ACCESSoRIES & SPECIAL tooLS - Harley-Davidson

accessories & SPECIAL TOOLS
FINISH LINE OR
FINISHING TOUCH
Screamin’ Eagle ® Pro can supply
complete race-use engine kits
designed to get you to the finish
line, performance-proven SYN3 ®
Synthetic Lubricant to fight
corrosion and wear, and the
specialized tools that simplify
working on your engine.
87

a. Screamin’ Eagle ® SYN3 ® full Synthetic
Motorcycle Lubricant, SAE 20W50
TESTED-CERTIFIED for use in Harley-Davidson ® engine,
primary chaincase and transmission applications, Screamin’
Eagle ® SYN3 ® Full Synthetic Motorcycle Lubricant makes
changing and topping-off fluids a simple one-product
process. Developed with a proprietary three synthetic basestock
formula, Screamin’ Eagle SYN3 Lubricant is formulated
to provide for long-term protection and engine cleanliness
requirements, and to provide superior high-temperature
protection for high-output engines. SYN3 Lubricant is formulated
to maintain the coefficient of friction for proper clutch
operation and to provide the proper lubrication to the primary
chain drive. In addition, SYN3 Lubricant is designed to
provide the correct lubricity for the anti-wear requirements
of transmission gears and for improved seal protection. This
formula is approved by Harley-Davidson for use in all stages
of engine life and is not detrimental to the break-in stage
of engines.
Formulated for use in Harley-Davidson Engines,
Transmissions and the following Primary Chaincase applications:
’71-later XL, ’83-’84 XR1000, and ’84-later Big Twin
models with wet-type diaphragm spring clutch.
99824-03/00QT Quart. $10.49
99824-03/00GL Gallon. $41.95
B. Screamin’ Eagle Synthetic Blend Motorcycle
Engine Oil – SAE 20W50
Screamin’ Eagle Synthetic Blend 20W50 Motorcycle Oil
provides all the quality and protection of HD 360 mineralbased
oil, with the added benefit of improved high-temperature
oil stability, improved oil flow at cold engine start-up, and
improved viscosity under high engine load. Feel added confidence
knowing that Screamin’ Eagle Synthetic Blend Motor
Oil was tested to Harley-Davidson Motor Company's rigorous
standars and certified for use in your Harley-Davidson
engine cavity. This oil is approved for use in all stages of
engine life, including during engine break-in.
99813-09 Quart. $8.49
Formulated for use in Harley-Davidson engine cavity only.
a. Screamin’ Eagle SYN3 full Synthetic Motorcycle Lubricant, SAE 20W50
C. Screamin’ Eagle Fork Oil
Performance
A heavier blended oil that provides extra damping in performance
applications.
99881-87 16-oz. Bottle. $5.95
Racing
Designed and blended for the severe conditions on the race
track. Not intended for street-use.
99909-93R 16-oz. Bottle. $6.95
D. Screamin’ Eagle Assembly Lube
Screamin’ Eagle Assembly Lube provides superior protection
during installation or servicing of internal engine components.
Formulated with a high tackifier, this lubricant clings
to parts and provides excellent start-up and break-in protection.
It provides excellent corrosion resistance, and it won’t
drip off like common oil when you set coated parts aside to
work on the rest of the engine. That’s why we use it on all of
our test engines. Don’t start your re-built or serviced engine
without it. Recommended applications: cams, gears, crankpins,
piston wrist pins, oil pumps, valve guides, rocker arm
and push rod tips and roller tappet wheels.
94971-09 $9.95
B. Screamin’ Eagle Synthetic Blend Motorcycle Engine Oil – SAE 20W50
Notice: Suggested retail prices are subject to change. Please
see harley-davidson.com for the most current suggested retail
prices on any product listed in this catalog. Actual retail prices
may vary.
88 Accessories
Oil & Lube
C. Screamin’ Eagle Fork Oil D. Screamin’ Eagle Assembly Lube

e. Code Master Service Code Reader
Be prepared when you visit your dealer for service. Diagnostic
Service Code Reader easily retrieves trouble codes from your
vehicle’s computer to diagnose problems. The pocket-sized
diagnostic code reader simply plugs into your bike’s vehicle
port, and automatically connects to the onboard computer. It
reads the Diagnostic Trouble Codes (DTC) and displays the
DTC description on a bright LCD screen. The Code Master
allows you to clear codes with the touch of a button, and also
lets you check the current calibration ID for your motorcycle.
The Code Reader is powered by your bike when connected.
Kit includes palm-sized reader, J1850 connection cord, and
instructions.
