t&s brass & bronze - Heritage Food Service Equipment, Inc.

PH 800.458.5593 FX 800.800.4981 

T&S PRE-RINSE UNITS 

T&S BRASS 

B123 T&S BRASS PRE-RINSE UNIT 

• 8” center deck faucet (2829-40) 

• Union coupling connections 

• 1/2” IPS female eccentric flanged inlets (AA) 

• 40” high, 15” overhang 

• 9” clearance 

• B107 spray valve 

• 24” riser (372-40) 

• B44H flexible stainless steel hose 

B123B with B109-1 6” wall bracket 

B123BR with B109-1 6” wall bracket 

and B44R Durastrong PVC hose 

B123BT with British thread inlets and B109-1 

6” wall bracket 

B123R with B44 Durastrong PVC hose 

B2277 with B44V9 hose with back flow preventer 

furnished with B425 supply nipples and locknuts 

B2288 same as B123 but with 4” centers 

B2290 same as B2288 but with B109-1 wall bracket 

and B426 supply nipples and locknuts 

B2352 same as B123B with 7.09” centers 1/2” BSP 

male inlets and Kiwa approved check valves 

B133 PRE-RINSE UNIT 

• 8” center wall mounted faucet (2832-40) 


• 34” high 

• 15” overhang 

• 18” riser model 369-40 




B133-BT with British threads and B109-1 


B133-BR with B109-1 6” wall bracket and B44R 

Durastrong PVC hose 

B133C with B107C low flow spray valve 

B133R with B44R Durastrong PVC hose 

B2278 with B44V9 hose with back flow 

preventer and B425 supply nipples and locknuts 

Note: Use ZZ inlets for base faucet with mounting 

45º returns 


• 8” center wall mounted faucet (2832-40) 

• Union coupling connections 


• Gooseneck reaches 12” over sink at top 

• 26” riser (373-40) 



B131B with B1091 6” wall bracket 

B131BT with 1/2” BSPT female threads and B109-1 

wall bracket 



B131-R with B44R Durastrong PVC hose 

B132 gooseneck reaches 18” over sink at top 

Note: Use ZZ inlets on base faucet with mounting 

on 45º returns 

Note: Use KK inlets on base faucet with mounting 

on 45º returns 

332 

T&S BRASS | Heritage Food Service Equipment, Inc.

T&S BRASS 


B114 T&S BRASS DECK MOUNT SWIVEL 

• 1/4” NPT male inlets on 4” centers 

• 1 1/8” O.D. x 2 1/4” shank 

• 50” high with a 24” overhang 

• Contains internal check valves 

• Chrome plated brass 



• Under sink 1/4” IPS tailpieces 

• Gooseneck reaches 12” over sink at top 

• Height above sink top = 39” 


B111-BR with B109-1 6” wall bracket 


B111BT with 1/2” BSPT female inlets and B109-1 



B112 Gooseneck reaches 18” over sink 

at top height above sink top = 44” 

B113 T&S BRASS RE-RINSE UNIT 



• Approximately. 48” high 

• Overhang = 15” 

• 9” clearance 

• 24” riser model 372-40 


• B44H Flexible stainless steel hose 

B1113 with B109-1 6” wall bracket 

B113BC with B109-1 6” wall bracket 

and B107C low flow spray valve 

B113BT with British thread inlets and B109-1 




B113C with B107C low flow spray valve 


B113V9 with B44V9 flexible stainless steel hose 

with B970FE Vacuum Breaker 

T&S BRASS 

Heritage Food Service Equipment, Inc. | T&S BRASS 333

PH 800.458.5593 FX 800.800.4981 


T&S BRASS 

B173 T&S BRASS DECK MOUNT PRE-RINSE 

• 1/4” NPT male inlets on 4” centers 

• 1/2” NPS x 2 1/4” shank 




B114-1 PRE-RINSE UNIT 

• Roto flex swivel design 





• Dim. S = 29” 


B114-1B with B109-1 wall bracket 

B114-1C with B107C low flow spray valve 

B114-2 dim. S = 23” 

B114-2C same as B114-2 except with B107-C low flow 

spray valve 

B114-3 dim S = 19” 

B114-3C same as B114-3 except with B107C low flow 

spray valve 

REPAIR KIT FOR B114RK 

includes: 

