Adobe PDF - California Department of Housing and Community ...

OCCUPATIONAL LICENSING - REGULATIONS
agency or a DOJ-certified fingerprint roller. Additional fingerprinting may be required if the submitted fingerprints are
rejected by DOJ or the Federal Bureau of Investigation.
(5) Two (2) full facial photographs of each person designated in Part A as participating in the direction, control or
management of the manufacturing or sales operations of the business, minimum size 1 1/4" x 1", taken from a
maximum distance of six (6) feet.
(6) Business photographs: One (1) photograph showing the manufacturing area and one (1) photograph of the
exterior of the office for each established place of business.
(7) A list of model or brand names to be manufactured at each established place of business.
(8) An explanation of the serial numbers configuration to be assigned to MH-Units or commercial modulars.
(9) The original manufacturer license application fee specified in Section 5040 of this subchapter for each
established place of business.
(e) Distributor License. The following forms and items are required to be submitted by applicants for a distributor's
license:
(1) Application for MH-Unit/Commercial Modular Manufacturers, Distributors, and Dealers, Part A who is
designated as participating in the direction, control or management of the manufacturing or sales operations of the
business, form HCD OL 12 (Rev. 06/09), which is incorporated by reference.
(2) Application for MH-Unit/Commercial Modular Manufacturers, Distributors, Dealers and Salespersons, Part B,
form HCD OL 29 (Rev. 06/09), which is incorporated by reference, for each person designated in Part A as
participating in the direction, control or management of the manufacturing or sales operations of the business.
(3) Application for MH-Unit/Commercial Modular Manufacturers, Distributors and Dealers, Part C, form HCD OL 21
(Rev. 06/09), which is incorporated by reference, for each established place of business.
(4) For each person designated in Part A as participating in the direction, control or management of the
manufacturing or sales operations of the business, fingerprints must be submitted through the Live Scan fingerprint
process. Unless exempted by DOJ, applicants shall provide a properly completed and legible copy of a Request for
Live Scan Service, form HCD OL 8016 (New 11/05), which is incorporated by reference, or the equivalent form
provided by DOJ. The form HCD OL 8016 or DOJ equivalent form must provide evidence that the fingerprints have
been submitted to DOJ and that the department is properly listed as the agency to receive any criminal history
information. Applicants applying for an exemption from the Live Scan process must submit their exemption requests
through the department on the forms prescribed by DOJ. Fingerprints must be processed by a law enforcement
agency or a DOJ-certified fingerprint roller. Additional fingerprinting may be required if the submitted fingerprints are
rejected by DOJ or the Federal Bureau of Investigation.
(5) Two (2) full facial photographs of each person designated in Part A as participating in the direction, control or
management of the manufacturing or sales operations of the business, minimum size 1 1/4" x 1", taken from a
maximum distance of six (6) feet.
(6) Business photographs: One (1) photograph showing the exterior of the office for each established place of
business.
(7) A list of the name, address, brands and models of each manufacturer whose line will be distributed.
(8) An explanation of the manufacturer's serial numbers configuration assigned to MH-Units or commercial
modulars.
(9) The original distributor license application fee specified in Section 5040 of this subchapter for each established
place of business.
(f) Dealer License. The following forms and items are required to be submitted by applicants for a dealer's license:
(1) Application for MH-Unit/Commercial Modular Manufacturers, Distributors, and Dealers, Part A, form HCD OL 12
(Rev. 06/09), which is incorporated by reference.
(2) Application for MH-Unit/Commercial Modular Manufacturers, Distributors, Dealers and Salespersons, Part B,
form HCD OL 29 (Rev. 06/09), which is incorporated by reference, for each person designated in Part A as
participating in the direction, control or management of the sales operations of the business. Manufactured home
dealer applicants using a bachelor’s degree from an accredited United States (U.S.) college or university to qualify for
the license shall provide acceptable evidence to the department (e.g., certified transcripts) that the applicant earned
the degree and the degree is from an accredited college or university, such as those listed by the U.S. Department of
Education (USDE), the California Department of Education (CDE) or one of the accrediting agencies recognized by
the USDE or CDE. Applicants using a foreign or non-English college or university degree shall have the degree
translated into English. The applicant shall submit verification that the degree is from an accredited college or
university and is equivalent to a bachelor’s degree from an accredited U.S. college or university. Applicants may
obtain a degree translation and/or verification from any U.S. accredited college or university, a business approved for
that purpose by the USDE, CDE, or the California Department of Real Estate. Translation and/or verification criteria
from other government agencies, not identified in this section may be acceptable. For translation only, the consul of
the country where the foreign degree was earned or by a translation bureau may be acceptable. Two (2) or more
associate degrees are not acceptable to satisfy the education criteria, however a graduate degree from an accredited
college or university may be acceptable.
(3) Application for MH-Unit/Commercial Modular Manufacturers, Distributors and Dealers, Part C, form HCD OL 21
(Rev. 06/09), which is incorporated by reference, for each established place of business.
(4) Application for MH-Unit/Commercial Modular Dealers, Part D, form HCD OL 50 (Rev. 06/09), which is
incorporated by reference.
(5) For each person designated in Part A as participating in the direction, control or management of the
90