SCREAMIN' PRO RACING PARTS EAGLE® - Harley-Davidson

c. ScrEamIn’ EaglE Pro cranKcaSE
SET – alPha
3 3
c. ScrEamIn’ EaglE Pro cranKcaSE
SET – BETa
D. craTE EngInE ShorTBlocK aSSEmBly – BlacK 1584cc/1690cc
2
3
c. ScrEamIn’ EaglE ® Pro
cranKcaSE SET
These Screamin’ eagle ® Twin Cam crankcases are precisely
machined with the larger cylinder bores required to accept
4.060" cylinders and can be used to build 113CI and 120CI
motors. The Crankcase is pre-assembled with Screamin’
eagle Piston Oil Jets designed to accommodate a 4-3/8"
or 4-5/8" Stroker Crank Assembly, and features factoryinstalled
high-capacity Lefty main bearing, right side
bearing, and Screamin’ eagle high-performance cam bearings.
Includes Manufacturers Statement of Origin (MSO).
For race application only.
24601-10a $649.95
Fits ’06-later Dyna ® and ’07-later Touring models.
24400001 $699.95
Fits ’07-later Softail ® models.
24400031 $799.95
Fits ’99-’05 Dyna and ’99-’06 Touring models.
24400033 $799.95
Fits ’00-’06 Softail models.
D. craTE EngInE ShorTBlocK aSSEmBly 2
The perfect starting point for building the engine of your
dreams. engine shortblocks are manufactured and assembled
on Harley-Davidson’s main engine assembly line
for exceptional quality and reliability. Shortblock cases,
flywheels, bearings and rods are preassembled and ready
for your custom build. Kit includes current spec Original
equipment cam plate, oil pump, cam drive components,
and the gaskets,seals and most of the hardware required
to complete the engine and install it (not all components
shown). you select your cylinders, heads, cams, covers and
other top-end components. Choose one of the Screamin’
eagle Stage kits to incorporate reliable performance and
pick from our decorative engine covers to customize the look.
Shortblock Assemblies are stamped with a new VIn number,
and include MSO (Manufacturers Statement of Origin). The
MSO is for Domestic only. Kits ship directly from the factory
within 3-5 days.
16200070 Black 96CI/103CI. $1,695.00
Fits ’07-later Dyna and Touring models (except CVO).
16200071 Black 96CI/103CI. $1,995.00
Fits ’07-later Softail models (except CVO).
E. ScrEamIn’ EaglE “hIgh TEnSIlE”
cylInDEr STuD KIT
This 8-piece High Tensile Cylinder Stud Kit is a must for the
serious engine builder. The studs feature a unique thread
design and enhanced material properties to withstand the
forces of a high-compression engine.
16505-01 $49.95
Fits ’99-later Twin Cam-equipped models.
16503-01 $49.95
Fits ’84-’99 evolution ® 1340-equipped models.
17004-01 $49.95
Fits ’86-later XL models. For XL1200 models with
compression ratio over 10:1, use with High-Performance
Head Gasket Kit P/n 17056-01.
F. ScrEamIn’ EaglE PISTon oIl JET aSSEmBly 2
This unique oil jet is designed to provide additional piston
skirt clearance when used with flywheels featuring a stroke
longer than the 4-3/8" Original equipment configuration.
This oil jet will provide appropriate clearance for flywheels
with stroke up to 4-5/8" when used with Screamin’ eagle
pistons. Two required.
22315-06a $17.95
Fits ’99-later Dyna, Touring and ’00-later Softail models.
2
E. ScrEamIn’ EaglE “hIgh TEnSIlE”
cylInDEr STuD KIT
2 2
F. ScrEamIn’ EaglE PISTon oIl
JET aSSEmBly
cranKcaSE & ShorT BlocK aSSEmBlIES 71
TWIn CAM MODeLS