• 9 O-rings 

• 2 Shafts 

• 3 Locktight packs 

• 2 End caps 

• 5 Bearings 

• 2 Center sleeves 

• Will repair both 

knuckles and elbow 

B129 T&S BRASS WALL MOUNT 

“T-40” PRE-RINSE 

• 1/2” NPT female inlets on 8” centers 




334 


T&S BRASS 



FAUCET AND SPRAY ASSEMBLY 


• 12” spout and 96” stainless steel hose 




PRE-RINSE WITH CONCEALED MOUNTINGS 




T&S BRASS 


PH 800.458.5593 FX 800.800.4981 

PARTS AND ACCESSORIES T&S PRE-RINSE UNITS 

T&S BRASS UPGRADE KIT 

“T-40” PRE-RINSE 

• Can be added to most pre-rinses including 

competitive models with a 3/8” NPT riser 

• 21” overhang 

• Does not include lower-riser tube (reference number 5) 

Ref. No. Item No. Description 

1 5255-40 Tee swivel 

2 5252-20 Swivel arm 

3 5311-40 Hose balance — with hose clamps 

4 B109-1 Wall bracket 

5 372-40 24” lower-riser tube 

6 B970FE 3/8” NPT vacuum breaker 

7 B68H 68” hose with handle 

8 B107C35 Angled water savings spray valve 

REPAIR KITS FOR T&S BRASS 


T&S BRASS 

9. 9228-40 Knuckle joint assembly 

• Contains one each of shaft, end cap, sleeve, 

loctite pack and lubricant; two each of bearings; 

four each of o-rings 

10. 9227-40 Elbow joint assembly 

• Contains one each of swivel elbow assembly, loctite 

pack and lubricant; two each of end caps, bearings; 

four each of o-rings 

336 


T&S BRASS 


PRE-RINSE ASSEMBLY 

PARTS FOR T&S BRASS 

Ref. Item No. Description 

1 888-45 Spring 

2 821-40 Spring body 

3 369-40 18” riser tube 

3 372-40 24” riser tube 

3 376-40 32” riser tube 

4 21-40 Finger hook and screw 

5 922-45 Handle Screw 

6 1661-45 Index Button (Hot) 

7 1637-45 Lever Handle (Hot) 

8 2712-40 Hot Spindle Assembly 

9 2711-40 Cold Spindle Assembly 

10 1636-45 Lever Handle (Cold) 

111660-45 Index Button (Cold) 


13 2290-45 Washer 

14 965-45 Nut 

15 736-20 Spreader Nut 

16 1041-45 Gasket 

17 1592-20 Tailpeice 

18 958-20 Tailpiece Nut 

19 2893-40 Coupling Flange (a) 

20 1019-45 Washer 

21 Hot Spindle Assembly (b) 

22 Cold Spindle Assembly (c) 

23 1019-45 Washer 

24 2893-40 Coupling Flange 

NOTE: (a) Part 1019-45 washer 

is included when ordering 

2893-40 coupling flange. 

(b) B-131 uses part 2712-40 

spindle assy. B-330 uses 2714- 

40 spindle assy. and includes 

screw, index button and handle. 

(c) B-131 uses part 2711-40 

spindle assy. B-330 uses 2713- 

40 spindle assy. and includes 

screw, index button and handle. 

PRE-RINSE STEM PARTS FOR T&S BRASS 

Ref. Item No. Description 

1 922-45 Handle screw 

2 1660-45 Cold index button 

2 1661-45 Hot index button 

3 1636-45 Cold handle 

3 1637-45 Hot handle 

4 718-25 Packing nut 

5 1098-45 Packing 

6 607-40 Bonnet 

7 2601-45 Bonnet gasket 

8 1908-25 Cold stem 

8 1907-25 Hot stem 

9 5016-45 Spring 

10 3164-45 Spring check seat 

111092-45 Seat washer 

— for older stems 

12 933-45 Seat screw — for older stems 

13 789-20 Removable insert — cold 

13 788-20 Removable insert — hot 

14 1022-45 Seat gasket 

• 2711-40 Cold stem assembly 

• 2712-40 Hot stem assembly 

T&S BRASS 


PH 800.458.5593 FX 800.800.4981 

T&S ADD ON FAUCETS PRE-RINSE ASSEMBLIES ACCESSORIES 

B100 PRE-RINSE SPRAY WITH FLEXIBLE STAINLESS 

STEEL HOSE 

• Pre-rinse spray 

• Designed for heavy duty use in industrial kitchens 

• Automatic shut-off valve with spray head (B107) 

