SCREAMIN' PRO RACING PARTS EAGLE® - Harley-Davidson

a. ScrEamIn’ EaglE ® racE
ValVE SPrIng KIT*
This straight coil double spring race Valve Spring Kit will
allow the engine to rev to 7000 rPM, and enable the use of
higher lift cams. Complete kit includes springs, upper and
lower collars, and valve keys.
18344-05 7mm dia. Valve Stems. $164.95
Fits ’04-later XL models, and ’05-later Twin Cam models
with stock cylinder heads. Will not fit CVO 103ci and
110ci models, or models equipped with
Screamin’ eagle ® cylinder heads.
18281-02a 5/16" dia. Valve Stems. $164.95
Fits ’99-’04 Twin Cam, all evolution ® 1340, and
’86-’03 XL models. (not shown)
B. ScrEamIn’ EaglE PErFormancE
ValVE SPrIng KIT*
This performance Beehive-shaped Valve Spring Kit will permit
the Sportster ® engine to rev to 7000 rPM. The unique ovate
wire yields increased performance from a compact spring
design. The installed spring pressure is increased to 208 lbs,
and allows a maximum lift of .575". Complete kit includes
springs, upper collars and keepers, and lower collars with
integral valve seals.
18013-03a $149.95
Fits ’04-later XL, Xr and ’05-later Twin Cam-equipped
models. Does not fit Screamin’ eagle Performance Heads
with 5/16" diameter valves.
c. ScrEamIn’ EaglE ValVE SPrIng KITS* 2
These Screamin’ eagle Valve Spring Kits have been designed
to provide the engine builder with a choice for the various
engine combinations that can be built with Screamin’ eagle
performance parts. refer to the chart below to choose a
Spring Kit that best suits your application.
2
2
Fits ’99-’04 Twin Cam, all evolution ® 1340, and ’86-’03 XL
models.
18209-06 5/16" dia. Valve Stems:
.585 Lift Max. $149.95
18273-00 5/16" dia. Valve Stems:
.585 Lift Max. $149.95
D. ScrEamIn’ EaglE ValVE SPrIng ShIm KIT 2
This Valve Spring Shim Kit allows the engine builder to adjust
spring pressure by combining various thickness shims. The
kit is a great help when trying to obtain consistent spring
pressure across all valves. Kit includes 12 shims (4 each:
.015", .030", .060" thickness).
18226-03 $11.95
Fits ’04-later XL and ’05-later Twin Cam models equipped
with Valve Spring Kit P/n 18344-05. Also fits ’99-’04 Twin
Cam, all evolution 1340, and ’86-’03 XL models equipped
with Valve Spring Kit P/n 18013-03A.
2
a. ScrEamIn’ EaglE racE ValVE SPrIng KIT
2
c. ScrEamIn’ EaglE ValVE SPrIng KITS
2
B. ScrEamIn’ EaglE PErFormancE
ValVE SPrIng KIT
2
D. ScrEamIn’ EaglE ValVE SPrIng ShIm KIT
Spring Kit
(Valve Force at 1.800" Recommended Spring Force RPM Spring Cam
Stem Dia.) Installed Height Max Lift at Max Lift Range Type Application Notes
18013-03a 208 .585 380 0-6500 Ovate SE203, used on SE Xl,
(7mm) Beehive 204, 211,
253, 255,
258, 259E
OE cNc Ported
and SE kompressor
Twin cam Heads.
18344-05 195 .660 520 0-7000 Double SE251,
N/a
(7mm)
wound 260, 264,
263E, 266E
18209-06 146 .585 350 0-6000 Double SE203, used on SE 1340
(5/16") wound 204, 211 EVO cylinder
Heads.
18273-00 174 .585 448 0-6500 Double SE253, 254E used on cVO 103,
(5/16") wound with 255, 257, cVO 110, and
dampener 258, 259E Twin cam Heads.
*noTIcE: Proper valve spring to rocker cover clearance
must always be verified during installation of Screamin’ Eagle
Valve Spring kits. Failure to have adequate clearance may
result in engine damage.
88 EngInE comPonEnTS
VALVe SPrInGS
18281-02a 195 .660 520 0-7000 Double SE251, 260 used on SE mVa
wound 264, 263E, and SE 110+
266E, rX267
ScrEamIn’ EaglE ValVE SPrIng KIT charT