32312-10 $149.95
For use on ’02-’11 VRSC, ’07-’11 XL and XR, ’02-’11 Dyna ® ,
’01-’10 Softail ® , and ’02-’11 Touring models equipped with
J1850 protocol On-Board Diagnostics information plug.
e. Code Master Service Code Reader e. Code Master Service Code Reader
f. Screamin’ Eagle ® Exhaust Sampling Adapter
Installation Tool
This tool is used to permit the connection of an air-to-fuel
ratio “sniffer” to the exhaust header pipes for exhaust gas
evaluation. Traditionally, the “sniffer” tool is inserted into the
muffler to collect a sample for analyzing the engine’s operating
air-to-fuel ratio, but if the exhaust system is equipped
with a catalyst, the sample collected at the tail pipe will not
be accurate. This tool allows the exhaust gas sample to be
taken ahead of the catalyst, resulting in accurate air-to-fuel
ratio values.
f. Screamin’ Eagle Exhaust Sampling
Adapter Installation Tool (Shown
with Sample Rivnut and Sealing Plug)
g. Screamin’ Eagle Automatic Compression
Release Removal Tool
Tool allows technician to drill a hole into the header pipe near
the head and install a special threaded plug that allows the
sniffer pipe to be temporarily installed during dyno testing.
Once testing is complete the sniffer is removed and hole is
sealed with a standard threaded hex plug and hidden under
the heat shield. The tool is ideal for use with ’10-later Touring
models. Kit includes 40 Rivnuts and 40 sealing plugs.
14900008 $634.95
For use during Dyno testing.
Also available:
Screamin’ Eagle Exhaust Sampling Adapter
and Adapter Plug Hardware Kit
Kit includes 40 Rivnuts and 40 sealing plugs.
14900011 $34.95
For use with Exhaust Sampling Adapter Tool P/N 14900008.
g. Screamin’ Eagle Automatic Compression
Release Removal Tool
Socket designed for removal and installation of Harley-
Davidson ® Automatic Compression Release solenoid.
94048-09 $39.95
For all Harley-Davidson models equipped with Screamin’
Eagle Automatic Compression Release.
h. Screamin’ Eagle O2 Sensor Socket
This cut-away socket is designed to clear the wire lead and
simplify the removal or installation of the oxygen sensor on
closed loop fuel injected models. Manufactured to withstand
the installation torque requirements, the socket features a
3/8" drive receiver.
94136-09 $35.95
For use on ’06-later EFI models (except ’10-later Touring
and Trike) with 02 sensors.
93980-10 $19.95
For use on ’10-later Touring and Trike models with
O2 sensors.
h. Screamin’ Eagle o2 Sensor
Socket (94136-09 Shown)
h. Screamin’ Eagle o2 Sensor
Socket (93980-10 Shown)
Accessories 89
Special Tools

a. Screamin’ Eagle ® Case Boring Tool
The Screamin’ Eagle Case Boring Tool takes the guesswork
out of boring Twin Cam engine cases to accept oversize cylinders.
Designed to be used with a heavy-duty 15" drill press
or milling machine, the fixture holds and aligns the cases for
accurate machining. Ideal for installing a Twin Cam 110 cubic
inch Stage Kit or a race-use bigger-bore 113 cubic inch stroker
cylinders.
94419-06 $1,398.95
For use on ’99-later Twin Cam engines.
b. Screamin’ Eagle Timken ® Bearing Tool
Timken tool allows you to convert ’03-later Twin Cam models
with a factory-installed output shaft roller bearing to a
Timken-tapered bearing. Tool allows technician to press in
a bearing sleeve without having to do a precision crankcase
boring operation. Sleeve presses in and is retained
with screws. Timken bearing races are then pressed into
the sleeve. Timken Bearing Sleeve P/N 34822-08 is sold
separately.
34823-08 $749.95
For use on ’03-later Twin Cam-equipped models.
c. Screamin’ Eagle ® Automatic Compression
Release Tool
This kit provides all the fixtures and tools necessary for a
machinist to install Automatic Compression Release (ACR)
valves onto stock or Screamin’ Eagle Performance cylinder
heads. Complete installation requires separate purchase of
Automatic Compression Release Kit P/N 28861-07A and
model-specific Wiring Harness P/N 70623-06 or 70623-08.
94648-08 $949.95
For machining of Original Equipment cylinder heads or
Screamin’ Eagle Performance Heads P/N 16952-08,
16953-08, 16952-99C and 16953-99C on ’99-later
Twin Cam-equipped models.
d. Screamin’ Eagle Mechanical Compression
Release Machining Fixture
Simplify the addition of mechanical compression releases
to your stock Twin Cam cylinder heads. The fixture allows
precision accuracy for the drilling, spot facing, and tapping
necessary to install Compression Release Kit P/N 32076-04
(sold separately). Fixture accommodates the machining of
the front and rear heads, even when the valves are already in
place, and when the process is complete, the Compression
Release Kit P/N 32076-04 threads in place.
94638-08 $249.95
For use on ’99-later Twin Cam models.
E. Screamin’ Eagle Engine Case Support Blocks
This innovative tool is designed to protect the left engine
case while servicing the inner balancer bearings or performing
other general engine work. These blocks attach to the
outer side of the engine case underneath the balancer bearing
pads surface. The blocks are made of aluminum and have
inserted Delrin ® pads that rest against the case to prevent
marring. The blocks properly support the case, keeping it
on a level plane when using a press for bearing service work.
14900004 $74.95
For use on ’00-later Softail ® engines.
F. Screamin’ Eagle Crankcase Bearing Install/
Removal Tool
This heavy duty tool is designed to provide adequate support
for the crankcase and appropriate guidance to the bearing
while using a press to remove and install crankcase bearings.
