of 2 errors Error is cl
- Page 25 and 26: 30.9.2013 P2P komunikace communicat
- Page 27: 30.9.2013 Busses and processors in
30.9.2013<br />
Identifying a Module Type<br />
Several characteristics:<br />
RSLogix 5000<br />
Software I/O<br />
Configuration<br />
Module Slot Number<br />
I or O for Input or Output<br />
A for AC, B for DC, F for Fast Response Analog<br />
1756 - O B 16 D<br />
Number of Points or Channels<br />
Suffix – (Diagnostic, Electronic<br />
Fusing, Individually Isolated,<br />
Voltage Only, Current Only, etc.)<br />
32<br />
Identifying an I/O Module Tag<br />
I/O format:<br />
Location:Slot:Type.Member.Bit<br />
“Local” or Module Name for Remote<br />
I/O Point (Optional)<br />
“Data” (I/O values), “Fault,” etc.<br />
“I” for Input, “O” for Output,<br />
“C” for Configuration<br />
Module Slot Number<br />
33<br />
16