SCREAMIN' PRO RACING PARTS EAGLE® - Harley-Davidson

3
a. ScrEamIn’ EaglE ® Pro SuPEr BorE
51mm cV carBurETor KIT
This is the highest-flowing carburetor Screamin’ eagle has
ever tested. It will satisfy the flow need of the largest V-twins.
This Harley-Davidson exclusive kit is complete with carb,
higher-flow air cleaner and mounting hardware. This is the
largest CV-style carb available and has easy access to main
and pilot jets without removing the bowl. recommended for
engines 95 cubic inch and larger. uses stock throttle cables.
The 51mm CV Carburetor is not cruise control compatible.
For race application only.
27928-07a $629.95
Fits ’99-’06 carbureted Twin Cam models. requires
separate purchase of Intake Manifold P/n 27927-07. (not
compatible with standard HTCC Heads, Harley-Davidson
Air Cleaner Cover P/n 29754-01, 29598-00, 29599-00, or
Screamin’ eagle Teardrop Air Cleaner P/n 29409-02.)
3
B. ScrEamIn’ EaglE Pro hIgh-FloW InTaKE
manIFolD – 51mm SuPEr BorE carBurETor
This manifold is designed for use with Screamin’ eagle ® Pro
Super Bore 51mm CV Carburetor P/n 27926-02A (sold
separately). Large manifold eliminates restrictions and
is machined for precision alignment to Screamin’ eagle
accessory cylinder head intake flange dimensions. For race
application only.
29414-07 $89.95
Fits ’99-’06 carbureted Twin Cam models. This manifold
has intake runners which are .100" larger in diameter than
all stock Twin Cam heads and early Screamin’ eagle
performance cylinder heads. The intake port diameter in
the cylinder heads should be 1.750", if not; an experienced
engine builder can open the cylinder head ports to this
diameter to ensure a smooth transition and air-flow. The
intake flanges supplied in this kit will only fit cylinder heads
machined for use with the stock symmetrical intake flanges
(Oe since My06). All Screamin’ eagle performance cylinder
heads (except Kompressor) with kit P/n extension of -06 or
later have a intake port diameter of 1.750" and are
machined for use with symmetrical intake flanges.
27927-07 $109.95
Fits ’99-’06 carbureted Twin Cam models. This manifold
has intake runners which are the same diameter as all stock
Twin Cam heads and early Twin Cam performance heads.
Install using stock intake flanges.
3
a. ScrEamIn’ EaglE Pro SuPEr BorE 51mm cV carBurETor KIT
3
60 InTaKE PErFormancE ParTS
CArBureTOr KITS
B. ScrEamIn’ EaglE Pro hIgh-FloW InTaKE manIFolD – 51mm SuPEr BorE carBurETor