Precision-made of Delrin ® material to prevent marring;
this tool can be used on pinion and sprocket side bearings
on Dyna ® and Touring models, and sprocket side bearings
on Softail models.
14900014 $129.95
For use on ’03-later Twin Cam engines.
a. Screamin’ Eagle Case Boring Tool
c. Screamin’ Eagle Automatic
Compression Release Tool
b. Screamin’ Eagle Timken Bearing Tool
d. Screamin’ Eagle Mechanical
Compression Release Machining
Fixture
90 Accessories
Special Tools
E. Screamin’ Eagle Engine Case
Support Blocks
F. Screamin’ Eagle Crankcase Bearing
Install/Removal Tool

g. Screamin’ Eagle Camshaft Removal
and Installation Tool
g. Screamin’ Eagle Camshaft Removal
and Installation Tool
g. Screamin’ Eagle ® Camshaft Removal and
Installation Tool
This multi-function tool is designed to remove and replace
the front and rear camshafts and the ball bearings of a Twin
Cam 88 ® -based engine. It precisely aligns the camshaft to
ensure smooth press-in and press-out of the support plate.
94085-09 $127.95
For use on ’99-’05 Dyna ® , ’00-’06 Softail ® and
’99-’06 Touring models.
h. Screamin’ Eagle Inner Cam Bearing
Removal Tool
This precision tool simplifies the removal of the inner cam
bearing, and reduces the risk of damaging the crankcase.
Tool is also designed to keep the pin rollers from accidentally
falling into the crankcase.
94078-09 $120.95
For use on ’99-’05 Dyna, ’00-’06 Softail and
’99-’06 Touring models.
94144-09 $120.95
For use on ’06-later Dyna, and ’07-later Softail and
Touring models.
i. Screamin’ Eagle Inner Cam Bearing
Installation Tool
This precision tool is designed to ease the installation of the
inner cam bearing into the bore. Manufactured from hardened
tool steel, this precision tool perfectly positions the
bearings and prevents the pin bearings from falling into the
engine case.
94107-09A $179.95
For use on ’99-later Twin Cam engines featuring both earlyand
late-model inner cam bearing designs.
j. Screamin’ Eagle Mainshaft Bearing Race
Removal and Installation Tool
This tool is designed to easily remove and install the bearing
race on the transmission mainshaft. Manufactured
from hardened tool steel, the tool operates with standard
wrenches.
94129-09 $195.95
For use on ’84-later Evolution ® 1340 and Twin Camequipped
models with five-speed transmissions.
h. Screamin’ Eagle Inner Cam Bearing
Removal Tool
h. Screamin’ Eagle Inner Cam Bearing
Removal Tool
i. Screamin’ Eagle Inner Cam Bearing
Installation Tool
j. Screamin’ Eagle Mainshaft Bearing Race
Removal and Installation Tool
Accessories 91
Special Tools

A. Screamin’ Eagle ® Twin Cam Chain
Tensioner Tool
A must for any camshaft work, this tool lets you easily
assemble and disassemble cams by unloading the pressure
on the primary and secondary chain tensioners on early Twin
Cam models.
94075-09 $39.95
For use on ’99-’05 Dyna ® , ’00-’06 Softail ® and ’99-’06
Touring models.
B. Screamin’ Eagle Primary Drive Locking Tool
This tool is designed to keep the primary drive system from
rotating during the installation and removal of the compensator
sprocket nut or the clutch hub nut. The tool is easily
inserted into the primary drive system and wedges in place
to restrict movement without damaging the sprocket teeth.
94102-09 $34.95
For use on ’07-later Touring models.
14900002 $34.95
For use on ’06-later Dyna and ’07-later Softail models.
C. Screamin’ Eagle Mainshaft Sprocket and
Pully Locknut Removal and Installation Tool
This extended-length socket is designed to fit over the long
transmission shaft simplifying the removal and installation of
the large transmission pulley locknuts. Manufactured from
hardened tool steel, the socket includes a stabilizer spacer
that keeps the threaded shaft end from hitting the socket
during removal and installation.
94137-09 $149.95
For use on ’84-later Evolution ® 1340-equipped models, and
’99-’05 Dyna, ’00-’06 Softail and ’99-’06 Touring models.
94141-10 $149.95
For use on ’06-later Dyna and ’07-later Softail and Touring
models.
D. Screamin’ Eagle Cam Locking Tool
Tool allows a technician to effectively lock the camshaft
and crankshaft sprockets to properly remove, replace, and
torque the sprocket bolts. Tool is made from non-marring
Delrin ® material to protect the crank and cam sprocket teeth
and surface finishes.
94076-09 Roller Chain. $34.95
For use on ’06-later Dyna ® , ’07-later Softail ® and
’07-later Touring models.
94077-09 Silent Chain. $34.95
For use on ’99-’05 Dyna, ’00-’06 Softail and
’99-’06 Touring models.