• 3 ft.flexible stainless steel hose (B44H) 

• 1/2” IPS mail inlet 

• 48” overall length of unit 

B100BT same as B100 except with 1/2” BSPT British 

thread female adapter 

B955 same as B100 but with Durastrong reinforced PVC 

hose (B44R) 

B957 same as B100 but with clear vinyl hose 

with internal braiding (B44V) 

B950 FLEXIBLE STAINLESS STEEL HOSE WITH SELF 

CLOSING SPRAY VALVE 


• Same as B100 but with angle spray valve 

(2853-40) 

B956 same as B950 but with Durastrong 

reinforced PVC hose B44R 

B100C PRE-RINSE UNIT WITH ENERGY EFFICIENT SPRAY 


• Same as B100 except with B107C low 

flow spray valve 

• Fan jet with knife action spray 

• Energy efficient 

• 48” overall length 

B102A POT FILLER 

• Automatic shut-off valve (2851-40) 

• Hook nozzle 

• For use on large pots and steam kettles 

• Retaining ring for continuous flow of water 

• 5’ B68H flexible stainless steel hose 

• 1/2” IPS male inlet (547-25) 

B101 PRE-RINSE SPRAY WITH FLEXIBLE 

STAINLESS STEEL HOSE 


• Spray valve with rose spray and automatic shut off 

designed especially for use in fountains (2857-40) 

• Small, compact, efficient 

• 3 ft. flexible stainless steel hose (13E-36) 

• 1/2” IPS male inlet (alternative adapters available) 

• B101A same as B101 except with 2858-40 

spray valve with aerator to eliminate splashing 

T&S PRE-RINSE PARTS AND ACCESSORIES 

T&S BRASS 

1. 

2. 

T&S BRASS SWIVELS 

1. 2882-40 Swivel arm assembly 

• For use on pre-rinse B11 

• 12” length 

2. 2862-40 Swivel adapter 

• For use on pre-rinse B175 faucet and spray 

B971 T&S BRASS WATTS 

BACKFLOW PREVENTER 


• For use on either side of pre-rinse hose 

• 3/4” - 14 thread female inlet 

• 3/4” - 14 thread male outlet 

338 


T&S BRASS 

T&S ADD ON FAUCETS PRE-RINSE ASSEMBLIES ACCESSORIES 

B107 PRE-RINSE SPRAY VALVE 

• Spray Valve 

• Used on most T&S pre-rinse units 

• Connects directly to T&S flexible stainless steel 

hose or Roto-Flex handle assembly 

• Designed for heavy use in industrial kitchens 

• Provides high pressure spray when handle is pressed 

• Shuts off when handle is released 

B107A same as B107 except with aerator in place 

of spray face 

B107B same as B107 except with rose spray in place 

of spray face 

907-45 Hold-down Ring 

2856-40 Bonnet Assembly 

B107 SPRAY VALVE 

AND SPRAY VALVE ASSEMBLY 


1 753-25 Push Button 

2 885-45 Bonnet Spring 

3 974-45 Bonnet Washer 

4 1097-45 Packing 

5 974-45 Bonnet Washer 

6 608-25 Bonnet 

7 1040-45 Binding Washer 

8 1084-45 Seat Washer 

9 842-20 Stem 

T&S BRASS 

2859-40 Complete Bonnet 

Assembled Part 

11 907-45 Hold-Down Ring 

12 1120-45 Squeeze Valve Handle 


14 3198-45 Handle Nut 

15 1015-45 Hose Washer 

16 694-40 Short Nipple 

17 19-40 Spray Cup 

18 7861-45 Rubber Ring 

19 1121-45 Spray Face 

20 913-45 Spray Face Screw 


PH 800.458.5593 FX 800.800.4981 

T&S REPLACEMENT HOSES 

T&S BRASS PRE-RINSE HOSES 

Ref. No. Description 

B20H 20” length 





B4409 44” length with vacuum 

• Includes gray handle and all necessary washers 

Parts 

2987-40 Gray handle 

1015-45 Fiber washer (not shown) 

• For use between spring body and adapter 

• For use between handle and valve 

• 9/16” O.D. 

1014-45 Fiber washer (not shown) 

• For use between spring body and hose 

• For use between handle and valve 

• 3/4” O.D. 

