Tool Set

Pullers / Extractors / Drills
Ingenious Tools
Universal Ball Joint Puller
For removing the ball joint pivots
of pitman arms, steering tie rods,
steering knuckles, stabilizers, etc.
Great clamping range due
to continuous vertical
adjustment and turn-over
of the lower part
Span of jaw 18–23 mm
(1779-1)
Sturdy execution and deep
location groove enabling
a safe and universal
application e.g. for light
commercial vehicles (1779-3)
Special steel
CU
Universal Ball Joint Puller
For removing the ball joint pivots of steering tie rods, stabilizers, etc.
on almost all vehicle types
1779-2:
Clamping range in 2 stages
stage 1: up to 30 mm / stage 2: up to 50 mm
For FORD, BMW, VOLVO, TOYOTA,
OPEL, VW-AUDI, RENAULT
1779-22:
50 – 80 mm
Fork depth: 35 mm
C
1 Y 1 6
EAN-No.
4000896+
1779-1 65 23 0.7 135974
1779-3 85 32 2.5 135998
1 Y 1 6
EAN-No.
4000896+
1779-2 12 – 50 20 1.4 135981
1779-22 50 – 80 20 1.4 141654
Ball Joint Puller
For removing the ball joint pivots of pitman arms, steering tie rods,
stabilizers, etc. on heavy commercial vehicles
Sturdy execution
and deep location
groove enabling a
safe and universal
application
Special steel
Surface galvanized,
yellow passivated
(free from Cr 6)
German registered
utility model
CU
Ball Joint Puller
For removing ball joint pivots on vehicles with multi-link axle
e.g. AUDI A6 and A8, VW Passat, Golf
Mechanical
Special steel
Surface galvanized,
yellow passivated
(free from Cr 6)
German
registered
utility model
C
1 Y 1 6
EAN-No.
4000896+
1790-3 85 40 3 145454
1 Y 1 6
EAN-No.
4000896+
1790-4 65 30 2 145447
Drill/Screwdriver Bit Set
Operating tools for drilling and screwing –
all in one box
Short style – suitable for areas
with restricted access
Bit holder with clamping spring
allows fast tool changing
High-quality HSS drill bits
Contents:
1 Holder for Bits
h D 6.3 = 1 ⁄4” g C 6.3
6 Drill-Bits HSS
3 4 5 6 8 10 mm
12 Screwdriver Bits:
K 0.6 x 4.5 1.0 x 6.0 mm
L PH 1 PH 2 M PZ 1 PZ 2
N T 10 T 15 T 20 T 25 T 30 T 40
19 pieces, in sturdy
plastic box
Tap and Die Set
21 pieces, in plastic box
with PUR foam insert
For problem-free rethreading even in areas
with restricted access
To be used with
reversible ratchet
Heavy-duty thread
cutter made of HSS steel
Contents:
7 Taps for female threads
M 3 – M 12
7 Dies for male threads
M 3 – M 12
2 Chucks g 6.3 = 1 ⁄4”
g 8 = 5 ⁄16”
2 Die Stocks j drive 6.3 = 1 ⁄4”
j drive 10 = 3 ⁄8”
1 Hex Head Wrench
2 Adapters for manual operation
2241/19 EAN-No. 4000896141401 849 EAN-No. 4000896035984
The HAZET Online Catalogue – a service for 10 years! www.hazet.com
21