A. Screamin’ Eagle Twin Cam Chain
Tensioner Tool
A. Screamin’ Eagle Twin Cam Chain
Tensioner Tool
B. Screamin’ Eagle Primary Drive
Locking Tool
C. Screamin’ Eagle Mainshaft
Sprocket and Pully Locknut Removal
and Installation Tool
92 Accessories
Special Tools
D. Screamin’ Eagle Cam Locking Tool –
Silent Chain
D. Screamin’ Eagle Cam Locking Tool –
roller Chain

E. Screamin’ Eagle FINAL DRIVE PULLEY
LOCKING TooL
F. Screamin’ Eagle Push Rod Tube Installation
and Removal Tool
E. Screamin’ Eagle ® Final Drive Pulley
Locking Tool
Locks the engine’s final drive sprocket so that you can
loosen the pulley nut. Pulley Locking Tool also eliminates any
damage to pulley. Use with Mainshaft Sprocket and Pulley
Locknut Removal Tool P/N 94137-09 and 94141-10.
14900003 $139.95
For use on ’80-later belt-drive Big Twin models.
f. Screamin’ Eagle Push Rod Tube Installation
and Removal Tool
This handy tool simplifies the removal and installation of
the retaining clip on Harley-Davidson ® collapsible push rod
tubes. Convenient design reduces the risk of scratched
engine parts and hands, and the quality composite handles
provide a sure and solid grip.
94086-09 $39.95
For use on Harley-Davidson collapsible push rod tubes.
G. Screamin’ Eagle Torque Angle Gauge
This tool allows you to use the same precise assembly techniques
used at the factory. Many fasteners on the engine
should be tightened to an initial torque value and then turned
an additional prescribed angle to ensure that the fastener
has the appropriate amount of “stretch” and attains the
required clamp load. Tightening fasteners by torque specification
alone can result in insufficient or over-tightening
because of nicked or dirty threads. The easy-to-read dial face
provides precise measurement, and the 3/8" drive makes
this tool compact and easy to use in most applications.
94147-10 $39.95
For use on applications where torque angle measurements
are specified during assembly, i.e. head bolts.
H. Screamin’ Eagle Magnetic Lifter Holders
Simplify engine cam swaps. During rebuild, the lifters drop
down onto the cams lobes, making it difficult to remove or
install the cams. This clever tool uses strong magnets to hold
the lifters up and out of the way while removing or installing
the cams. Manufactured from 6061-T6 billet aluminum,
these handy tools are orange anodized to make them easy to
find in a crowded tool chest. Sold in pairs, a set allows you to
service both front and rear lifters at the same time.
93979-10 $19.95
For use on ’99-later Twin Cam models.
I. Engine Assembly/Display Stand
This dual purpose engine stand provides support to the Twin
Cam Alpha (Dyna ® /Touring) crankcase during engine teardown
and assembly, and also provides a means to display
the completed engine. Heavy duty steel stand can be used
free-standing on its non-marking rubber feet, or bolted to
the bench for added stability. Stand features a laser-cut Bar
& Shield logo.
94845-10 $59.95
For use on Twin Cam Dyna ® and Touring engines.
G. Screamin’ Eagle Torque Angle Gauge H. Screamin’ Eagle Magnetic Lifter Holders
I. Engine Assembly/Display Stand
(shown with Optional Magnetic
Hardware Tray)
I. Engine Assembly/Display Stand
(shown with Optional Magnetic
Hardware Tray)
Accessories 93
Special Tools

A. Screamin’ Eagle ® Rocker Box Bolt
Ratcheting Wrench
This high-quality wrench simplifies working on the rocker
box while the engine is mounted in the motorcycle’s frame.
This tool features a low-profile design to allow access to
the tight spaces between the frame and the engine. The
wrench has a long handle for increased reach, a replaceable
bit and a reversible ratcheting action so the socket head
cap screw can be ratcheted in or out. The comfortable soft
vinyl grip with Screamin’ Eagle logo protects the engine from
scratches.
94057-09 $34.95
For use on all Harley-Davidson ® Big Twin rocker box covers.
B. Screamin’ Eagle Lower Rocker Box Wrench
This quality long-handled wrench is designed to simplify
installation and removal of the lower rocker box on Twin
Cam engines. The special 7/16" socket is shaped to reach
these confined areas. The comfortable soft vinyl grip with
Screamin’ Eagle logo protects the engine from scratches.
94074-09 $25.95
For use on Twin Cam engines.
C. Screamin’ Eagle Intake Manifold Wrench
This reversible ratcheting box wrench simplifies and speeds
up the installation and removal of the intake manifold socket
head cap screws used on Big Twin engines. The comfortable
soft vinyl grip with Screamin’ Eagle logo protects the engine
from scratches.
94063-09 $34.95
For use on all Big Twin engines.
D. Screamin’ Eagle Flywheel Shaft
Ratchet Wrench
This high-quality ratcheting tool allows technician to manually
rotate the flywheel of the engine to check cam timing,
and to inspect valve-to-valve, piston-to-valve and piston-topiston
clearances. Designed to easily slip over the output
crankshaft spline, the wrench features a simple-to-use
finger-operated lever to reverse the ratcheting direction.
94038-09 24 Tooth Spline. $54.95
For use on ’06-later Dyna ® and ’07-later Touring and
Softail ® models.