B44R T&S BRASS PVC PRE-RINSE HOSE 

• Braided, reinforced PVC covering 

• 44” length 

• Includes gray handle and all necessary washers 

• Durastrong PVC hose dim B = 44” 

• FDA approved 

• Extremely durable 

• Limited 2 year warranty 

• B20R Durastrong PVC hose dim B = 20” 

T&S BRASS 

Stainless Steel Hoses 

B12VB 

12 inch flexible stainless steel hose with vacuum breaker 

B15H 

14 3/4 inch flexible stainless steel hose 

B20H 

20 inch flexible stainless steel hose 

B20HC 

20 inch flexible stainless steel hose, with fan-jet 

B20HM 

20 inch flexible stainless steel hose, 10 per master box 

B20H2A 

20 inch flexible stainless steel hose, less handle 

B26H 


B26HM 


B26H2A 


B28H 


B28HM 


B32H 


B36H 

B44H 

B44HBT 

B44HE 

B44HF 

B44HML 

B44HMS 

B44H2A 

B44H2AE 

B44H2AML 

B44H2AMS 

B44V9 



44 inch stainless steel hose with BSP threads 

44 inch flexible stainless steel hose, Europe 

44 inch pre-rinse hose with Fisher adapter 




44 inch stainless steel hose, Europe, less handle 

44 inch stainless steel hose, less handle, 25 per master box 

44 inch stainless steel hose, less handle, 10 per master box 

44 inch stainless steel hose with vacuum breaker 

340 


T&S BRASS 


B48H 


B50H 


B54H 


B56H 


B60H 


B68H 


B68HML 


B68HMS 


B68H2A 


B72H 


B80H 


B96H 


Note: On all above hoses the handle equals 8” of total length 

PVC Hoses 

B18R 

B20R 

B44R 

B44RE 

B44RF 

B44RMS 

B44R2A 

B68R 

18 inch reinforced PVC hose 

20 inch PVC hose 


44 inch reinforced PVC hose, Europe 

44 inch reinforced PVC hose with Fisher adapter 

44 inch reinforced PVC hose, 10 per master box 

44 inch reinforced PVC hose, less handle 


T&S BRASS 


T&S BRASS 

PH 800.458.5593 FX 800.800.4981 


B100, B950, B106 PRE-RINSE HOSE 


HOSE ADAPTER CHART 

1 B107 Spray valve 

2 1015-45 Washer 

52A 

1/4” IPS female 

3 B44H Stainless steel hose 

4 2853-40 Spray valve 

53A 

3/8” IPS male (Chicago) 

5 5963-40 Spray valve with brush 

054A 


55A 

1/2” IPS male 

56A 


57A 

3/4” IPS male 

58A 


59A 

G.H. female 

172A 

1/4” IPS male (Fisher) 

98A 

Connect two hoses 

1806-25 HOSE ADAPTER 

• Adapter used when connecting two hoses together 

When specified, these adapters will be provided in 

• 3/4” -14 NPT male 

place of the 1/2” IPS male adapter normally furnished. 

T&S BRASS | Heritage Food Service Equipment, Inc. 

