SCREAMIN' PRO RACING PARTS EAGLE® - Harley-Davidson

E. ScrEamIn’ EaglE TWIn cam ForgED
rocKEr SuPPorTS
2 2
2
g. ScrEamIn’ EaglE rollEr rocKEr armS
high capacity
F. ScrEamIn’ EaglE Pro loWEr
rocKEr BoX houSIng
h. ScrEamIn’ EaglE Pro rocKEr
armS – 1.725:1 raTIo
3
E. ScrEamIn’ EaglE ® TWIn cam ForgED
rocKEr SuPPorTS
Increased strength rocker Supports will handle the increased
loads from higher lift cams and higher rPM applications. This
product keeps valve train geometry solid. Works with stock or
roller rocker arms. Includes required hardware for installation.
17675-01B $154.95
Fits ’99-later Twin Cam-equipped models.
F. ScrEamIn’ EaglE Pro loWEr
rocKEr BoX houSIng
eliminate the grinding and shaping required when installing
high-performance valve springs or heads. These lower
rocker box housings have been factory-machined to provide
the clearance required for large valve springs and collars,
ending the trial-and-error rework of the stock rocker boxes.
Housings are sold individually. Gaskets must be purchased
separately.
17578-10 $99.95
Fits ’99-later Twin Cam models equipped with 110+
Cylinder Heads, MVA Cylinder Heads, ACr Performance
Cylinder Heads, or heads equipped with Screamin’ eagle ®
race Valve Springs.
g. ScrEamIn’ EaglE rollEr rocKEr armS 2
unique roller-tip design increases strength and reduces valve
stem side-loading and tip friction. Built to handle cams with
up to .700" lift in high rPM application. Complete kit includes
set of four.
17378-98 $469.95
Fits ’84-’99 evolution ® -equipped 1340 models, ’86-later XL
and Xr models, and ’99-later Twin Cam-equipped models.
(Modification is required on Twin Cam rocker covers.)
h. ScrEamIn’ EaglE Pro rocKEr
armS – 1.725:1 raTIo
Manufactured from the forging used for Original equipment
rocker arms for enhanced integrity, these Screamin’ eagle
rocker Arms feature a lift ratio of 1.725:1 verses the stock
ratio of 1.65. The larger ratio will increase valve opening to
enhance power output on larger displacement engines. As
with all performance products, these rocker Arms should
be installed by a qualified technician to ensure appropriate
clearances between valves and pistons. Kit includes four
rocker arms. For race application only.
17396-08 $175.95
Fits ’84-’99 evolution ® 1340-equipped models, ’86-later XL
models, and ’99-later Twin Cam-equipped models.
I. ScrEamIn’ EaglE hIgh-caPacITy TaPPETS 2
Screamin’ eagle Tappets feature large high capacity needles
in the roller bearing assembly to improve reliability when
operating with high lift cams, high pressure valve springs,
and in high rPM applications. The 25% larger needle bearings
increase the dynamic load rating by approximately 20%
when compared to the Original equipment Twin Cam tappets.
The unique design delivers superior tappet life in performance
applications. Set of 4.
18572-13 $249.95
Fits ’99-later Twin Cam-equipped models and
’00-later XL and Xr models.
J. ScrEamIn’ EaglE TaPPETS 2
These Screamin’ eagle Tappets incorporate a unique axle,
roller and bearing design that increases durability and stability
of the tappets. Works well in high horsepower/high rPM
applications.
18568-98 $259.95
Fits ’84-’99 evolution ® 1340-equipped models, and
’86-’90 XL models. (set of 4)
2
2
3
Stock
2
2
I. ScrEamIn’ EaglE hIgh-caPacITy
TaPPETS
J. ScrEamIn’ EaglE TaPPETS
EngInE comPonEnTS 89
VALVe TrAIn