94088-09 Sportster ® Spline. $39.95
For use on ’72-later XL and XR models.
94089-09 10 Tooth Spline. $39.95
For use on ’72-’06 Big Twin engines (except ’06
Dyna models).
A. Screamin’ Eagle Rocker Box Bolt
Ratcheting Wrench
B. Screamin’ Eagle Lower
Rocker Box Wrench
A. Screamin’ Eagle Rocker Box Bolt
Ratcheting Wrench
B. Screamin’ Eagle Lower
Rocker Box Wrench
C. Screamin’ Eagle Intake
Manifold Wrench
C. Screamin’ Eagle Intake
Manifold Wrench
94 Accessories
Special Tools
D. Screamin’ Eagle Flywheel Shaft
Ratchet Wrench
D. Screamin’ Eagle Flywheel Shaft
Ratchet Wrench

E. Screamin’ Eagle Nut Grabber
Lighted Pick-Up Tool Kit
E. Screamin’ Eagle Nut Grabber
Lighted Pick-Up Tool Kit
E. Screamin’ Eagle ® Nut Grabber Lighted
Pick-Up Tool Kit
Make picking up hard-to-get-to dropped nuts and bolts
an easier task with these unique pick-up tools. Both tools
feature illuminated tips for working in low-light areas, with
LED lamps that are brighter, more durable, and last longer
than traditional bulbs.
The lighted Claw Tool features a 22" long flexible reaching
arm that is tipped with an expanding four-finger gripping
claw. Easy to operate with one hand, you just push the
plunger to open the jaw and grip the object, and then release
to grab. The bright tip-mounted LED lamp automatically
switches on to help you search in low-light areas. Claw can
retrieve objects up to 5lbs.
The Magnetic Flashlight features a flexible telescopic arm
that extends 20" to reach into deep, tight areas. The powerful
magnetic tip can retrieve objects up to 3lbs. To help find
objects in low-light areas, the flexible tool is attached to a
powerful LED flashlight that illuminates the magnetic tip. You
can easily manipulate the tool and light with one hand.
94148-10 $39.95
F. Screamin’ Eagle Chrome Protective
Sockets – Black Finish
Unique internal composite material protects the chrome
finish on fasteners when these sockets are used. Mirror black
finish, with laser etched SE logo, torque limit and size on each
socket.
94670-08 $159.95
(9) 3/8" Drive Sockets 3/8"-15/16". SAE Standard.
94666-08 $149.95
(8) 3/8" Drive Sockets 8mm-15mm. Metric.
G. Induction Alignment Bracket Kit
The Induction Alignment Bracket Kit provides exact alignment
and easy installation of engine intake manifolds,
preventing intake air leaks.
40054-01 $19.95
For use on Twin Cam and Evolution ® 1340 engines equipped
with CV Carburetors or Electronic Fuel Injection. Does not
work with Original Equipment or SE 50/58mm ETC throttle
bodies (SE P/N 27713-08) or SE 58/62mm Cable Drive
Trottle Bodies P/N 27639-07A and 27300019.
F. Screamin’ Eagle Chrome Protective Sockets – Black Finish
G. Induction Alignment Bracket Kit
Accessories 95
Special Tools

14176-87A 41
15362-98 41
16101-01 64
16140-87 58
16160-99 18
16161-99 18
16177-99 18
16503-01 64
16505-01A 64
16546-99 44
16549-99 44
16550-04C 44
16551-04A 44
16554-92A 58
16555-07A 44
16556-07 44
16677-05 58
16677-07 58
16851-98A 56
16854-98A 56
16871-99Y 58
16925-08 50
16934-08 50
16952-08 51
16953-08 51
16954-02A 58
17004-01 64
17044-08 51
17046-98 64
17048-98 86
17050-08 51
17056-01 64
17071-08A 51
17072-08A 51
17378-98 61
17396-08 61
17578-10 61
17675-01B 61
17799-10 22
17987-98A 62
17997-99A 62
18013-03A 60
18209-06 60
18226-03 60
18273-00 60
18281-02A 60
18344-05 60
18400-03 62
18401-03 62
18402-03 62
18403-03 62
18404-08 62
18416-04 62
18424-06 62
18568-98 61
18572-07 61
19176-06C 17
19176-11 17
19206-11 20
19220-11 20
19255-05B 17
19256-05B 17
19258-06C 17
19258-11 17
19259-06C 17
19259-11 17
19260-10A 17
19261-11 17
19264-06C 17