B100 

B950 

B106

T&S BRASS 

T&S GLASS FILLERS AND WATER STATIONS 

B1205 T&S BRASS GLASS FILLER 

• Manual water volume control adjustment 

• 3 5/8” projection 


• 3/8” NPT male inlet 

B1200 T&S BRASS WALL MOUNT GLASS FILLER 



• Fits up to a 7/8” hole 

• Lock nut and adjustable flange included 

• 3/8” NPT female inlet 

• 4” projection 

B101A T&S BRASS HOSE TYPE GLASS FILLER 

• Aerator tip 

• 1/2” NPT male hose inlet 

• 36” stainless steel flexible hose 

B16K Valve Repair Kit 

• Contains one of each spring; two of each 

brass washers, packings, seat washers, 

binding washers, fiber washers 

B1231 T&S BRASS WATER STATION 

• 10 1/2” x 12 1/2” overall size 

• 4 1/2” x 10” x 1 1/2” deep drainage area 

• Drainage area is 2 3/4” from riser hole 

• 7/8” diameter hole for glass filler shank 

• Stainless steel 

• 1 1/4” O.D. x 4” long drain tailpiece 

T&S BRASS 


PH 800.458.5593 FX 800.800.4981 

B1210 T&S BRASS GLASS FILLER 



• Hardware used to connect to water 


• 8” height from deck to spout tip 

• 1/2” NPS x 2” shank 


1 752-25 Push Button 

2 894-45 Spring 

3 974-45 Brass Washer 

4 1100-45 Packing 

5 974-45 Brass Washer 

6 826-20 Stem 

7 2334-40 Body 


9 664-20 Seat Holder 

10 1029-45 Binding Washer 

11 623-40 Hex Cap 

12 714-25 Volume Control Nut 

13 834-25 Volume Control Stem 

14 1031-45 Fibre Washer 

15 7198-45 Washer 

T&S BRASS 

17 3090-45 Outlet Tip 

18 3199-45 Lever Screw 

19 1145-45 Lexan Arm 

20 3198-45 Lever Nut 

21 379-20 Nipple 

22 716-20 Locknut 

23 1032-45 Fibre Washer 

24 852-20 Tail Piece 

25 715-20 Coupling Nut 

26 23-40 Flange 

27 713-20 Locknut 

28 741-40 Cube 

29 425-40 Pedestal 

30 24-40 Flange 

31 1033-45 Washer 

32 2954-45 Locknut 

33 1050-45 Washer 

34 853-20 Tailpiece (1/4” IPS) 


36 1050-45 Washer 

37 856-20 Tailpiece (1/4” o.d.) 

38 855-20 Tailpiece (3/8” o.d.) 

39 854-20 Tailpiece (1/2” o.d.) 


344 


T&S BRASS 

B1225 T&S BRASS GLASS 

AND PITCHER FILLER 


on glass filler 




• 6” spout on pitcher filler 

• 4 15/16” glass filler projection 

• 14” height from deck to pitcher filler spout tip 

• 8” height from deck to glass filler spout tip 


1 863-25 Tip 

2 1323-45 Screen 

3 1048-45 Washer 

4 1074-45 O-ring 

5 2877-40 Swing Nozzle 6” 

6 588-25 Adapter 

7 7010-40 Straight Stop Assembly 

8 B1205 Glass Filler 

9 743-40 Pedestal 

10 24-40 Flange 

11 1033-45 Washer 

12 2954-45 Locknut 

13 1028-45 Washer 

T&S BRASS 


PH 800.458.5593 FX 800.800.4981 

HERE IS A PARTIAL LISTING OF MANUFACTURERS THAT WE PROVIDE PARTS FOR 

LINE LIST 

ACORTO 

ACCUTEMP 

ADAMATIC 

ADAMATION 

ADVANCE 

AERVOID 

ALTO-SHAAM 

ALVEY 

AMANA 

AMERICAN DELPHI 

AMERICAN BEST COFFEE 

AMERICAN METAL WARE 

AMERICAN PERMANENT WARE 

AMERICAN DRYER 

AMERICAN DISH SERVICE 

AMERICAN RANGE 

AMF/WYOTT 

ANETS 

ANTUNES 

A.O. SMITH 

ASCO 

ATLAS METAL 

AVTEC 

BAKERS AID 

BAKERS PRIDE 

BALLY 

BARBEQUE KING 

BARMAID 

BASTIAN BLESSING 

BAXTER 

BECA 

BELSHAW 

BERKEL 

BEVERAGE AIR 

BEVLES 

BIRO 

BLAKESLEE 

BLICKMAN 

BLODGETT 

BLOOMFIELD/SILEX 

BOBRICK 

BREWMATIC 

BROWN, W.A. 

BUNN-O-MATIC 

BUS BOY 

BUTCHER BOY 

CADCO 

CADDY CORP 

CAMBRO 

CANNIBAL 

CARTER HOFFMAN 

CECILWARE 

CHAMPION INDUSTRIES 

CHAMPION MACHINERY 

CHICAGO FAUCET 

CHROMALOX 

CISSELL 

CLEVELAND 

COLDELITE 

COMPONENT HARDWARE 

COMSTOCK CASTLE 

CONNOLLY 

COOL CURTAIN 

COOPER INSTRUMENTS 

CORNELIUS 

CRATHCO 

CRES-COR 

CRETORS 

CRIMSCO 

CROWNE 

CRYSTAL TIPS 

CTX 

CUISINART 

CUNO 

CURTRON 

CUTLER INDUSTRIES 

DAHLEN 

DEAN 

DELFIELD 

DESPATCH 

DETECTO 

DITO DEAN 

DOLL FLYNN 

DORMONT HOSES 

DOUGLAS MACHINE 

DUALIT 

DUKE (THERMADUKE) 

DUTCHESS 

DYNAMIC COOKING 

DYNAMIC INTERNATIONAL 

EAGLE/METAL MASTERS 

EDLUND 

ELECTRO FREEZE 

ELLIOTT-WILLIAMS 

EMBER-GLOW 

ENCORE 

EPCO 

ESPRESSO COFFEE 

EUROVEN 

EVERPURE 

EXCEL DRYER 

F.A.S.T. 

