Unit 4.54905 - Harken

More documents

Recommendations

Info

ASSEMBLY Lower Toggle and Cowling ■ INSTALL LOWER TOGGLE AND COWLING The integral toggle can be installed so the clevis pin runs either fore/aft or athwartships. Choose the correct hole in the base and use the cross pin to secure the lower toggle so clevis pin runs the correct direction. Slip the cowling in place. Secure using the circlip provided. 14 Hydraulic Furling 4.5 April 2000
ASSEMBLY Torque Tube ■ INSTALL TORQUE TUBE Secure the torque tube to the lower unit using the six cap screws provided. Use blue Loctite on the screws. TIP: Insert all six screws BEFORE tightening. ■ RAISE FOILS Push the foils to the correct height and use an allen wrench to secure the torque tube to the foils using the three screws provided. Use blue Loctite on the screws. April 2000 Hydraulic Furling 4.5 15
Page 1 and 2: Hydraulic Furling Installation Manu
Page 3 and 4: GENERAL SPECIFICATIONS Unit 4.5 ■
Page 5 and 6: GENERAL SPECIFICATIONS Parts List
Page 7 and 8: PREPARATION Headstay Length ■ HEA
Page 9 and 10: PREPARATION Cutting Top Foil ■ NO
Page 11 and 12: ASSEMBLY Foils Coat three foil scre
Page 13: ASSEMBLY Attach Stay - Wire ■ ATT
Page 17 and 18: ASSEMBLY Raise Furling • Gearbox
Page 19 and 20: ADJUSTMENTS Headstay Tension ■ AD
Page 21 and 22: ADJUSTMENTS Pendants ■ PENDANTS I
Page 23 and 24: ADJUSTMENTS Before Operation • Ma

Unit 4.54905 - Harken

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?