19293-06C 17
19293-11 17
19296-06C 17
19569-11K 18
19643-11 17
19678-11 17
19863-11 17
19884-99 18
21914-08A 46
21915-08A 46
21916-08A 46
21928 46
21966-07 47
21968-07 47
22109 46
22123-08A 46
22137-08B 46
22141-08B 46
22143-08B 47
22144-08B 47
22179-99A 48
22193-98 56
22315-06A 64
22502-07 46
22503-07 46
22571-07B 46
22574-10 47
22575-07B 46
22576-10 47
22661-99A 48
22698-01A 58
22700-01A 58
22711-04A 58
22767-98 56
22851-99A 48
22853-99A 48
22868-00A 48
22870-00A 48
22942-00A 47
22944-00A 47
23600-00 45
23601-05 45
23703-02 45
23727-07A 45
23728-07A 45
23729-07A 45
23893-10 45
24004-03A 63
24017-10 63
24018-10 63
24601-10A 22
25121-03 54
25122-02 54
25133-04 54
25137-00 54
25149-00 54
25152-00 54
25155-00 54
25197-04 59
25282-07 63
25284-08 63
25285-08 63
25376-03 54
25422-97 57
25464-06 54
25465-06 54
25474-06 54
25475-06 54
25482-10 54
25483-10 54
25494-10 54
25503-10 54
25602-10 23
25638-07 54
25648-01 59
25648-91 59
25649-01A 59
25649-91 59
25740-05 59
25752-97 57
25753-97 57
25754-97 57
25937-99B 54
27082-10 23
27477-04 39
27501-09 13
27501-10 13
27504-09 13
27504-10 13
27505-10 13
27506-09 13
27508-09 13
27508-11 13
27513-08B 25
27514-08B 25
27516-08B 25
27517-08B 25
27525-08B 24
27526-08B 24
27532-08 14
27533-08 14
27534-10 15
27535-08 15
27536-08 15
27539-08 15
27540-08 15
27541-08 14
27543-08 14
27544-10A 26
27545-08 14
27548-10A 24
27557-08 14
27558-08 14
27559-08B 24
27561-08B 24
27564-09 14
27565-09 14
27566-09 14
27623-05A 36
27639-07A 36
27670-05 37
27713-08 36
27791-05 37
27796-08 37
27797-07 37
27800-08A 13
27801-08A 13
27927-07 38
27928-07A 38
27934-99 39
28716-10 32
28720-10 33
28721-10 31
28722-10 31
28728-10 41
28739-10 33
28740-10 33
28741-10 33
28742-10 33
28861-07A 52
29006-09A 32
29017-09 32
29042-04C 35
29045-97B 39
29066-03B 35
29080-09 32
29098-09 32
29119-08 35
29153-07 40
29170-08 35
29253-08A 32
29260-08 34
29264-08 32
29299-08 32
29319-08 35
29364-97 35
29382-97A 41
29383-97A 41
29387-97B 16
29406-08 34
29408-08 15
29414-07 38
29440-99D 34
29441-99A 34
29489-99C 34
29490-09 31
29492-99C 27
29493-05 32
29503-07 41
29506-09 40
29510-05 35
29515-08 34
29540-03 35
29541-03 35
29543-99B 35
29567-99 41
29586-06 35
29604-00A 39
29605-00A 39
29619-99 41
29620-99 41
29622-99 41
29624-08 35
29635-99 39
29636-99 39
29641-99 39
29667-07 36
29745-00A 40
29773-02C 34
29775-02B 27
29782-07A 16
29784-07 16
29793-02C 35
29836-10 27
29859-04A 27
29866-07A 13
29888-06 40
29893-07A 26
29894-07A 26
29898-06 40
29902-09 40
29903-07A 15
29904-07A 15
29915-09 31
29929-07 40
29935-98A 39
29936-98A 39
30003-10 16
30076-09 37
30086-10A 21
30087-10A 21
31653-97 68
31901-08 69
31902-08 69
31907-08 69
31930-99B 69
31932-99B 69
31937-99B 69
31939-99B 69
31944-99B 69
31946-99B 69
31956-04A 69
31958-04A 69
31963-89A 69
31964-89B 69
31965-08 69
31967-08 69
31987-85B 69
32076-04 52
32090-98 68
32091-98 68
32092-98A 69
32093-98A 69
32094-98 68
32095-98A 69
32101-10 29
32109-08B 29
32111-11 29
32184-08A 12, 29
32186-10 68
32187-10 68
32188-10 68
32189-10 68
32192-10 68
32303-08 69
32312-10 89
32318-08 69
32325-08 69
32359-00B 69
32360-00B 69
32565-97A 41
32566-97A 41
32743-99 41
32744-99 41
33005-06A 67
33005-99 67
33006-06A 67
33006-99 67
33034-03A 66
33040-03A 66
33044-03A 66
33045-03A 66
33100-03A 66
33101-03A 66
33102-03A 66
33103-03A 66
33104-03 66
33105-03 66
33118-11 67
33136-04 66
33137-04 66
33139-11 67
34822-08 63
34823-08 90
37931-84 65
37938-08KA 64
37951-98 65
37970-03A 65
37976-08 65
37980-10 65
38002-04 65
38752-04 67
38753-04A 67
40054-01 95
40274-08 64
60984-93R 41
60985-93R 41
64601-10 72