FAEMA 

FARBERWARE 

FISH OVEN 

FISHER MFG. 

FOLLETT 

FOOD WARMING EQUIP. 

FRANKE 

FRANKLIN PRODUCTS 

FRYMASTER 

GARLAND 

GAYLORD INDUSTRIES 

GEMINI 

GENERAL ELECTRIC 

GENERAL SLICING 

GLASTENDER 

GLENCO 

GLOBE 

GOLD MEDAL 

GREENHECK 

GRINDMASTER 

GROEN 

HALLDE 

HAMILTON BEACH 

HATCO 

HENNY PENNY 

HOLMAN 

HOSHIZAKI 

HURRICORP 

HUSSMAN FOOD SERVICE 

ICE-O-MATIC 

IDEA-MEDALIE 

IN SINGER 

IN-SINK-ERATOR 

IMPERIAL RANGE 

INTEDGE 

INTERMETRO 

JACKSON 

JADE 

JET SPRAY 

JORDON/FOGEL 

KARMA 

KASON 

KEATING 

KELVINATOR 

KENCO 

KEWANEE 

KING REFRIGERATOR 

KITCHEN AID 

KOCH 

KOLD DRAFT 

LAKESIDE 

LANG 

LE-JO 

LEE MARK METAL 

LEER 

LEGION 

LINCOLN 

LITTON 

LOCHINVAR 

LOCKWOOD 

LOW TEMP INDUSTRIES 

LUCKS 

MAGIKITCH'N 

MANITOWOC 

MANNHART 

MARKET FORGE 

MARS 

MARSHALL AIR 

MASTER DISPOSERS 

MASTER AIR 

MASTER-BILT 

MCCALL/KOLPAK 

MCKIE MFG. 

MEDALIE 

MERCO 

METAL WASH 

MIDDLEBY-MARSHALL 

MIES 

MILE HIGH 

MOFFAT 

MONTAGUE 

MOYER-DIEBEL 

MULTI MIXER/STERLING 

NEMCO 

NIECO 

NORLAKE 

NORRIS 

NOVON 

NU-VU 

NUSSEX 

OLIVER 

OSTER 

OVENWORKS 

PANASONIC 

PASQUINI 

PEERLESS STOVE 

PERLICK 

PITCO/FRIALATOR 

PRAWNTO 

PRECISION 

PRINCE CASTLE 

PUFFER HUBBARD 

QUALHEIM 

RAM CENTER 

RANDELL 

RANKIN-DELUX 

RATIONAL 

REDCO 

RED GOAT 

REMCOR 

REYNOLDS 

ROBOT COUPE 

ROLL A GRILL 

RONDO 

ROSS TEMP 

ROTISOL 

ROUNDUP 

ROYALTON 

SAGE 

SALVAJOR 

SANI-SERV 

SAVORY 

SCOTSMAN 

SECO PRODUCTS 

SECO ENGINEERING 

SERVER PRODUCTS 

SERVOLIFT 

SET-N-SERV 

SHARP 

SHELCON 

SHELLEY 

SICO 

SILVERKING 

SITCO 

SMOKAROMA 

SOMAT 

SOUTHBEND RANGE 

STANLEY KNIGHT 

STAR 

STEPHAN MACHINERY 

STERO 

SUNKIST 

SWEEDEN FREEZER 

T&S BRASS & BRONZE 

TAYLOR FREEZER 

TAYLOR THERMOMETERS 

TECHNI-BREW 

THERMAL ENGINEERING CORP. 

THERMODYNE 

TOASTMASTER 

TOASTWELL 

TOLEDO 

TOMLINSON 

TRAULSEN 

TRAYCON 

TRIUMPH 

TRUE REFRIGERATORS 

TURBOCHEF 

TURBO-VAC 

U.S. RANGE 

UNIVEX 

URSCHELL 

USECO 

VARIMIXER 

VICTORY/RAETONE 

VITAMIX 

VOGT 

VOLLRATH 

VULCAN HART 

WARING 

WASTE KING 

WELLS 

WILBUR CURTIS 

WILDER 

WINSTON 

WITTCO 

WOLF RANGE 

WORLD DRYER 

WYOTT 

& Many More! 