64806-07A 77, 78
64924-09 72
64981-09 82
64985-07A 84
65115-10 83
65247-09 74
65430-10 83
65694-05A 86
65829-00 86
65855-08 79
65858-08 79
66906-10 81
69779-09 69
70623-06 52
70623-08 52
70623-11 52
80102-97 73
80104-99 75
80366-99 75
80412-04 73
80415-04 73
80416-06 73
80417-06 73
80460-05 78
80491-07 82
80493-07 75
80494-07 76
80495-07 76
80497-07 77
80501-07 78
80502-07 71
80503-07 71
80601-09 74
80611-09 85
80621-10 77
80629-10 83
80630-10 83
80674-08 75
80678-08 75
80679-08 76
80680-08 77
80681-08 78
80716-08 86
80721-09 82
80726-09A 71
80732-09 84
80742-09A 82
80781-10 78
80794-10 74
80812-10 86
80813-10 76
80817-10 77
80818-10 76
80821-10 74
80824-10 76
80829-10 78
80846-10 80
80847-10 80
80881-10 80
80887-10 72
80892-10 84
92209-05 41
93979-10 93
93980-10 89
94038-09 94
94048-09 89
94057-09 94
94063-09 94
94074-09 94
94075-09 92
94076-09 92
94077-09 92
94078-09 91
94085-09 91
94086-09 93
94088-09 94
94089-09 94
94102-09 92
94107-09A 91
94129-09 91
94136-09 89
94137-09 92
94141-10 92
94144-09 91
94147-10 93
94148-10 95
94419-06 90
94638-08 90
94648-08 90
94666-08 95
94670-08 95
94845-10 93
94971-09 88
97005-02 40
99813-09 88
99824-03/00GL 88
99824-03/00QT 88
99850-92T 33
99881-87 88
99882-88T 33
99909-93R 88
14900002 92
14900003 93
14900004 90
14900008 89
14900011 89
14900014 90
16500013 52
16500045 44
16500046 14
21900001 22
21900002 22
24100004 45
24400001 22
27300019 23
29400013 23
41000008 12
41000018 12, 29
65100013 83
65100014 83
65100015 85
65100016 85
65100017 85
65100018 85
65100019 85
65600063 81
65600078 81
92500001 21
92500003 26
93600004 33
96 Screamin’ Eagle ® Pro racing
Part#/Page# cross Reference

TWIN CAM MODELS
103CI RACE UPGRADE KIT – TC 103 26
110CI RACE UPGRADE KIT – TC 110 24
113CI RACE KIT – TC 96 24
120CI RACE KIT – TC 96 21
AIR CLEANER COVERS 31-33, 40-41
AIR CLEANER/BREATHER KITS 31-35
BACKPLATE KIT – AIR CLEANER 35
BEARING KITS 63
BIG BORE KITS – RACE-USE 21, 24-27
BIG BORE KITS – Street-legal 13-15
CAM KITS 23, 53-55
CAM PLATE – BILLET 63
CARBURETOR KIT – FLATSLIDE 39
CARBURETOR KITS – CV 38-39
CLUTCH KITS 65
COMPENSATOR 64
COMPRESSION RELEASE 52
CRANKCASES 22
CRATE MOTORS – TWIN CAM 17, 20, 28
CYLINDER HEAD KIT – 110+ 51
CYLINDER HEAD KIT – FACTORY PORTED 52
CYLINDER HEAD KIT – HURRICANE 22
CYLINDER HEAD KIT – KOMPRESSOR 51
CYLINDER HEAD KIT – MCR PERFORMANCE 51
CYLINDER HEAD KIT – MVA 50
CYLINDER STUDS 64
CYLINDERS – BIG BORE 44
DYNOJET ® KITS 39
EFI TUNER 12, 29
ENGINE TRIM COLLECTION 41
EXHAUST GASKETS 86
HEAD GASKETS 64
HEAVY BREATHER AIR CLEANER 32-33
INJECTORS – EFI 37
INTAKE MANIFOLDS 23, 36, 38, 39
JIMS ® 120/131 CI TWIN CAM ENGINE 28
OIL PUMP 63
PISTONS 22, 46-49
PUSHRODS 62
RACE XTREME PARTS 22-23
ROCKER ARMS 61
ROCKER SUPPORTS/HOUSINGS 61
SE120R RACE ENGINE 20-23
SHIFT LIGHT 69
SPARK PLUG WIRES 69
SPARK PLUGS 68
STAGE I 103CI BIG BORE KIT – TC 96 15
STAGE I 110CI BIG BORE KIT – TC 96 13
STAGE I AIR CLEANER KIT – TC 88/96/103 31-34
STAGE II 103CI BIG BORE KIT – TC 103 26
STAGE II 103CI BIG BORE KIT – TC 96 14, 26
STAGE II 95CI BIG BORE KIT – TC 88 27
STAGE III 103CI BIG BORE KIT – TC 96 25
STAGE IV 103CI BIG BORE KIT – TC 96 25
STREET TUNER 12
STROKER FLYWHEEL KIT 45
SUPER TUNER 29
TAPPETS 61
THROTTLE BODY – 50MM EFI 36
THROTTLE BODY – 58MM EFI 36
THROTTLE BODY – 62MM EFI 23
TITANIUM SST PISTON RINGS 49
TRANSMISSIONS 66-67
TWIN CAM ENGINES – COMPLETE 17, 20, 28
VALVE SPRING KITS 60
VENTILATOR AIR CLEANER 31
Evolution ® 1340 MODELS
AIR CLEANER/BREATHER KIT 35
CAM KITS 57
CARBURETOR KITS 39
CLUTCH KITS 65
CRATE MOTORS – EVOLUTION 18
CYLINDER HEAD KIT 56