346 

Heritage Food Service Equipment 800.458.5593

T&S BRASS 

T&S PARTS REEL-KLEEN RETRACTABLE HOSE REEL AND SPRAY PRE-RINSE ACCESSORIES 

B1403 T&S BRASS REEL-KLEEN OPEN MODEL 

• 35 ft. hose of 3/8” ID 

• Regular Repair kit 9562-45 

• 3/8” NPT female inlet 

• 5” x 8” mounting plate screw centers 

• Includes spray valve 

• 14 1/4” reel diameter 


• Adjustable hose bumper 

• Silver metallic cover 

• Hose is pulled out to desired length & maintains position until slight tug 

causes it to retract automatically 

• Multi-fit bracket for wall, ceiling or under counter mounting 

Parts 

3364-40 35’ hose 

2881-40 Gray handle 

B107 

Spray valve 


1 2495-45 Screw 

2 2456-45 Lock Washer 

3 2496-45 Guide Arm 

4 2483-45 Guide Assembly 

5 2506-45 Bolt 


7 2505-45 Screw 


9 2497-45 Stand Assembly 

10 2446-45 Ratchet Spring 

112504-45 Ratchet Lever 

12 2447-45 Retaining Ring 

13 2463-45 Set Screw 

14 2498-45 Nut 

15 2448-45 Lock Nut 

16 2469-45 Mainspring, Cup & Ratchet Assembly 

172499-45 Hub, Spring 

18 2502-45 Drum Assembly 

19 2500-45 Screw 

20 2458-45 Washer 

21 2501-45 Clamp 

22 2457-45 Lock Nut 


24 2453-45 Washer 

25 2468-45 Mainshaft 

26 2481-45 Cotter Pin 

27 1061-45 O Ring 

28 1061-45 O RIng 

29 B107 Spray Valve Assembly 

30 2881-40 Handle 

31 3364-40 Hose Assembly 

32 1427-45 Hose Stop Assembly 

33 2467-45 Swivel 

34 2448-45 Lock Nut 

35 2453-45 Washer 


37 2503-45 Pipe Plug 

T&S BRASS 


PH 800.458.5593 FX 800.800.4981 

T&S FAUCETS 

T&S BRASS 1100 SERIES 

4” CENTER DECK MOUNT FAUCETS 

Item No. 

B1110 

B1112 

B1113 

B1114 

B1141 

Description 

6” spout 

8” spout 

10” spout 

12” spout 

Gooseneck spout 

B290 T&S BRASS HIGH VOLUME 

WALL MOUNT FAUCET 

• 3/4” NPT female street elbow inlets 


• For use where water must be delivered rapidly 

• 12” spout 

• 8” centers 

T&S BRASS 1100 SERIES 8” CENTER 

DECK MOUNT FAUCETS 

Item No. 

Description 

B1120 

6” spout 

B1121 

8” spout 

B1122 

10” spout 

B1123 

12” spout 

B1142 


• 1/2” NPS x 1” shanks 


• 1/2” NPS X 1” shanks 



3 1/2” CENTER WALL MOUNT FAUCETS 


8” CENTER WALL MOUNT FAUCETS 

T&S BRASS 200 SERIES 4” 

DECK MOUNT FAUCETS 

T&S BRASS 

Item No. 

Description 

B1106 

8” spout 

B1108 

12” spout 

• 1/2” NPS x 1” shanks 


Item No. 

Description 

B1125 

6” spout 

B1126 

8” spout 

B1127 

10” spout 

B1128 

12” spout 

B1125-63X 14” spout 

B1125-65X 18” spout 

• 1/2” X 1” shanks 


Item No. 