CYLINDER STUDS 64
DYNOJET KITS 39
ENGINE TRIM COLLECTION 41
EVOLUTION ENGINES – COMPLETE 18
INTAKE MANIFOLDS 39
PISTONS 56
PUSHRODS 62
ROCKER ARMS 61
SPARK PLUG WIRES 69
SPARK PLUGS 68
STAGE I KIT – EFI 16, 35
TAPPETS 61
TRANSMISSIONS 66-67
VALVE SPRING KITS 60
sportster ® MODELS
AIR CLEANER KITS 16, 35
CAM KITS 59
CARBURETOR KIT – 44MM CV 39
CLUTCH KITS 65
CYLINDER HEAD KIT 58
CYLINDER STUDS 64
CYLINDERS – BIG BORE 58
DYNOJET KITS 39
EFI TUNER 12, 29
ENGINE TRIM COLLECTION 41
HEAD GASKET 64
HEAVY BREATHER AIR CLEANER 32-33
PISTONS 58
PUSHRODS 62
ROCKER ARMS 61
SHIFT LIGHT 69
SPARK PLUG WIRES 69
SPARK PLUGS 68
STAGE I 883 TO 1200 CONVERSION KIT 16
STAGE I AIR CLEANER KIT 16, 35
STAGE II 883 TO 1200 CONVERSION KIT 27
STREET TUNER 12
SUPER TUNER 29
TAPPETS 61
VALVE SPRING KITS 60
VRSC MODELS
AIR CLEANER ELEMENT 35
CAM KITS 37
CLUTCH – SLIPPER 64
CRATE MOTORS – REVOLUTION ® 18
DESTROYER ® ENGINE COMPONENTS 37
EFI THROTTLE BODY 37
EFI TUNER 29
INJECTORS – EFI 37
REVOLUTION ENGINES – COMPLETE 18
SPARK PLUGS 68
STAGE II KIT 37
Exhaust
DYNA ® STREET PERFORMANCE 15, 74-75
END CAPS 83, 85
EXHAUST SHIELDS 72-78, 81, 82
EXHAUST WRAP 79
SOFTAIL ® STREET PERFORMANCE 76-78
SPORTSTER ® STREET PERFORMANCE 71-73
TOURING FATSHOTZ/NIGHTSTICK 80
TOURING STREET PERFORMANCE 80-86
Specialty
Tools/Lubricants
CAM/CRANK TOOLS 90-93
CASE BORING TOOL 90
CHAIN TENSIONER TOOL 92
CODE READER/DIAGNOSTICS 89
COMPRESSION RELEASE TOOLS 89, 90
O2 SENSOR TOOL 89
OIL/LUBRICANTS 88
PRIMARY/DRIVE LOCKING TOOLS 92, 93
TIMKEN ® BEARING TOOL 90
WRENCHES/SOCKETS 93, 94-95
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
Harley-Davidson ® Parts and Accessories
Division, a facility of Harley-Davidson
Motor Company, recently achieved
certification to its ISO 9001:2008
International Quality Standard
registration.
The sale or use of these parts or accessories does not grant
the purchaser a license or other right under any Harley-
Davidson patent.
IMPORTANT PLEASE READ: We have tried to make this
catalog comprehensive and factual. All product descriptions
(including depictions, specifications, dimensions, measurements,
ratings and competitive comparisons) are based on
available information at the time of publication. Although
such descriptions are believed correct, errors and changes
can occur and complete accuracy cannot be guaranteed.
Harley-Davidson may make changes at any time to prices
and specifications, and may change or discontinue any of
the items depicted in this catalog, without notice and without
incurring any obligation.
ATTENTION: Vehicles in the configurations shown and the
accessories described in this catalog may not be available for
sale or use in some locations. Please check with your dealer
for complete product details and the latest information.
Bar & Shield logo, Destroyer, Deuce, Dyna, Electra Glide,
Evolution, Fat Bob, Fat Boy, Harley, Harley-Davidson, HD,
H-D, Heritage Softail, Heritage Springer, Hugger, Revolution,
Road Glide, Road King, Screamin’ Eagle, Softail, Sportster,
Springer, Street Bob, Street Glide, Street Rod, Super Glide,
SYN3, Twin Cam 88, Twin Cam 88B, Twin Cam 96, Twin
Cam 96B, Twin Cam 103, Twin Cam 103B, Twin Cam 110,
Twin Cam 110B, Ultra Classic, V-Rod, VRSC, Wide Glide,
and the Harley-Davidson Genuine Motor Parts and Genuine
Motor Accessories Logo are among the trademarks of H-D
Michigan, LLC.
AHDRA, AMA, Dunlop, Dynojet, FullThrottle, JIMS, NHRA,
POWERade, Vance & Hines, Windows, Windows Vista and all
other third-party marks are property of their respective owners.
Screamin’ Eagle ® Pro racing
INDEX