Description 

B222 

6” spout 

B220LNX61X 10” spout 

B221 

12” spout 

B321 


• 1/2” NPT female inlets 


348 


T&S BRASS 

T&S FAUCETS AND ACCESSORIES 

B665-BSTR T&S BRASS WALL MOUNT 

SERVICE SINK FAUCET 

• Vacuum breaker spout 

• 7” rigid spout with hose thread and pail hook 



• Chrome plated rough brass 

B350-4 T&S BRASS WALL MOUNT 

LAB SINK FAUCET 

• 4” wrist blades 


• Rose spray outlet 



B831 T&S BRASS DECK MOUNT SLOW 

B837 SLOW CLOSING LAVATORY FAUCET 


• 1/2” NPS X 1 1/2” shank 

• 1/2” inlet adapter nuts 


B865-4 T&S BRASS DECK MOUNT 

LAB SINK FAUCET 

B892 T&S BRASS DECK MOUNT 

LAVATORY FAUCET 



• 1/2” NPS x 2 1/4” shank 


• 5” height from deck to spout tip 


B834 T&S BRASS DECK MOUNT SLOW 

CLOSING LAVATORY FAUCET WITH 

RIGID GOOSENECK SPOUT 


• Eterna series 


• 1/2” NPS x 1 1/2” shanks 



• Rose spray outlet 

• Adjustable 6 1/2” to 8” centers 



• 9 3/4” overall height 

• 4 3/4” height from deck to spout 


T&S BRASS 

T&S BRASS SLOW CLOSING 

STEM ASSEMBLIES 

B969 T&S BRASS VACUUM BREAKER 1/2” 

• For use on T&S Brass service sink faucet 

• Fits all ” Eterna” models 

• 2880-40 

• 2879-40 


PH 800.458.5593 FX 800.800.4981 

T&S FAUCETS PARTS AND ACCESSORIES 

T&S Brass produces two series of faucet stem 

assemblies. The “Eterna” series has two nuts on the 

stem. The 1100 series has one nut on the stem. 

T&S BRASS 

T&S BRASS “ETERNA” SERIES FAUCETS 

STEM ASSEMBLY PARTS 


1 922-45 Screw 

2 1660-45 Cold Index Button 

2 1660-45 Hot Index Button 

3 1636-45 Cold Handle Assembly 

3 1637-45 Hot Handle Assembly 

4 718-25 Packing Nut 

5 1098-45 Packing 

6 607-40 Bonnet 

7 2601-45 Bonnet Gasket 

8 812-25 Cold Stem Assembly 

8 811-25 Hot Stem Assembly 


10 933-45 Seat Washer Seat 

11 789-20 Cold Insert 

11 788-20 Hot Insert 

12 1022-45 Seat Gasket 

13 1019-45 Washer 

14 2893-40 Coupling flange 

• 2713-40 “ Eterna” Cold Stem 

Assembly 

• 2714-40 “ Eterna” Hot Stem Assembly 

T&S SPOUTS 

Item No. 

Description 

2877-40 6” spout 

60X 

8” spout 

61X 

10” spout 

62X 

12” spout 

63X 

14” spout 

65X 

18” spout 

68X 

18” double-jointed spout 

178A 

18” double-jointed spout 

with shut-off on nozzle 

120X 

Rigid gooseneck spout 

2981-40 Swivel gooseneck spout 

Spout Parts (not shown) 

1074-45 Spout o-ring 

1028-45 Spout washer 

T&S BRASS REPAIR KIT FOR “ETERNA” FAUCETS 

B6K 

Contains one each of cold spindle, hot spindle, removable 

hot insert, removable cold insert; six each of seat screws, 

teflon packings, twelve each of seat gaskets, bonnet gaskets; 

twenty-four each of seat washers. 

350 


T&S BRASS 

PARTS FOR T&S BRASS FAUCETS 

FAUCET INLET NIPPLE AND LOCK NUT 

B425 

• Converts faucets from female to male inlets 

• 1/2” NPS x 2” long 

• Brass 

5. 

T&S BRASS SPOUT ADAPTORS 


1. B412 Spout Adapter 

• 3/8” NPT rigid spout to swing spout 


• Swing spout 3/8” NPT rigid spout 


• Converts to 3/8” NPT rigid gooseneck 

to a swing spout 

SPOUT ACCESSORIES 


1. B-PT Stream Tip 

2. BGFE Hose Adapter 

3. B-199-3 Aerator 

• fits spout with male thread 

4. B-199-2 Aerator 

• fits spout with 3/8” NPT female thread 

6. 

T&S BRASS HANDLES 


5. 2521-45 Cross Handle 

6. BL-5500-01 4” wrist blade 

6. BL-5500-03 6” wrist blade 

• Fits either “Eterna” or “1100” series faucet stems 

• Sold individually 

T&S BRASS 

T&S BRASS “1100” SERIES FAUCET REPAIR KIT 

B20K 

Contains one each of cold spindle, hot spindle, removable 

hot insert, removable cold insert; six each of seat screws, 

teflon packings, twelve each of seat gaskets, bonnet gaskets; 

twenty-four each of seat washers.

t&s brass & bronze - Heritage Food Service Equipment, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?